Broadband Forum

USP Device:2.14 Root Object definition

tr-181-2-14-0-usp.xml

DATA MODEL DEFINITION

License

Copyright (c) 2010-2020, Broadband Forum

The undersigned members have elected to grant the copyright to their contributed material used in this software:
    Copyright (c) 2017-2019 ARRIS Enterprises, LLC.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
  2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
  3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The above license is used as a license under copyright only. Please reference the Forum IPR Policy for patent licensing terms https://www.broadband-forum.org/ipr-policy.

Any moral rights which are necessary to exercise under the above license grant are also deemed granted under this license.

Data Types

The Parameters defined in this specification make use of a limited subset of the default SOAP data types [SOAP1.1]. These data types and the named data types used by this specification are described below.

Note: A Parameter that is defined to be one of the named data types is reported as such at the beginning of the Parameter’s description via a reference back to the associated data type definition (e.g. [MACAddress]). However, such parameters still indicate their SOAP data types.

Data Type Base Type Description
base64 -

Base64 encoded binary (no line-length limitation).

A minimum and maximum allowed length can be indicated using the form base64(Min:Max), where Min and Max are the minimum and maximum length in characters before Base64 encoding. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in base64(Max). Multiple comma-separate ranges can be specified, in which case the length MUST be in one of the ranges.

boolean - Boolean, where the allowed values are 0 or 1 (or equivalently, true or false).
dateTime - The subset of the ISO 8601 date-time format defined by the SOAP dateTime type [SOAP1.1].
decimal -

Decimal number, with optional sign and optional fractional part.

For some decimal types, a value range is given using the form decimal(Min:Max) or decimal(Min:Max step Step) where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1.0. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

hexBinary -

Hex encoded binary.

A minimum and maximum allowed length can be indicated using the form hexBinary(Min:Max), where Min and Max are the minimum and maximum length in characters before Hex Binary encoding. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in hexBinary(Max). Multiple comma-separated ranges can be specified, in which case the length MUST be in one of the ranges.

int -

Integer in the range -2147483648 to +2147483647, inclusive.

For some int types, a value range is given using the form int(Min:Max) or int(Min:Max step Step) where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

long -

Long integer in the range -9223372036854775808 to 9223372036854775807, inclusive.

For some long types, a value range is given using the form long(Min:Max) or long(Min:Max step Step), where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

string - For strings, a minimum and maximum allowed length can be indicated using the form string(Min:Max), where Min and Max are the minimum and maximum string length in characters. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in string(Max). Multiple comma-separated ranges can be specified, in which case the string length will be in one of the ranges.
unsignedInt -

Unsigned integer in the range 0 to 4294967295, inclusive.

For some unsignedInt types, a value range is given using the form unsignedInt(Min:Max) or unsigned(Min:Max step Step), where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

unsignedLong -

Unsigned long integer in the range 0 to 18446744073709551615, inclusive.

For some unsignedLong types, a value range is given using the form unsignedLong(Min:Max) or unsignedLong(Min:Max step Step), where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges.

Alias string(:64)

A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.
Dbm1000 int The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm.
IEEE_EUI64 string(:23)

The IEEE EUI 64-bit identifier as defined in [IEEE_EUI64]. The IEEE defined 64-bit extended unique identifier (EUI-64) is a concatenation of:

  • The 24-bit (OUI-24) or 36-bit (OUI-36) company_id value assigned by the IEEE Registration Authority (IEEE-RA), and
  • The extension identifier (40 bits for OUI-24 or 28 bits for OUI-36) assigned by the organization with that company_id assignment.

Possible patterns:

  • <Empty> (an empty string)
  • ([0-9A-Fa-f][0-9A-Fa-f]:){7}([0-9A-Fa-f][0-9A-Fa-f])
IPAddress string(:45)

IP address, i.e. IPv4 address (or IPv4 subnet mask) or IPv6 address.

All IPv4 addresses and subnet masks MUST be represented as strings in IPv4 dotted-decimal notation. Here are some examples of valid IPv4 address textual representations:

  • 216.52.29.100
  • 192.168.1.254

All IPv6 addresses MUST be represented using any of the 3 standard textual representations defined in [RFC4291] Sections 2.2.1, 2.2.2 and 2.2.3. Both lower-case and upper-case letters can be used, but use of lower-case letters is RECOMMENDED. Here are some examples of valid IPv6 address textual representations:

  • 1080:0:0:800:ba98:3210:11aa:12dd
  • 1080::800:ba98:3210:11aa:12dd
  • 0:0:0:0:0:0:13.1.68.3

IPv6 addresses MUST NOT include zone identifiers. Zone identifiers are discussed in [Section 6/RFC4007].

