[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

The number of entries in the CallLog table.

The value MUST be less than or equal to Capabilities.MaxCallLogCount.

Value Change Notification requests for this parameter MAY be denied.

Maximum total number of CallControl.Line objects supported.

A value of -1 indicates no specific limit on the number of lines.

Maximum total number of CallControl.Extension objects supported.

A value of -1 indicates no specific limit on the number of extensions.

Maximum total number of CallLog objects supported.

A value of -1 indicates no specific limit on the number of call logs.

Maximum number of voice sessions supported for any given CallControl.Line object. A value greater than one indicates support for CPE-provided conference calling.

A value of -1 indicates no specific limit on the number of voice sessions per line.

Maximum number of voice sessions supported for any given CallControl.Extension object. A value greater than one indicates support for CPE-provided conference calling.

A value of -1 indicates no specific limit on the number of voice sessions per extension.

Maximum total number of voice sessions supported across all CallControl.Line objects. (This might differ from MaxLineCount if each line can support more than one session for CPE-provided conference calling. This value MAY be less than the product of MaxLineCount and MaxSessionsPerLine.)

A value of -1 indicates no specific limit on the number of voice sessions.

Comma-separated list of strings. Each item is a supported network connection mode. Each list item matches one of:

• SIP(/\d+\.\d+)?
• MGCP(/\d+\.\d+)?
• MGCP-NCS(/\d+\.\d+)?
• H\.248(/\d+\.\d+)?
• H\.323(/\d+\.\d+)?
• DSS1
• FXO
• X_.+

Most entries MAY be appended with a version indicator in the form “/X.Y”. For example:

“SIP/2.0”

The list MAY include vendor-specific modes, which MUST be in the format defined in [TR-106]. For example:

“X_EXAMPLE-COM_MyMode”

Comma-separated list of strings. Each item is a supported user connection mode. Each list item matches one of:

• SIP(/\d+\.\d+)?
• DSS1
• FXS
• DECT(/\d+\.\d+)?
• Button
• Virtual
• X_.+

Most entries MAY be appended with a version indicator in the form “/X.Y”. For example:

“SIP/2.0”

The list MAY include vendor-specific modes, which MUST be in the format defined in [TR-106]. For example:

“X_EXAMPLE-COM_MyMode”

Comma-separated list of strings. Each item is a supported tone file format. The specified file formats are raw codec data files, using one of the codecs listed below. Each list item is an enumeration of:

• G.711MuLaw
• G.711ALaw
• G.729
• MP3
• WAV
• AMR

The list MAY include vendor-specific -specific extensions, which MUST use the format defined in [TR-106].

Example:

“G.711MuLaw, MP3, X_EXAMPLE-COM_MyFileFormat”

If the CPE does not support tone files, this parameter MUST be an empty string.

Comma-separated list of strings. Each item is a supported ring file format. Each list item is an enumeration of:

• MIDI
• SMAF (MMF)
• RTTTL (RTTTL or RTX)
• MP3
• WAV
• AMR

The list MAY include vendor-specific-specific extensions, which MUST use the format defined in [TR-106].

Example:

“MIDI, AMR, X_EXAMPLE-COM_MyFileFormat”

If the CPE does not support ring files, this parameter MUST be an empty string.

Comma-separated list of strings. The facility actions supported by this VoiceService. Each list item is an enumeration of:

• AA_REGISTER (Register an “Abbreviated Address” and corresponding destination. Abbreviated Addressing permits a user to define short numbers (within a particular range) to represent commonly used destinations)
• AA_ERASE (Remove an “Abbreviated Address”)
• AA_INTERROGATE (Interrogate the status of an “Abbreviated Address”)
• CA_ACTIVATE (Make this call an anonymous call)
• CCBS_ACTIVATE (Activation of Call Completion to Busy Subscriber. Call completion to Busy Subscriber is a facility that permits the user to request an automatic call back when a currently busy destination becomes available)
• CCBS_DEACTIVATE (Deactivation of Call Completion to Busy Subscriber)
• CCBS_INTERROGATE (Interrogation of the Call Completion to Busy Subscriber status and destination)
• CCNR_ACTIVATE (Activation of Call Completion on No Reply. Call completion on no reply is a facility that permits the user to request an automatic call back when activity (eg a phone call is made) is detected from a destination from which there is currently no reply)
• CCNR_DEACTIVATE (Deactivation of Call Completion on No Reply)
• CCNR_INTERROGATE (Interrogation of the Call Completion on No Reply status and destination)
• CFB_REGISTER (Register the destination for Call Forwarding on Busy. Set the parameter CallControl.CallingFeatures.Set.{i}.CallForwardOnBusyNumber of this extension. If Call Forwarding on Busy is activated, the call will be forwarded to the specified destination if the extension is “busy”)
• CFB_ACTIVATE (Activate Call Forwarding on Busy to the registered destination)
• CFB_DEACTIVATE (Deactivate Call Forwarding on Busy to the registered destination)
• CFB_ERASE (Erase the registered Call Forwarding on Busy Destination)
• CFB_INTERROGATE (Interrogate the registered Call Forwarding on Busy Destination)
• CFNR_REGISTER (Register the destination for Call Forwarding on No Reply. Set the parameter CallControl.CallingFeatures.Set.{i}.CallForwardOnNoAnswerNumber of this extension. If Call Forwarding on No Reply is activated, the call will be forwarded to the specified destination if the extension does not reply before the time expires)
• CFNR_ACTIVATE (Activate Call Forwarding on No Reply to the registered destination)
• CFNR_DEACTIVATE (Deactivate Call Forwarding on No Reply to the registered destination)
• CFNR_ERASE (Erase the registered Call Forwarding on No Reply Destination)
• CFNR_INTERROGATE (Interrogate the registered Call Forwarding on No Reply Destination)
• CFNR_TIMER (Set the parameter CallControl.CallingFeatures.Set.{i}.CallForwardOnNoAnswerRingTimeout of this extension)
• CFT_ACTIVATE (Activate Call Forwarding Timed. This facility permits the user to forward calls to particular destinations depending on the time of day : cf. table CallControl.CallingFeatures.Set.{i}.CFT.{i}.)
• CFT_DEACTIVATE (Deactivate Call Forwarding Timed)
• CFT_INTERROGATE (Interrogate the status of Call Forwarding Timed)
• CFU_REGISTER (Register the destination for Call Forwarding Unconditional. Set the parameter CallControl.CallingFeatures.Set.{i}.CallForwardUnconditionalNumber of this extension. If Call Forwarding on Busy is activated, the call will be forwarded to the specified destination if the extension is “busy”)
• CFU_ACTIVATE (Activate Call Forwarding Unconditional to the registered destination)
• CFU_DEACTIVATE (Deactivate Call Forwarding Unconditional to the registered destination)
• CFU_ERASE (Erase the registered Call Forwarding Unconditional Destination)
• CFU_INTERROGATE (Interrogate the registered Call Forwarding Unconditional Destination)
• CLIR_ACTIVATE (Activate Calling Line Identification Restriction (i.e. your calling number will be restricted). Set the parameter CallControl.CallingFeatures.Set.{i}.AnonymousCallEnable to true)
• CLIR_DEACTIVATE (Deactivate Calling Line Identification Restriction)
• CLIR_INTERROGATE (Interrogate the Calling Line Identification status)
• CP_INVOKE (Invoke Carrier Prefix. The prefix is prepended to the destination number. The facility argument will reference the Carrier Prefix)
• CW_ACTIVATE (Activate Call Waiting. Set the parameter CallControl.CallingFeatures.Set.{i}.CallWaitingEnable to true)
• CW_DEACTIVATE (Deactivate Call Waiting)
• CW_INVOKE (Used for answering a waiting call or switching between calls)
• DND_ACTIVATE (Activate Do Not Disturb on the extension. Set the parameter CallControl.CallingFeatures.Set.{i}.DoNotDisturbEnable of this extension. Selective Ringing is a facility that permits the user to specify the generation of different ring tones depending on the calling number)
• DND_DEACTIVATE (Deactivate Do Not Desturb)
• DND_INTERROGATE (Interrogate the status of Do Not Disturb)
• EXT_INVOKE (Invoke an extension. The extension referenced in the facility argument will be used as destination instead of the line defined in CallControl.OutgoingMap.{i}.)
• LINE_INVOKE (Invoke a line. The line referenced in the facility argument will be used for an outgoing call instead of the line defined in CallControl.OutgoingMap.{i}.)
• MAILBOX_INVOKE (Invoke a mailbox. The interactive menu to listen and manipulate voicemail messages will be invoked)
• OCB_ACTIVATE (Activate Outgoing Call Barring. Outgoing call barring is a facility that permits the user to bar calls to certain destinations—usually depending on the cost of a call)
• OCB_DEACTIVATE (Deactivate Outgoing Call Barring)
• OCB_INTERROGATE (Interrogate Outgoing Call Barring)
• PSO_ACTIVATE (Switch the call to a PSTN line)
• PW_SET (Set the password used for controlling access to the Facility Actions)
• SCF_ACTIVATE (Activate Selective Call Forwarding. This facility permits the user to forward calls to different destinations depending on the calling number : cf. table CallControl.CallingFeatures.Set.{i}.SCF.{i}.)
• SCF_DEACTIVATE (Deactivate Selective Call Forwarding)
• SCF_INTERROGATE (Interrogate the status of Selective Call Forwarding)
• SCREJ_ACTIVATE (Activate Selective Call Rejection. This facility permits the user to selectively reject calls depending on the calling number : cf. table CallControl.CallingFeatures.Set.{i}.SCREJ.{i}.)
• SCREJ_DEACTIVATE (Deactivate Selective Call Rejection)
• SCREJ_INTERROGATE (Interrogate the status of Selective Call Rejection)
• SR_ACTIVATE (Activate Selective Ringing. Selective Ringing is a facility that permits the user to specify the generation of different ring tones depending on the calling number)
• SR_DEACTIVATE (Deactivate Selective Ringing)
• SR_INTERROGATE (Interrogate the status of Selective Ringing)

The list MAY include vendor-specific Facility Actions, which MUST use the format defined in [TR-106].

Facility Actions are referenced in the VoiceService data model in the objects CallControl.NumberingPlan.{i}.PrefixInfo.{i}. and Terminal.{i}.ButtonMap.Button.{i}..

Comma-separated list of strings. Each item is a supported SIP extension method among the methods listed in the IANA SIP parameters registry (see [IANA_SIP_Methods]). SIP extension methods MUST be in the form of the method name in upper case.

The list MAY include vendor-specific extensions, which MUST use the format defined in [TR-106].

Examples:

“REFER”

“INFO”

“X_EXAMPLE-COM_MyExt”

Comma-separated list of strings. Each item is a supported URI scheme beyond the URI schemes REQUIRED by the SIP specification ([RFC3261]). Each URI scheme is given by the URI prefix, without the colon separator. Example:

“tel, fax”

Comma-separated list of strings. Each item is a supported event package among the event packages listed in the IANA registry for SIP Event Type Namespace (see [IANA_Event_Packages]).

The list MAY include vendor-specific event packages, which MUST use the format defined in [TR-106].

Examples:

“call-completion”

“presence”

“X_EXAMPLE-COM_MyEvtPkg”

Comma-separated list of strings. Each item is a supported authentication protocol for TLS transport. Each list item is an enumeration of:

• Null
• MD5
• SHA-1
• SHA-2
• AEAD

The list MAY include vendor-specific protocols, which MUST use the format defined in [TR-106].

Comma-separated list of strings. Each item is a supported encryption protocol for TLS transport. Each list item is an enumeration of:

• Null
• RC4
• RC2
• DES
• 3DES
• AES
• Camellia

The list MAY include vendor-specific protocols, which MUST use the format defined in [TR-106].

Comma-separated list of strings. Each item is a supported key exchange protocol for TLS transport. Each list item is an enumeration of:

• RSA
• DSS
• DHE-RSA
• DHE-DSS
• ECDHE-RSA
• ECDHE-ECDSA

The list MAY include vendor-specific protocols, which MUST use the format defined in [TR-106].

Comma-separated list of strings. Each item is a supported SIP extension method among the methods listed in the IANA SIP parameters registry (see [IANA_SIP_Methods]). SIP extension methods MUST be in the form of the method name in upper case.

The list MAY include vendor-specific extensions, which MUST use the format defined in [TR-106].

Examples:

“REFER”

“INFO”

“X_EXAMPLE-COM_MyExt”

Comma-separated list of strings. Each item is a supported URI scheme beyond the URI schemes REQUIRED by the SIP specification. Each URI scheme is given by the URI prefix, without the colon separator. Example:

“tel, fax”

Comma-separated list of strings. Each item is a supported event package among the event packages listed in the IANA registry for SIP Event Type Namespace (see [IANA_Event_Packages]).

The list MAY include vendor-specific event packages, which MUST use the format defined in [TR-106].

Examples:

“call-completion”

“presence”

“X_EXAMPLE-COM_MyEvtPkg”

Comma-separated list of strings. Each item is a supported authentication protocol for TLS transport. Each list item is an enumeration of:

• Null
• MD5
• SHA-1
• SHA-2
• AEAD

The list MAY include vendor-specific protocols, which MUST use the format defined in [TR-106].