Unspecified or inapplicable addresses (or IPv4 subnet masks) MUST be represented as empty strings unless otherwise specified by the parameter definition.

IPPrefix string(:49)

IPv4 or IPv6 routing prefix in Classless Inter-Domain Routing (CIDR) notation [RFC4632]. This is specified as an IP address followed by an appended “/n” suffix, where n (the prefix size) is an integer in the range 0-32 (for IPv4) or 0-128 (for IPv6) that indicates the number of (leftmost) ‘1’ bits of the routing prefix.

  • IPv4 example: 192.168.1.0/24
  • IPv6 example: 2001:edff:fe6a:f76::/64

This notation can also represent individual addresses by specifying all bits.

  • IPv4 example: 192.168.1.1/32
  • IPv6 example: 2001:edff:fe6a:f76::1/128

If the IP address part is unspecified or inapplicable, it MUST be an empty string unless otherwise specified by the parameter definition. In this case the IP prefix will be of the form “/n”.

If the entire IP prefix is unspecified or inapplicable, it MUST be an empty string unless otherwise specified by the parameter definition.

IPv4Address IPAddress(:45)

IPv4 address (or subnet mask).

Can be any IPv4 address that is permitted by the IPAddress data type.

Possible patterns:

  • <Empty> (an empty string)
  • ((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])
IPv4Prefix IPPrefix(:49)

IPv4 address prefix.

Can be any IPv4 prefix that is permitted by the IPPrefix data type.

Possible patterns:

  • <Empty> (an empty string)
  • /(3[0-2]|[012]?[0-9])
  • ((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])/(3[0-2]|[012]?[0-9])
IPv6Address IPAddress(:45)

IPv6 address.

Can be any IPv6 address that is permitted by the IPAddress data type.

IPv6Prefix IPPrefix(:49)

IPv6 address prefix.

Can be any IPv6 prefix that is permitted by the IPPrefix data type.

IoTDeviceType string

Describes the type of Device that the object instance is representing. Enumeration of:

  • Alarm
  • AntiTheft
  • Bell
  • Clock
  • Door
  • Fan
  • GarageDoor
  • HVAC
  • Light
  • Lock
  • Meter
  • Motor
  • Oven
  • PowerStrip
  • Sensor
  • SensorStrip
  • Siren
  • Thermostat
IoTEnumControlType string

Describes the type of IoT Enum Controller that the object instance is representing. Enumeration of:

  • AlarmMode
  • DoorMode
  • FanMode
  • LockMode
  • OperatingMode
  • TemperatureMode
  • ThermostatMode
IoTEnumSensorType string

Describes the type of IoT Enum Sensor that the object instance is representing. Enumeration of:

  • AlarmState
  • DoorState
  • FanState
  • LockState
  • OperatingState
  • TemperatureState
  • ThermostatFanState
IoTLevelType string

Describes the type of IoT Level Controller or Sensor that the object instance is representing. Enumeration of:

  • Acceleration
  • Area
  • Battery
  • Brightness
  • Concentration
  • Conductivity
  • Distance
  • Energy
  • Flow
  • Humidity
  • Intensity
  • Luminance
  • Meter
  • Motion
  • Position
  • Power
  • Pressure
  • Radiation
  • Speed
  • Temperature
  • Volume (Amount of space that an object or substance occupies)
  • Weight
IoTUnitType string

Possible Unit types used for decimal values. Enumeration of:

  • - (Dimensionless quantity)
  • % (Percent)
  • deg (Decimal degrees)
  • degC (Celsius)
  • degF (Fahrenheit)
  • K (Kelvin [SI])
  • km (Kilometer [SI])
  • m (Meter [SI])
  • cm (Centimeter [SI])
  • mm (Millimeter [SI])
  • h (Hour)
  • min (Minute)
  • s (Second [SI])
  • ms (Millisecond)
  • sq-km (Square kilometer)
  • sq-m (Square meter)
  • sq-cm (Square cm)
  • cu-m (Cubic meter)
  • l (Liter [SI])
  • cl (Centiliter [SI])
  • ml (Milliliter [SI])
  • kg (Kilogram [SI])
  • g (Gram [SI])
  • mg (Milligram [SI])
  • Wh (Watt hour)
  • kWh (Kilowatt hour)
  • W (Watt [SI])
  • A (Ampere [SI])
  • Hz (Hertz [SI])
  • V (Volt [SI])
  • N (Newton [SI])
  • Pa (Pascal [SI])
  • C (Coulomb [SI])
  • F (Farad [SI])
  • ohm (Ohm [SI])
  • S (Siemens [SI])
  • Wb (Weber [SI])
  • T (Tesla [SI])
  • H (Henry [SI])
  • lm (Lumen [SI])
  • lx (Lux [SI])
  • mps (Meter per second)
  • cd (Candela [SI])
  • mol (Mole [SI])
  • UV (Ultraviolet index)
  • RGB (RGB color, encoded as integer value between 0 (usually represented as 0x000000) and 16777215 (usually represented as 0xFFFFFF), e.g. Blue would be 255 (usually represented as 0x0000FF))
  • ppm (Parts per million (Alternative use percent: 1ppm = 0.0001%))
  • Sv (Sievert (J/kg) [SI])
  • J (Joule [SI])
JSONObject string A JSON Object as defined in [Section 4/RFC7159].
MACAddress string(:17)

All MAC addresses are represented as strings of 12 hexadecimal digits (digits 0-9, letters A-F or a-f) displayed as six pairs of digits separated by colons. Unspecified or inapplicable MAC addresses MUST be represented as empty strings unless otherwise specified by the parameter definition.

Possible patterns:

  • <Empty> (an empty string)
  • ([0-9A-Fa-f][0-9A-Fa-f]:){5}([0-9A-Fa-f][0-9A-Fa-f])
PSDBreakPointIndexAndLevel unsignedInt[2:2]
  1. the Power Spectral Density (PSD) breakpoint sub-carrier index in the range [0:49152] with Df = 4.3125 kHz frequency spacing, and
  2. the value of the level of the PSD at this sub-carrier expressed in 0.1 dBm/Hz with an offset of -200 dBm/Hz. The range of valid values for PSD is -30 to -200 dBm/Hz. Both values are represented as unsignedInt.
PSMBreakPointIndexAndLevel unsignedInt[2:2]
  1. The PSM breakpoint sub-carrier index in the range [0:4095], and
  2. the value of the level of the PSM at this sub-carrier expressed in 0.1 dBm/Hz with an offset of -140 dBm/Hz. Both values are represented as unsignedInt. [Clause 5.2/G.9964] defines limits on PSM breakpoint levels.
SELTPAttenuationCharacteristicsIndexAndTFlog unsignedInt[2:2]
  1. The paired frequency spacing index in the range [0:8191], and
  2. The transfer function log value, i.e. [i, TFlog(i * TFlogGroupSize * Df)], where the reference frequency spacing Df = 4.3125 kHz, the index i valid range is 0 to 8191, and TFlog(i * TFlogGroupSize * Df) spans a range from +6.0 dB down to -96.2 dB with units of 0.1 dB. Both values are represented as unsignedInt.
SST string

Service Slice Type (SST). Enumeration of:

  • eMBB (5G Enhanced Mobile Broadband)
  • URLLC (Ultra-Reliable Low Latency Communications)
  • MIoT (Massive IoT)
  • V2X (Vehicle to Everything) See [Clause 5.15.2.2/3GPP-TS.23.501].
StatsCounter32 unsignedInt

A 32-bit statistics parameter, e.g. a byte counter.

This data type SHOULD NOT be used for statistics parameters whose values might become greater than the maximum value that can be represented as an unsignedInt (i.e. 0xffffffff, referred to below as maxval). StatsCounter64 SHOULD be used for such parameters.

The value maxval indicates that no data is available for this parameter. In the unlikely event that the actual value of the statistic is maxval, the CPE SHOULD return maxval - 1.

The actual value of the statistic might be greater than maxval. Such values SHOULD wrap around through zero.

The term packet is to be interpreted as the transmission unit appropriate to the protocol layer in question, e.g. an IP packet or an Ethernet frame.

StatsCounter64 unsignedLong

A 64-bit statistics parameter, e.g. a byte counter.

This data type SHOULD be used for all statistics parameters whose values might become greater than the maximum value that can be represented as an unsignedInt.

The maximum value that can be represented as an unsignedLong (i.e. 0xffffffffffffffff) indicates that no data is available for this parameter.

The term packet is to be interpreted as the transmission unit appropriate to the protocol layer in question, e.g. an IP packet or an Ethernet frame.

UERComplex int[2:2] Pair of 32-bit signed integers a(i),b(i) with each pair representing a complex component of the uncalibrated echo response (UER);
  1. Real UER component, a(i)
  2. Imaginary UER component, b(i) for values of i starting at i=0. Both values are represented as signed integers. The interpretation of the UER value is as defined in [Clause A.2.2.1/G.996.2].
URI string(:2048) Uniform Resource Identifier. See [RFC3986].
URL URI(:2048) Uniform Resource Locator. See [RFC3986] (URI), [IANA-uri-schemes], and individual URI scheme RFCs such as [RFC7252] (coap, coaps) and [RFC7230] (http, https).
UUID string(36)

Universally Unique Identifier. See [RFC4122].

Possible patterns:

  • [A-Fa-f0-9]{8}-[A-Fa-f0-9]{4}-[A-Fa-f0-9]{4}-[A-Fa-f0-9]{4}-[A-Fa-f0-9]{12}
ZigBeeNetworkAddress string(:4)

The ZigBee 16-bit network address (NWK) as defined in [ZigBee2007]. The address is assigned to a device by the network layer and used by the network layer for routing messages between devices.

Possible patterns:

  • <Empty> (an empty string)
  • ([0-9A-Fa-f]){4}

References

[3GPP-HSPA] High Speed Packet data Access (HSPA), 3GPP.
[3GPP-TS.23.003] 3GPP TS 23.003, Numbering, addressing and identification, 3GPP CT WG4.
[3GPP-TS.23.501] 3GPP TS 23.501, System architecture for the 5G System (5GS); Stage 2, 3GPP SA WG2.
[3GPP-TS.24.008] 3GPP TS 24.008, Mobile radio interface Layer 3 specification; Core network protocols; Stage 3, 3GPP CT WG1.
[3GPP-TS.24.301] 3GPP TS 24.301, Non-Access-Stratum (NAS) protocol for Evolved Packet System (EPS); Stage 3, 3GPP CT WG1.
[3GPP-TS.24.501] 3GPP TS 24.501, Non-Access-Stratum (NAS) protocol for 5G System (5GS); Stage 3, 3GPP CT WG1.
[3GPP-TS.24.526] 3GPP TS 24.526, User Equipment (UE) policies for 5G System (5GS); Stage 3, 3GPP CT WG1.
[3GPP-TS.25.171] 3GPP TS 25.171, Requirements for support of Assisted Global Positioning System (A-GPS), 3GPP RAN WG4.
[802.11-2007] IEEE Std 802.11-2007, Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications, IEEE, 2007.
[802.11-2012] IEEE Std 802.11-2012, Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications, IEEE, March 2012.
[802.11-2016] IEEE Std 802.11-2016, Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications, IEEE, December 2016.
[802.11a-1999] IEEE Std 802.11a-1999, High-speed Physical Layer in the 5 GHz band, IEEE, 1999.
[802.11ac-2013] IEEE Std 802.11ac-2013, Enhancements for Very High Throughput for Operation in Bands below 6 GHz, IEEE, December 2013.
[802.11ax] IEEE Std 802.11ax, Enhancements for High Efficiency WLAN, IEEE, May 2021.
[802.11b-1999] IEEE Std 802.11b-1999, Higher Speed Physical Layer Extension in the 2.4 GHz band, IEEE, 1999.
[802.11g-2003] IEEE Std 802.11g-2003, Further Higher Data Rate Extension in the 2.4 GHz Band, IEEE, 2003.
[802.11h-2003] IEEE Std 802.11h-2003, Spectrum and Transmit Power Management Extensions, IEEE, 2003.
[802.11n-2009] IEEE Std 802.11n-2009, Amendment 5: Enhancements for Higher Throughput, IEEE, 2009.
[802.1AB-2009] IEEE Std 802.1AB-2009, Station and Media Access Control Connectivity Discovery, IEEE, 2009.
[802.1ad-2005] IEEE Std 802.1ad-2005, Virtual Bridged Local Area Networks Amendment 4: Provider Bridges, IEEE, May 2005.
[802.1AX-2014] IEEE Std 802.1AX-2014, IEEE Standard for Local and metropolitan area networks - Link Aggregation, IEEE, 2014.
[802.1D-2004] IEEE Std 802.1D-2004, Media Access Control (MAC) Bridges, IEEE, 2004.
[802.1Q-2005] IEEE Std 802.1Q-2005, Virtual Bridged Local Area Networks, IEEE, 2006.
[802.1Q-2011] IEEE Std 802.1Q-2011, MAC Bridges and Virtual Bridge Local Area Networks, IEEE, 2011.
[802.1x-2004] IEEE Std 802.1x-2004, Standards for Local and Metropolitan Area Networks: Port based Network Access Control, IEEE, 2004.
[802.3-2012_section6] IEEE 802.3-2012 - Section Six, IEEE Standard for Ethernet - Section Six, IEEE, December 2012.
[802.3-2015] IEEE Std 802.3-2015, IEEE Standard for Ethernet, IEEE, 2015.
[BLUE] Blue, A New Class of Active Queue Management Algorithms.
[BPF] BPF, Berkeley Packet Filter Syntax, FreeBSD.org, October 2016.
[DataElements-v1.0] Data Elements Specification, Data Elements Specification Version 1.0, January 2019.
[DLNA-NDIG] DLNA Networked Device Interoperability Guidelines, DLNA Networked Device Interoperability Guidelines, Volume 2: Media Format Profiles., DLNA, October 2006.
[DNS-SD] RFC 6763, DNS-Based Service Discovery, IETF, 2013.
[DSLite] RFC 6333, Dual-Stack Lite Broadband Deployments Following IPv4 Exhaustion, IETF, 2011.
[DSLite-options] RFC 6334, Dynamic Host Configuation Protocol for IPv6 (DHCPv6) Option for Dual-Stack Lite, IETF, 2011.
[ETSIBRAN] ETSI EN 301 893, Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the RTTE Directive, ETSI.
[G.9701] G.9701, Fast access to subscriber terminals (G.fast)- Physical layer specification, ITU-T, 2014.
[G.988] G.988, ONU management and control interface (OMCI) specification, ITU-T, 2010.