Comma-separated list of strings. Each item is a supported encryption protocol for TLS transport. Each list item is an enumeration of:

• Null
• RC4
• RC2
• DES
• 3DES
• AES
• Camellia

The list MAY include vendor-specific protocols, which MUST use the format defined in [TR-106].

Comma-separated list of strings. Each item is a supported key exchange protocol for TLS transport. Each list item is an enumeration of:

• RSA
• DSS
• DHE-RSA
• DHE-DSS
• ECDHE-RSA
• ECDHE-ECDSA

The list MAY include vendor-specific protocols, which MUST use the format defined in [TR-106].

Comma-separated list of strings. Each item is a supported optional MGCP package. MGCP packages are listed using the uppercase package abbreviation.

The list MAY include vendor-specific extensions, which MUST use the format defined in [TR-106].

Examples:

“BP”

“X_EXAMPLE-COM_MyExt”

Comma-separated list of strings. Each item is a supported authentication method. Each list item is an enumeration of:

• dhExch (Diffie-Hellman)
• pwdSymEnc (password with symmetric encryption)
• pwdHash (password with hashing)
• certSign (certificate with signature)
• ipsec (IPsec based connection)
• tls (TLS)

The list MAY include vendor-specific protocols, which MUST use the format defined in [TR-106a7].

The external ISDN ports support one or more of the followings AOC-services:

[I.256.2a] Charging supplementary services: Advice of charge: charging information at call set-up time (AOC-S)

[I.256.2b] Charging supplementary services: Advice of charge: charging information during the call (AOC-D)

[I.256.2c] Charging supplementary services: Advice of charge: charging information at the end of the call (AOC-E)

The external ISDN ports support [I.252.7] Call offering supplementary services:

Explicit call transfer (ECT)

The supported supported dial type.

Enumeration of:

• Tone (Supports Tone dialling)
• Pulse (Supports Pulse dialling)
• Tone and Pulse (Supports Tone and Pulse dialling)

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Identifier of the type of codec. Enumeration of:

• AMR
• Clearmode (RFC4040)
• EVRC1
• EVRCB1
• G.711MuLaw
• G.711ALaw
• G.726
• G.729
• G.729.1
• G.729a
• G.729e
• G.728
• G.723.1
• G.722
• G.722.1
• G.722.2
• Generic Comfort Noise (RFC3389)
• GSM-FR
• GSM-HR
• GSM-EFR
• iLBC
• Speex

The parameter MAY instead be a vendor-specific codec, which MUST be in the format defined in [TR-106]. For example:

“X_EXAMPLE-COM_MyCodec”

Comma-separated list of strings (maximum number of characters per item 64). Each item is a supported packetization period, in milliseconds, or a continuous range of packetization periods. Ranges are indicated as a hyphen-separated pair of unsigned integers. Examples:

“20” indicates a single discrete value.

“10, 20, 30” indicates a set of discrete values.

“5-40” indicates a continuous inclusive range.

“5-10, 20, 30” indicates a continuous range in addition to a set of discrete values.

A range MUST only be indicated if all values within the range are supported.

Comma-separated list of supported models for evaluation of VoIP Quality Indicator. An empty string indicates that CPE does not support evaluation of this indicator.

The entry MAY include vendor-specific models, which MUST be in the format defined in [TR-106].

For example: “P.564,G.107,X_EXAMPLE-COM_MyModel”

Specifies the maximum number of QI values which can be reported for a session. If this parameter is empty there is no specified maximum limit.

If possible this limit SHOULD be large enough to handle at least 10 to 15 minutes of call time, which would typically mean 60 to 90 quality values for commonly used quality models.

Range of ports reserved for use by the CPE on any WAN interface. Comma-separated list of strings. Each range consists of a Start part consisting of 1 to n digits (string representation) followed by an OPTIONAL End part consisting of 1 to n digits prefixed by a “-” symbol.

Example:

12345-12350,23580

Range of ports reserved for use by the CPE on any LAN interfaces. Comma-separated list of strings. Each range consists of a Start part consisting of 1 to n digits (string representation) followed by an OPTIONAL End part consisting of 1 to n digits prefixed by a “-” symbol.

Example:

12345-12350,23580

Indicates the status of this physical interface.

Enumeration of:

• Up
• Error
• Testing
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Specify the type of application that uses the interface.

Enumeration of:

• VoIP
• VoATM
• Data

Specifies the protocol variant used for the interface. Enumeration of:

• EuroISDN (ETSI defined Euro ISDN (DSS1))
• NI-1 (National ISDN-1 (Bellcore))
• NI-2 (National ISDN-2 (Bellcore)))
• 5ESS (AT&T ISDN)
• NTT (Japanese NTT ISDN)
• VN3 (French VN3 ISDN)
• VN4 (French VN4 ISDN)
• Q.SIG

The list MAY include vendor-specific protocols, which MUST use the format defined in [TR-106].

Protocol emulation for the interface.

Enumeration of:

• TE
• NT

TEI management mode. It MUST be set to Dynamic for ISDN phones or connection to an ISDN network and Static for PBX.

Enumeration of:

• Static
• Dynamic

Indicates the status of this physical interface.

Enumeration of:

• Up
• Error
• Testing
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Specify the type of application that uses the interface.

Enumeration of:

• VoIP
• VoATM
• Data

Specifies the protocol variant used for the interface. Enumeration of:

• EuroISDN (ETSI defined Euro ISDN (DSS1, E-DSS1))
• NI-1 (National ISDN-1 (Bellcore))
• NI-2 (National ISDN-2 (Bellcore)))
• 4ESS (AT&T 4ESS ISDN)
• 5ESS (AT&T 5ESS ISDN)
• NTT (Japanese INS-NET1500 ISDN)
• Q.SIG

The list MAY include vendor-specific protocols, which MUST use the format defined in [TR-106].

Specify the protocol emulation for this interface.

Enumeration of:

• TE
• NT

Specify the physical line coding to be used.

Enumeration of:

• ami
• hdb3
• b8zs

Specify the framing type.

Enumeration of:

• None (no framing. Only used for CES / unstructured mode)
• DF (double frame, no CRC4. For E1 only)
• MF (multiframe (CRC4). For E1 only)
• EMF (extended multiframe (CRC4). For E1 only)
• SF (super-frame. For T1 only)
• ESF (extended super frame. For T1 only)
• AutoDetect (used to find automatically ISDN PRI framing by trying all possible detections. This behavior can be set when the configuration of remote)

Enumeration of:

• T1
• E1

Determines the role of the CPE for the purpose of clock synchronisation on this interface.