[G.993.1] G.993.1, Very high speed digital subscriber line transceivers, ITU-T.
[G.993.2] G.993.2, Very high speed digital subscriber line transceivers 2 (VDSL2), ITU-T.
[G.9954] G.9954, Phoneline networking transceivers - Enhanced physical, media access, and link layer specifications (HPNA 3.0 and 3.1), ITU-T, 2007.
[G.996.2] G.996.2, Single-ended line testing for digital subscriber lines (DSL), ITU-T.
[G.9960] G.9960, Unified high-speed wire-line based home networking transceivers - System architecture and physical layer specification, ITU-T.
[G.9961] G.9961, Unified high-speed wire-line based home networking transceivers - Data link layer specification, ITU-T.
[G.9962] G.9962, Unified high-speed wire-line based home networking transceivers - Management specification, ITU-T.
[G.9964] G.9964, Unified high-speed wire-line based home networking transceivers - Power spectral density specification, ITU-T.
[G.997.1] G.997.1, Physical layer management for digital subscriber line (DSL) transceivers, ITU-T.
[G.997.2] G.997.2, Physical layer management for FAST transceivers, ITU-T, 2015.
[G.9973] G.9973, Protocol for identifying home network topology, ITU-T, 2011.
[G.998.1] G.998.1, ATM-based Multi-Pair Bonding, ITU-T, 2005.
[G.998.2] G.998.2, Ethernet-based Multi-Pair Bonding, ITU-T, 2005.
[G.998.3] G.998.3, Multi-Pair Bonding Using Time-Division Inverse Multiplexing, ITU-T, 2005.
[HPAV1.1] HomePlug™ AV Specification, Version 1.1, HomePlug Alliance, 2007.
[HTML4.01] HTML 4.01 Specification, W3C.
[IANA-protocolnumbers] IANA Protocol Numbers, Protocol Numbers, IANA.
[IANA-uri-schemes] IANA Uniform Resource Identifier (URI) Schemes Registry, Uniform Resource Identifier (URI) Schemes, IANA.
[IANAifType] IANAifType, IANAifType-MIB DEFINITIONS, IANA, 2009.
[ICSA-Baseline] ICSA Baseline Modular Firewall Certification Criteria, Baseline module - version 4.1, ICSA Labs, 2008.
[ICSA-Residential] ICSA Residential Modular Firewall Certification Criteria, Required Services Security Policy - Residential Category module - version 4.1, ICSA Labs, 2008.
[IEEE1905.1a] IEEE 1905.1a, IEEE Std 1905.1a, Convergent Digital Home Network for Heterogeneous Technologies Amendment 1: Support of new MAC/PHYs and enhancements, IEEE, December 2014., IEEE, December 2014.
[IEEE_EUI64] Guidelines for 64-bit Global Identifier (EUI-64) Registration Authority, Guidelines for 64-bit Global Identifier (EUI-64) Registration Authority, IEEE, March 1997.
[IKEv2-params] IKEv2 Parameters, Internet Key Exchange Version 2 (IKEv2) Parameters, IANA.
[IPDR-FTP] IPDR File Transfer Protocol, IPDR/File Transfer Protocol, TM Forum.
[IPDR-SP] IPDR Streaming Protocol, IPDR Streaming Protocol (IPDR/SP) Specification, TM Forum.
[IPDR-XDR] IPDR XDR Encoding Format, IPDR/XDR Encoding Format, TM Forum.
[IPDR-XML] IPDR XML File Encoding Format, IPDR/XML File Encoding Format, TM Forum.
[ISO3166-1] ISO 3166-1, Codes for the representation of names of countries and their subdivisions - Part 1: Country codes, ISO, 2006.
[ISO639-1] ISO 639-1, Codes for the representation of names of Languages - Part 1: Alpha-2 code, ISO, 2002.
[ISO646-1991] ISO/IEC 646-1991, Information Technology - ISO 7-bit coded character set for information interchange, ISO, 1991.
[ITU-E.118] ITU E.118, The international telecommunication charge card, International Telecommunication Union, May 2006.
[ITU-E.164] ITU E.164, The international public telecommunication numbering plan, International Telecommunication Union, October 2010.
[ITU-X.733] ITU X.733, Information technology - Open Systems Interconnection - Systems Management: Alarm reporting function, International Telecommunication Union, February 1992.
[JJ-300.00] JJ-300.00, Home-network Topology Identifying Protocol, TTC, 2011.
[JJ-300.01] JJ-300.01, The List of Device Categories, TTC, 2011.
[LIBPCAP] Libpcap, Libpcap File Format, Wireshark, 2015.