Enumeration of:

• Master
• Slave

The geographic region associated to POTS (MUST be an alpha-2 (two-character alphabetic) country code as specified by [ISO3166-1]). This MAY be used by the CPE to customize localization settings.

If an empty string, indicates that the region is unspecified and the CPE SHOULD use default localization settings.

Indicates the status of this physical interface.

Enumeration of:

• Up
• Error
• Testing
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Enables the second step dialing mode.

If false, incoming dialed digits are processed through the voice routing table.

If true, the FXO port goes directly to the off-hook state and works as a FXS port for the dialing reception (a dial-tone is transmitted). The received digits are processed through the routing table until a match is found. If a match is found, the call is routed to the appropriate subscriber.

The factory default value MUST be false.

Signaling mode used for line seizure by the CPE.

Enumeration of:

• LoopStart
• GroundStart

The factory default value MUST be LoopStart.

Indicates the status of this physical interface.

Enumeration of:

• Up
• Error
• Testing
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Indicates the support for pass-through of fax data of this interface. Enumeration of:

• Disable (Prevents the CPE from switching to a fax pass-through mode)
• Auto (Allows the CPE to automatically detect fax data to determine whether or not to switch to a fax pass-through mode)
• Force (Forces the CPE to switch to a fax pass-through mode regardless of whether fax signaling is detected)

Indicates the support for pass-through of modem data of this interface. Enumeration of:

• Disable (Prevents the CPE from switching to a modem pass-through mode)
• Auto (Allows the CPE to automatically detect modem data to determine whether or not to switch to a modem pass-through mode)
• Force (Forces the CPE to switch to a modem pass-through mode regardless of whether modem signaling is detected)

Dial type used on the line.

Enumeration of:

• Tone (Set the dial type to Tone dialling)
• Pulse (Set the dial type to Pulse dialling)

Defines the terminal type plugged on this interface to determine the correct signaling to be used to contact the terminal.

Enumeration of:

• Audio
• Fax
• Modem
• Any

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

The event for which the ring pattern is to apply. Enumeration of:

• Default
• CCBSCallBack
• CCNRCallBack
• InternalCall
• RingSplash
• Group (Used when the FXS is being alerted as part of a call to an CallControl.Group.{i})

The parameter MAY instead indicate a vendor-specific event name, which MUST use the format defined in [TR-106].

Comma-separated list (up to 10 items) of unsigned integers. The values represent an alternating pattern of times (in milliseconds) when the ringer is ON or OFF.

Example: “1000,5000”

See also [ETSI_TR_101_183].

Indicates the status of this base.

Enumeration of:

• Up
• Error
• Testing
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

The highest DECT protocol version supported by the base.

Enumeration of:

• GAP (see [ETSI_EN_300_444])
• CAT-iq 1.0 (see [ETSI_TS_102_527-1])
• CAT-iq 2.0 (see [ETSI_TS_102_527-3])
• CAT-iq 2.1 (see [ETSI_TS_102_527-5])
• CAT-iq 3.0 (see [ETSI_TS_102_527-4])
• CAT-iq 4.0

The PIN is an hexbinary string of 32 bits, as defined in [ETSI_TS_102_527-3].

When read, this parameter returns an empty string, regardless of the actual value.

Enables the subscription mode of the DECT base. If true, the subscription window is open, otherwise it is closed. When the subscription window is open, a DECT portable part can be subscribed / registered to the DECT base. When written as true, it forces the device to open the subscription window. When the subscription window timeslot expires, the value MUST be changed back to false.

If the CPE user can open the subscription window with a specific command (i.e. via DECT base GUI or pushing a button), the parameter MUST report the correct status (true, while the window is opened).

Algorithm used in the encryption process defined in [ETSI_EN_300_175-7].

Enumeration of:

• DSC (DECT Standard Cipher)
• DSC2 (DECT Standard Cipher #2)
• CCM (CCM Authenticated Encryption Algorithm)

This parameter is used to control the sending RF power as per the required range within the customer premises.

When set to ‘Reduced’, the CPE SHALL undertake measures to reduce the transmission RF power.

Enumeration of:

• Normal
• Reduced

The count of all successful handovers.

Value Change Notification requests for this parameter MAY be denied.

The count of all failed handovers.

Value Change Notification requests for this parameter MAY be denied.

The count of all bad A-field packets.

Value Change Notification requests for this parameter MAY be denied.

The count of all bad B-field packets.

Value Change Notification requests for this parameter MAY be denied.

The count of all synchronization failures during all calls.

Value Change Notification requests for this parameter MAY be denied.

Indicates the status of this DECT portable.

Enumeration of:

• Up
• Error
• Testing
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Comma-separated list of strings. Each list item MUST be the Path Name of a row in the CodecProfile. table. If the referenced object is deleted, the corresponding item MUST be removed from the list.

The CPE SHOULD use the first enabled item in the list among those supported by the portable.

The current registration status of the DECT portable.

Enumeration of:

• In reach
• Not in reach

The International Portable User Identity which uniquely identifies the current user of the portable.

The IPUI is composed of the Portable User Type (PUT), of 4 bits, followed by the Portable User Number (PUN) whose size and format depend on PUT (see [Section 6.2/ETSI_EN_300_175-6]).

The hexbinary string is encoded exactly as it is defined in [Section 7.7.30/ETSI_EN_300_175-5]) :

• Bits from position 0 to 3 represent the PUT (as defined in [Section 7.3/ETSI_EN_300_175-6]).
• Bits from position 4 to IPUILength-1 represent the PUN.
• Unused bits after position IPUILength-1 are set to 0.

Examples :

• Type N (PUT + IPEI) :

• PUT = 0000 (4 bits) = 0 (hexadecimal)

• IPEI = 0000 0000 0000 1100 0000 0000 0000 1000 1001 (36 bits) = 00 0C 00 08 9 (hexadecimal)

• IPUILength = 4 + 36 = 40 (bits)

• IPUI = 00 00 C0 00 89 (40 bits; multiple of 8 so no bits are ignored)

• Type O (PUT + binary-coded number) :

• PUT = 0001 (4 bits) = 1 (hexadecimal)

• Number (decimal) = 4546812123

• Number (binary) = 1000 0111 1000 0001 0110 1100 0110 1101 1 (33 bits)

• Number (hexadecimal) = 87 81 6C 6D 8 (33 bits; last three bits are ignored)

• IPUILength = 4 + 33 = 37 (bits)

• IPUI = 18 78 16 C6 D8 (37 bits; last 3 bits are ignored)

• Type Q (PUT + BCD number) :

• PUT = 0011 (4 bits) = 3 (hexadecimal)

• Number (decimal) = 4546812123

• Number (BCD) = 0100 0101 0100 0110 1000 0001 0010 0001 0010 0011 (40 bits)

• IPUILength = 4 + 40 = 44 (bits)

• IPUI = 34 54 68 12 12 30 (40 bits; last 4 bits are ignored)

The International Portable Equipment Identity which is globally unique and identifies the portable.

The IPEI is composed of the Equipment Manufacturer’s Code (EMC), of 16 bits, followed by the Portable equipment Serial Number (PSN) of 20 bits (see [Section 10/ETSI_EN_300_175-6]).

The hexbinary string is encoded as follows :

• Bits from position 0 to 15 represent the EMC.
• Bits from position 16 to 35 represent the PSN.
• The last four bits are unused and are set to 0.

The Portable Access Rights Key of this portable.

The PARK is composed of the Access Rights Class (ARC) of 3 bits and the Access Rights Details (ARD) whose size and format depend on the ARC (see [Sections 6.1.1 to 6.1.5/ETSI_EN_300_175-6]).

The hexbinary string is encoded as follows :

• Bits from position 0 to 2 represent the ARC (as defined in [Section 7.2/ETSI_EN_300_175-6]).

• For class A :

  • Bits from position 3 to 35 represent the ARD.
  • The last four bits are unused and are set to 0.

• For other classes :

  • Bits from position 3 to 31 represent the ARD.

Comma-separated list of strings. Protocols used for connection.

Each list item is an enumeration of:

• GAP
• CAT-iq 1.0
• CAT-iq 2.0
• CAT-iq 2.1
• CAT-iq 3.0
• CAT-iq 4.0

The date and time in which the DECT portable has been subscribed with the base.

If NTP or equivalent is not available, this parameter, if present, SHOULD be set to the Unknown Time value.

This parameter MAY be used by the ACS to control the registration status of the portable.

Enumeration of:

• Unregister (the CPE unregisters the portable from the base, but retains the instance in the list. This is a temporary detachment procedure)
• Disable (the CPE unregisters the portable from the base and removes the instance from the list of registered portables. It is possible for the portable to register again in the future)

Indicates the status of this client. Unless noted otherwise, the status values apply to both registering and non-registering clients.

Enumeration of:

• Up (The client is operational and has established connectivity with the network; i.e. the client is currently registered (for clients that register) or the periodic ping test indicates network connectivity (for clients that don’t register))
• Initializing (Transitional state where the client has been enabled and is waiting an external event to transition to the next state (i.e. IP connectivity, DNS resolution…))
• Registering (The client is in the process of registering with the network. This state applies only to clients that register)
• Deregistering (The client is in the process of deregistering over the network. This state applies only to clients that register)
• Error_Misconfigured (The client is enabled, but is non-operational due a configuration error)
• Error_Network (A network error occurred)
• Error_Registration (An error occurred during registration. This state applies only to clients that register)
• Quiescent (This state indicates that the client has been disabled and is waiting for active session(s) to terminate before transitioning to the disabled state)
• Disabled (The client is disabled)

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Mechanism via which this instance was assigned. Enumeration of:

• AutoConfigured (Automatically generated, for example by a ESBC that auto-creates client objects)
• Static (For example, present in the factory default configuration, created by the ACS, or created by some other management entity (e.g. via a GUI))

The registration procedures to apply. For RegisterMode values other than STATIC, the SIP SIP conveys its RegisterURI-to-ContactURI binding to the network using the SIP registration procedure. For the RegisterMode value of STATIC, the SIP client RegisterURI-to-ContactURI binding is conveyed to the network via some out-of-band mechanism not defined by this data model.

This parameter can only be modified if Origin is Static.

Enumeration of:

• RFC3261 (The client registers with the network using the registration procedures defined in [RFC3261])
• STATIC (The client does not register with the network)
• RFC6140 (The client registers with the network using the registration procedures defined in [RFC6140])
• TISPAN (The client registers with the network using the registration procedures defined in [Section 5.1.1.2/3GPP_TS_24.229])

Username used to authenticate the connection to the server.

This parameter can only be modified if Origin is Static.

Password used to authenticate the connection to the server.

This parameter can only be modified if Origin is Static.

When read, this parameter returns an empty string, regardless of the actual value.

SIP network with which this SIP client is associated.

The value MUST be the Path Name of a row in the SIP.Network. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

This parameter can only be modified if Origin is Static.

Limit on the number of simultaneous voice sessions across this client. This MUST be less than or equal to Capabilities.MaxSessionCount.

A value of zero indicates no explicit limit on the number of sessions.

The SIP URI that represents the identity of this SIP client. For RegisterMode values where the SIP client registers with the network, this SIP URI is placed in the From and To headers in the REGISTER request.

This parameter can only be modified if Origin is Static.

Indicates the status of this Contact.

Enumeration of:

• Up
• Error
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Mechanism via which this Contact was assigned. Enumeration of:

• AutoConfigured (Automatically generated, for example by a ESBC that auto-creates Contact objects)
• Static (For example, present in the factory default configuration, created by the ACS, or created by some other management entity (e.g. via a GUI))

[IPAddress] This is the IP address where the Client is listening for SIP requests from the service provider network. This IP address value is populated in the host portion of the ContactURI parameter.

This parameter can only be modified if Origin is Static.

This is the port where the Client is listening for SIP requests from the service provider network. This IP port value is populated in the port portion of the ContactURI parameter.

This parameter can only be modified if Origin is Static.

The current Contact URI of the Client.

If SIP registration procedures are being used, as determined by the RegisterMode parameter, then this parameter is populated in the Contact header field of the REGISTER request.

This parameter can only be modified if Origin is Static.

Time when this registration will expire. This parameter is valid only when SIP registration procedures are being used, as determined by the RegisterMode parameter.

If this registration never expires, this parameter SHOULD be set to the Unknown Time value.

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

SIP event name corresponding to the value given in SIP.Network.{i}.EventSubscribe.{i}..

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

Password used to authenticate the connection to the event notify server.

When read, this parameter returns an empty string, regardless of the actual value.

Indicates the status of this network.

Enumeration of:

• Up
• Resolving
• Error_DNS
• Error_Other
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Host name or IP address of the SIP proxy server.

If not an empty string, all SIP signaling traffic MUST be sent to the host indicated by this parameter and the port indicated by ProxyServerPort unless OutboundProxy is not an empty string or a different route was discovered during normal SIP routing operations.