[LMAPIFM] RFC 8193, Information Model for Large-Scale Measurement Platforms (LMAPs), IETF, August 2017.
[LMAPREG] draft-ietf-ippm-metric-registry-12, Registry for Performance Metrics, IETF, June 30, 2017.
[MAPv1.0] Multi-AP Specification, Multi-AP Specification Version 1.0, June 2018.
[MOCA11-MIB] MOCA11-MIB, Remote Management of MoCA Interfaces using SNMP MIB, MoCA Alliance, 2009.
[MoCAv1.0] MoCA v1.0, MoCA MAC/PHY Specification v1.0, MoCA Alliance, 2009.
[MoCAv1.1] MoCA v1.1, MoCA MAC/PHY Specification v1.1 Extensions, MoCA Alliance, 2009.
[MQTT31] MQTT v3.1, MQ Telemetry Transport (MQTT) V3.1 Protocol Specification, 2010.
[MQTT311] MQTT Version 3.1.1, MQTT v3.1.1, OASIS Message Queuing Telemetry Transport (MQTT) TC, October 2014.
[MQTT50] MQTT Version 5.0, MQTT Version 5.0, Candidate OASIS Standard 02., OASIS Message Queuing Telemetry Transport (MQTT) TC, February 2019.
[OUI] Organizationally Unique Identifiers (OUIs).
[PCPProxy] RFC 7648, Port Control Protocol (PCP) Proxy Function, IETF, September 2015.
[RED] References on RED (Random Early Detection) Queue Management.
[RFC1035] RFC 1035, Domain Names - Implementation and Specification, IETF, 1987.
[RFC1323] RFC 1323, TCP Extensions for High Performance, IETF, May 1992.
[RFC1332] RFC 1332, The PPP Internet Protocol Control Protocol (IPCP), IETF, 1992.
[RFC1378] RFC 1378, The PPP AppleTalk Control Protocol (ATCP), IETF, 1992.
[RFC1552] RFC 1552, The PPP Internetwork Packet Exchange Control Protocol (IPXCP), IETF, 1993.
[RFC1661] RFC 1661, The Point-to-Point Protocol (PPP), IETF, 1994.
[RFC1877] RFC 1877, PPP Internet Protocol Control Protocol Extensions for Name Server Addresses, IETF, 1995.
[RFC1974] RFC 1974, PPP Stac LZS Compression Protocol, IETF, 1996.
[RFC2080] RFC 2080, RIPng for IPv6, IETF, 1997.
[RFC2097] RFC 2097, The PPP NetBIOS Frames Control Protocol (NBFCP), IETF, 1997.
[RFC2131] RFC 2131, Dynamic Host Configuration Protocol, IETF.
[RFC2132] RFC 2132, DHCP Options and BOOTP Vendor Extensions, IETF.
[RFC2225] RFC 2225, Classical IP and ARP over ATM, IETF.
[RFC2364] RFC 2364, PPP Over AAL5, IETF, 1998.
[RFC2474] RFC 2474, Definition of the Differentiated Services Field (DS Field) in the IPv4 and IPv6 Headers, IETF.
[RFC2581] RFC 2581, TCP Congestion Control, IETF, April 1999.
[RFC2582] RFC 2582, The NewReno Modification to TCP’s Fast Recovery Algorithm, IETF, April 1999.
[RFC2616] RFC 2616, Hypertext Transfer Protocol - HTTP/1.1, IETF, 1999.
[RFC2684] RFC 2684, Multiprotocol Encapsulation over ATM Adaptation Layer 5, IETF.
[RFC2697] RFC 2697, A Single Rate Three Color Marker, IETF.
[RFC2698] RFC 2698, A Two Rate Three Color Marker, IETF.
[RFC2782] RFC 2782, A DNS RR for specifying the location of services (DNS SRV), IETF, 2000.
[RFC2784] RFC 2784, Generic Routing Encapsulation (GRE), IETF, November 2000.
[RFC2818] RFC 2818, HTTP Over TLS, IETF, May 2000.
[RFC2819] RFC 2819, Remote Network Monitoring Management Information Base, IETF, 2000.
[RFC2863] RFC 2863, The Interfaces Group MIB, IETF, 2000.
[RFC2865] RFC 2865, Remote Authentication Dial In User Service (RADIUS), IETF, 2000.
[RFC2866] RFC 2866, RADIUS Accounting, IETF, 2000.
[RFC2869] RFC 2869, RADIUS Extensions, IETF, 2000.
[RFC2890] RFC 2890, Key and Sequence Number Extensions to GRE, IETF, November 2000.
[RFC2898] RFC 2898, PKCS #5: Password-Based Cryptography Specification Version 2.0, IETF.
[RFC3004] RFC 3004, The User Class Option for DHCP, IETF.
[RFC3066] RFC 3066, Tags for the Identification of Languages, IETF.
[RFC3174] RFC 3174, US Secure Hash Algorithm 1 (SHA1), IETF, September, 2001.
[RFC3232] RFC 3232, “Assigned Numbers: RFC 1700 is Replaced by an On-line Database”, IETF, 2002.
[RFC3315] RFC 3315, Dynamic Host Configuration Protocol for IPv6 (DHCPv6), IETF, 2003.
[RFC3339] RFC 3339, Date and Time on the Internet: Timestamps, IETF, July, 2002.