Regardless of which host the traffic gets sent to (ProxyServer or OutboundProxy), the value of this parameter (unless an empty string) MUST be used to derive the URI placed into the SIP Route header field of all requests originated by this end-point, unless a different proxy host was discovered dynamically during normal SIP routing operations.

Transport protocol to be used in connecting to the SIP proxy server.

Enumeration of:

• UDP
• TCP
• TLS
• SCTP

Host name or IP address of the SIP registrar server.

If this parameter is an empty string, the CPE MUST obtain all of the registrar server configuration information, including host name or IP address, port, and transport protocol, from the values in ProxyServer, ProxyServerPort, and ProxyServerTransport.

Destination port to be used in connecting to the SIP registrar server.

If RegistrarServer is empty the CPE MUST obtain all of the registrar server configuration information, including host name or IP address, port, and transport protocol, from the values in ProxyServer, ProxyServerPort, and ProxyServerTransport.

Transport protocol to be used in connecting to the registrar server. Enumeration of:

• UDP
• TCP
• TLS
• SCTP

If RegistrarServer is empty the CPE MUST obtain all of the registrar server configuration information, including host name or IP address, port, and transport protocol, from the values in ProxyServer, ProxyServerPort, and ProxyServerTransport.

If non-empty this ServerDomain is used by the devices in a DNS SRV request to provide FQDNs FQDNServer.{i}. for SIP Server connections.

[RFC2782] Clients ask for a specific service/protocol for a specific domain (the word domain is used here in the strict RFC 1034 sense), and get back the names of any available servers.

Transport protocol to be used for incoming call control signaling.

Enumeration of:

• UDP
• TCP
• TLS
• SCTP

The Fully Qualified Domain Name (FQDN) or IP Address of the outbound proxy. If the value is not an empty string, the SIP endpoint MUST send all SIP traffic (requests and responses) to the host indicated by this parameter and the port indicated by OutboundProxyPort. This MUST be done regardless of the routes discovered using normal SIP operations, including use of Route headers initialized from Service-Route and Record-Route headers previously received. OutboundProxy is NOT used to generate the URI placed into the Route header of any requests.

When OutboundProxy is assigned, the name is looked up (resolved) and the corresponding address is set in OutboundProxyResolvedAddress.

[IPAddress] The IP address of the outbound proxy.

This parameter can be assigned statically (e.g. present in the factory default configuration or set by the ACS via OutboundProxy) or assigned dynamically (via DHCP).

When OutboundProxy is assigned, the name is looked up (resolved) and the corresponding address is set in OutboundProxyResolvedAddress.

Indicates whether it is the static configuration or the DHCP configuration that is actually used for OutboundProxyResolvedAddress.

Enumeration of:

• Static
• DHCP

Applicable inbound authentication method, if any.

Enumeration of:

• None
• Digest (when selected, InboundAuthUsername and InboundAuthPassword MUST be specified)
• SourceFilter (only accept incoming SIP requests from IP addresses associated with ProxyServer)

If inbound authentication is used, the password credentials.

When read, this parameter returns an empty string, regardless of the actual value.

When true, in the SDP included in an OK response to an Invite, the first listed codec MUST be the highest priority codec among those offered in the Invite, based on the priorities specified in CodecList. The list of codecs in the SDP MAY also include other lower priority codecs.

When false, there is no specific requirement for choosing the codecs listed in the SDP included in an OK response.

VLAN ID (as defined in [802.1Q-2005]) to be used for outgoing SIP signaling packets for this network. A value of -1 indicates the default value is to be used.

If either VLANIDMark or EthernetPriorityMark are greater than zero, then the outgoing frames MUST be tagged. Otherwise, the outgoing frames MAY be tagged or untagged.

Ethernet priority code (as defined in [802.1Q-2005]) to be used for outgoing SIP signaling packets for this network. A value of -1 indicates the default value is to be used.

If either VLANIDMark or EthernetPriorityMark are greater than zero, then the outgoing frames MUST be tagged. Otherwise, the outgoing frames MAY be tagged or untagged.

In case of no response to a REGISTER request, the CPE shall retry according to retransmission algorithm defined in [RFC3261], then wait for expiration of this timer (in seconds).

In case of other response, the CPE shall wait for expiration of this timer before sending a new REGISTER request.

When starting a MWI subscription, on response of a SUBSCRIBE request

in case of no response or other response than 200 or 423, the CPE shall retry according to retransmission algorithm defined in [RFC3261], then wait for expiration of this timer (in seconds) before sending a new SUBSCRIBE request.

VoIP profile to use with this Network.

The value MUST be the Path Name of a row in the VoIPProfile. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

Comma-separated list of strings. Each list item MUST be the Path Name of a row in the CodecProfile. table. If the referenced object is deleted, the corresponding item MUST be removed from the list.

The CPE SHOULD use the first enabled item in the list among those supported by the remote endpoint and consistent with the available bandwidth.

Limit on the number of simultaneous voice sessions across all SIP.Client referencing this Network. This MUST be less than or equal to Capabilities.MaxSessionCount.

A value of zero indicates no explicit limit on the number of sessions.

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Mechanism via which the FQDN server was assigned.

Enumeration of:

• AutoConfigured (Automatically generated, for example by a CPE that utilizes DNS SRV record requests)
• Static (For example, present in the factory default configuration, created by the ACS, or created by some other management entity (e.g. via a GUI))

The domain name of the target host. This parameter can only be modified if Origin is Static.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

A server selection mechanism. The weight field specifies a relative weight for entries with the same priority.

Larger weights SHOULD be given a proportionately higher probability of being selected. This parameter can only be modified if Origin is Static.

The priority of this target host. A client MUST attempt to contact the target host with the lowest-numbered priority it can reach;

target hosts with the same priority SHOULD be tried in an order defined by the weight field. This parameter can only be modified if Origin is Static.

[IPAddress] Comma-separated list of IP Addresses, the IP Addresses that the FQDN resolves to.

The order in which the addresses appear in the list MAY imply priority. This parameter MAY be modified by the ACS only if Origin is Static.

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Transport protocol to be used in connecting to the event notifier.

Enumeration of:

• UDP
• TCP
• TLS
• SCTP

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

The SIP response code number.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

The message to be provided on the screen or display of the VoIP device when the SIP response is received.

If this parameter is not an empty string, display of this text preempts the value of Tone.Description.{i}.ToneText associated with Tone. If this parameter is an empty string, the value of Tone.Description.{i}.ToneText associated with Tone, if any, is displayed instead.

This parameter is applicable only for VoIP devices capable of text display.

The tone to be played to the user when the SIP response is received.

The value MUST be the Path Name of a row in the Tone.Description. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

An empty string indicates no tone is to be played for this event.

Indicates the status of this proxy.

Enumeration of:

• Up
• Error
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Mechanism via which the IP address was assigned. Enumeration of:

• AutoConfigured (Automatically generated, for example by a ESBC that auto-creates Proxy objects)
• Static (For example, present in the factory default configuration, created by the ACS, or created by some other management entity (e.g. via a GUI))

[IPAddress] The IP address the proxy listens on.

This parameter can only be modified if Origin is Static.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that (together with ProxyPort) doesn’t conflict with any existing entries.

The port the proxy listens on.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that (together with ProxyIPAddress) doesn’t conflict with any existing entries.

VoIP profile to use with this proxy.

The value MUST be the Path Name of a row in the VoIPProfile. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

Indicates the status of this registrar.

Enumeration of:

• Up
• Error
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Mechanism via which the IP address was assigned. Enumeration of:

• AutoConfigured (Automatically generated, for example by a ESBC that auto-creates Registrar objects)
• Static (For example, present in the factory default configuration, created by the ACS, or created by some other management entity (e.g. via a GUI))

[IPAddress] The IP address the registrar listens on for incoming SIP requests from an externally connected SIP user agent.

This parameter can only be modified if Origin is Static.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that (together with RegistrarPort) doesn’t conflict with any existing entries.

The port the registrar listens on.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that (together with RegistrarIPAddress) doesn’t conflict with any existing entries.

VoIP profile to use with this registrar.

The value MUST be the Path Name of a row in the VoIPProfile. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

Enables or disables this account, or places it into a quiescent state. Enumeration of:

• Enable
• Quiescent (OPTIONAL)
• Disable

In the Quiescent state, in-progress sessions remain intact, but no new sessions are allowed. If this parameter is set to Quiescent in a CPE that does not support the Quiescent state, it MUST treat it the same as the Disable state (and indicate Disabled in Status).

Indicates the status of this account. Unless noted otherwise, the Status values apply to both registering and non-registering external SIP user agents.

Enumeration of:

• Up (The Account is operational and has established connectivity with the external SIP user agent; i.e. the external device is currently registered (for SIP user agents that register) or the periodic ping test indicates connectivity with the external device (for SIP user agents that don’t register)
• Initializing (Transitional state where the Account has been enabled and is waiting for an external event to transition to the next state (i.e. IP connectivity, DNS resolution, reception of SIP REGISTER request from external SIP user agent…))
• Registering (The external SIP user agent is in the process of registering with the CPE. This state applies only to SIP user agents that register)
• Deregistering (The external SIP user agent is in the process of deregistering with the CPE. This state applies only to SIP user agents that register)
• ErrorMisconfigured (The Account is enabled, but is non-operational due a configuration error)
• ErrorNetwork (A network error occurred)
• ErrorRegistration (An error occurred during registration. This state applies only to Accounts serving SIP user agents that register)
• Quiescent (This state indicates that the Account has been disabled and is waiting for active session(s) to terminate before transitioning to the disabled state)
• Disabled (The Account is disabled)

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Mechanism via which the Account was created. Enumeration of:

• AutoConfigured (Automatically generated, for example by a ESBC that auto-creates Account objects)
• Static (For example, present in the factory default configuration, created by the ACS, or created by some other management entity (e.g. via a GUI))

Indicates the call status for this account.

Enumeration of:

• Idle
• Dialing
• Delivered
• Connected
• Alerting
• Disconnected

Username used to authenticate the connection to the registrar server.

This parameter can only be modified if Origin is Static.

Password used to authenticate the connection to the registrar server.

This parameter can only be modified if Origin is Static.

When read, this parameter returns an empty string, regardless of the actual value.

The current registration status of the externally connected SIP user agent. This parameter is valid only for SIP user agents that support registration.

Enumeration of:

• Registered
• Unregistered

The URI (AoR) of the externally connected SIP user agent. For SIP user agents that register, this is the URI that is contained in the To header field of the incoming REGISTER request.

This parameter can only be modified if Origin is Static.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

The domain name used when the SIP user agent has registered itself.

This parameter can only be modified if Origin is Static.

Comma-separated list of strings. Each list item MUST be the Path Name of a row in the CodecProfile. table. If the referenced object is deleted, the corresponding item MUST be removed from the list.

The CPE SHOULD use the first enabled item in the list among those supported by the remote endpoint and consistent with the available bandwidth.

Voice profile to use with this Account.

The value MUST be the Path Name of a row in the VoIPProfile. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

Indicates the status of this entry.

Enumeration of:

• Up
• Error
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Mechanism via which the Contact was assigned. Enumeration of:

• AutoConfigured (Automatically generated, for example by a ESBC that auto-creates Contact objects)
• Static (For example, present in the factory default configuration, created by the ACS, or created by some other management entity (e.g. via a GUI))

[IPAddress] IP Address of the externally connected SIP user agent. This is the IP address contained in the ContactURI parameter.

This parameter can only be modified if Origin is Static.

The port of the externally connected SIP user agent. This is the port contained in the ContactURI parameter.

This parameter can only be modified if Origin is Static.

This is the SIP signaling address of the externally connected SIP user agent. If the SIP user agent registers, then ContactURI is the Contact URI contained in the Contact header field of the REGISTER request received from the SIP user agent. If the SIP user agent does not register, then the ContactURI is provisioned by the ACS.

This parameter can only be modified if Origin is Static.

Time when this registration will expire. This parameter is valid only for external SIP user agents that register.

If this registration never expires, this parameter SHOULD be set to the Unknown Time value.

Indicates the status of this client.

Enumeration of:

• Up (The client is operational and has established connectivity with the network)
• Initializing (Transitional state where the client has been enabled and is waiting an external event to transition to the next state (i.e. IP connectivity, DNS resolution…))
• Registering (The client is in the process of registering with the network)
• Deregistering (The client is in the process of deregistering over the network)
• Error_Misconfigured (The client is enabled, but is non-operational due a configuration error)
• Error_Network (A network error occurred)
• Error_Registration (An error occurred during registration)
• Quiescent (This state indicates that the client has been disabled and is waiting for active session(s) to terminate before transitioning to the disabled state)
• Disabled (The client is disabled)

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Register mode.

Enumeration of:

• Wildcard
• Individual

MGCP network with which this MGCP client is associated.

The value MUST be the Path Name of a row in the MGCP.Network. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

Limit on the number of simultaneous voice sessions across this Client. This MUST be less than or equal to Capabilities.MaxSessionCount.

A value of zero indicates no explicit limit on the number of sessions.

Indicates the status of this Network.

Enumeration of:

• Up
• Resolving
• Error_DNS
• Error_Other
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

VLAN ID (as defined in [802.1Q-2005]) to be used for outgoing MGCP signaling packets for this network. A value of -1 indicates the default value is to be used.

If either VLANIDMark or EthernetPriorityMark are greater than zero, then the outgoing frames MUST be tagged. Otherwise, the outgoing frames MAY be tagged or untagged.

Ethernet priority code (as defined in [802.1D-2004]) to be used for outgoing MGCP signaling packets for this network. A value of -1 indicates the default value is to be used.

If either VLANIDMark or EthernetPriorityMark are greater than zero, then the outgoing frames MUST be tagged. Otherwise, the outgoing frames MAY be tagged or untagged.

Limit on the number of simultaneous voice sessions across all MGCP.Client. referencing this Network. This MUST be less than or equal to Capabilities.MaxSessionCount.

A value of zero indicates no explicit limit on the number of sessions.

VoIP profile to use with this network.

The value MUST be the Path Name of a row in the VoIPProfile. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

Comma-separated list of strings. Each list item MUST be the Path Name of a row in the CodecProfile. table. If the referenced object is deleted, the corresponding item MUST be removed from the list.

The CPE SHOULD use the first enabled item in the list among those supported by the remote endpoint and consistent with the available bandwidth.

Indicates the status of this client.

Enumeration of:

• Up (The client is operational and has established connectivity with the network)
• Initializing (Transitional state where the client has been enabled and is waiting an external event to transition to the next state (i.e. IP connectivity, DNS resolution…))
• Registering (The client is in the process of registering with the network)
• Deregistering (The client is in the process of deregistering over the network)
• Error_Misconfigured (The client is enabled, but is non-operational due a configuration error)
• Error_Network (A network error occurred)
• Error_Registration (An error occurred during registration)
• Quiescent (This state indicates that the client has been disabled and is waiting for active session(s) to terminate before transitioning to the disabled state)
• Disabled (The client is disabled)

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Password to be used when H.235 is enabled.

When read, this parameter returns an empty string, regardless of the actual value.

H.323 network with which this H.323 client is associated.

The value MUST be the Path Name of a row in the H323.Network. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

Limit on the number of simultaneous voice sessions across this Client. This MUST be less than or equal to Capabilities.MaxSessionCount.

A value of zero indicates no explicit limit on the number of sessions.

Indicates the status of this network.

Enumeration of:

• Up
• Resolving
• Error_DNS
• Error_Other
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

VLAN ID (as defined in [802.1Q-2005]) to be used for outgoing H.323 signaling packets for this network. A value of -1 indicates the default value is to be used.

If either VLANIDMark or EthernetPriorityMark is greater than zero, then the outgoing frames MUST be tagged. Otherwise, the outgoing frames MAY be tagged or untagged.

Ethernet priority code (as defined in [802.1D-2004]) to be used for outgoing H.323 signaling packets for this network. A value of -1 indicates the default value is to be used.

If either VLANIDMark or EthernetPriorityMark is greater than zero, then the outgoing frames MUST be tagged. Otherwise, the outgoing frames MAY be tagged or untagged.

Limit on the number of simultaneous voice sessions across all H323.Client. referencing this Network. This MUST be less than or equal to Capabilities.MaxSessionCount.

A value of zero indicates no explicit limit on the number of sessions.

VoIP profile to use with this network.

The value MUST be the Path Name of a row in the VoIPProfile. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

Comma-separated list of strings. Each list item MUST be the Path Name of a row in the CodecProfile. table. If the referenced object is deleted, the corresponding item MUST be removed from the list.

The CPE SHOULD use the first enabled item in the list among those supported by the remote endpoint and consistent with the available bandwidth.

Indicates the status of this trunk.

Enumeration of:

• Up
• Initializing
• Registering
• Unregistering
• Error
• Testing
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Mechanism via which the Trunk was assigned. Enumeration of:

• AutoConfigured (Automatically generated, for example by a ESBC that auto-creates Trunk objects)
• Static (For example, present in the factory default configuration, created by the ACS, or created by some other management entity (e.g. via a GUI))

Comma-separated list of strings. Each range consists of a Start part consisting of 1 to n digits (string representation) followed by an OPTIONAL End part consisting of 1 to n digits prefixed by a “-” symbol.

Examples:

0123456789

0123456700-0123456720

Each time this value is changed, the table of Lines managed by the Trunk is automatically adapted and each value of the DDIRange MUST be represented in corresponding CallControl.Line.{i}.DirectoryNumber parameter.

If this trunk has a SIP.Client. provider and SIP.Client.{i}.E164Format is set to true, full E.164 numbers with country code (but without “+” prefix) MUST be used.

This parameter can only be modified if Origin is Static.

The CodecPriority option controls which end of an inbound call leg will have priority over the negotiation of codecs.

Enumeration of:

• Local
• Remote

SIP client or ISDN interface associated with the identities represented by this trunk.

The value MUST be the Path Name of a row in the SIP.Client., ISDN.BRI. or ISDN.PRI. tables. If the referenced object is deleted, the parameter value MUST be set to an empty string.

This parameter can only be modified if Origin is Static.

Maximum number of Line.{i}. in CallControl.

This value cannot be greater than Capabilities.MaxLineCount.

Maximum number of Extension.{i}. in CallControl.

This value cannot be greater than Capabilities.MaxExtensionCount.

Indicates the status of this line.

Enumeration of:

• Up
• Error
• Testing
• Quiescent
• Disabled

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

• The value MUST NOT be empty.
• The value MUST start with a letter.
• If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

Indicates the call status for this line.

Enumeration of:

• Idle
• Dialing
• Delivered
• Connected
• Alerting
• Disconnected

Mechanism via which the Line instance was created.

Enumeration of:

• Static (explicitly created by the ACS or some other management entity, e.g. via a GUI)
• DDIRange (created by the CPE according to the Trunk.{i}.DDIRange setting of the associated Trunk.{i}. in Provider)

Provider for the line. The value MUST be the path name of a row in one of the following tables:

The value MUST be the Path Name of a row in the SIP.Client., H323.Client., ISDN.BRI., ISDN.PRI., POTS.FXO. or Trunk. tables. If the referenced object is deleted, the parameter value MUST be set to an empty string.

Set of calling features to apply to this line.

The value MUST be the Path Name of a row in the CallingFeatures.Set. table. If the referenced object is deleted, the parameter value MUST be set to an empty string.

Cumulative call duration in seconds.

Value Change Notification requests for this parameter MAY be denied.

Cumulative call duration in seconds.

Value Change Notification requests for this parameter MAY be denied.