[RFC3596] RFC 3596, DDNS Extensions to Support IP Version 6, IETF, 2003.
[RFC3633] RFC 3633, IPv6 Prefix Options for Dynamic Host Configuration Protocol (DHCP) version 6, IETF, 2003.
[RFC3646] RFC 3646, DNS Configuration options for Dynamic Host Configuration Protocol for IPv6 (DHCPv6), IETF, 2003.
[RFC3775] RFC 3775, Mobility Support in IPv6, IETF, 2004.
[RFC3925] RFC 3925, Vendor-Identifying Vendor Options for Dynamic Host Configuration Protocol version 4 (DHCPv4), IETF.
[RFC3927] RFC 3927, Dynamic Configuration of IPv4 Link-Local Addresses, IETF, 2005.
[RFC3931] RFC 3931, Layer Two Tunneling Protocol - Version 3 (L2TPv3), IETF, March 2005.
[RFC3948] RFC 3948, UDP Encapsulation of IPsec ESP Packets, IETF, January 2005.
[RFC3986] RFC 3986, Uniform Resource Identifier (URI): Generic Syntax, IETF.
[RFC4007] RFC 4007, IPv6 Scoped Address Architecture, IETF.
[RFC4122] RFC 4122, A Universally Unique IDentifier (UUID) URN Namespace, IETF, 2005.
[RFC4180] RFC4180, Common Format and MIME Type for Comma-Separated Values (CSV) Files, IETF, October 2005.
[RFC4191] RFC 4191, Default Router Preferences and More-Specific Routes, IETF, 2005.
[RFC4193] RFC 4193, Unique Local IPv6 Unicast Addresses, IETF, 2005.
[RFC4242] RFC 4242, Information Refresh Time Option for Dynamic Host Configuration Protocol for IPv6 (DHCPv6), IETF, 2005.
[RFC4291] RFC 4291, IP Version 6 Addressing Architecture, IETF, 2006.
[RFC4292] RFC 4292, IP Forwarding Table MIB, IETF, 2006.
[RFC4293] RFC 4293, Management Information Base for the Internet Protocol (IP), IETF, 2006.
[RFC4301] RFC 4301, Security Architecture for the Internet Protocol, IETF, December 2005.
[RFC4302] RFC 4302, IP Authentication Header, IETF, December 2005.
[RFC4303] RFC 4303, IP Encapsulating Security Payload (ESP), IETF, December 2005.
[RFC4389] RFC 4389, Neighbor Discovery Proxies (ND Proxy), IETF, 2006.
[RFC4632] RFC 4632, Classless Inter-domain Routing (CIDR): The Internet Address Assignment and Aggregation Plan, IETF, 2006.
[RFC4719] RFC 4719, Transport of Ethernet Frames over Layer 2 Tunneling Protocol Version 3 (L2TPv3), IETF, November 2006.
[RFC4835] RFC 4835, Cryptographic Algorithm Implementation Requirements for Encapsulating Security Payload (ESP) and Authentication Header (AH), IETF, 2007.
[RFC4861] RFC 4861, Neighbor Discovery for IP version 6 (IPv6), IETF, 2007.
[RFC4862] RFC 4862, IPv6 Stateless Address Autoconfiguration, IETF, 2007.
[RFC5072] RFC 5072, IP Version 6 over PPP, IETF, 2007.
[RFC5139] RFC 5139, Revised Civic Location Format For Presence Information Data Format Location Object (PIDF-LO), IETF, February 2008.
[RFC5280] RFC 5280, Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile, IETF, May 2008.
[RFC5491] RFC 5491, GEOPRIV Presence Information Data Format Location Object (PIDF-LO) Usage Clarification, Considerations, and Recommendations, IETF, March 2009.
[RFC5625] RFC 5625, DNS Proxy Implementation Guidelines, IETF, 2009.
[RFC5969] RFC 5969, IPv6 Rapid Deployment on IPv4 Infrastructures (6rd) - Protocol Specification, IETF, 2010.
[RFC5996] RFC 5996, Internet Key Exchange Protocol Version 2 (IKEv2), IETF, September 2010.
[RFC6106] RFC 6106, IPv6 Router Advertisement Option for DNS Configuration, IETF, 2010.
[RFC6120] RFC 6120, Extensible Messaging and Presence Protocol (XMPP) : Core, IETF, 2011.
[RFC6234] RFC 6234, US Secure Hash Algorithms (SHA and SHA-based HMAC and HKDF), IETF, May, 2011.
[RFC6455] RFC 6455, The WebSocket Protocol, IETF, December 2011.
[RFC6762] RFC 6762, Multicast DNS, IETF, February 2013.
[RFC6838] RFC 6838, Media Type Specifications and Registration Procedures, IETF, January 2013.
[RFC6887] RFC 6887, Port Control Protocol (PCP), IETF, 2013.
[RFC6970] RFC 6970, Universal Plug and Play (UPnP) Internet Gateway Device (IGD) - Port Control Protocol (PCP) Interworking Function, IETF, 2013.
[RFC7159] RFC7159, The JavaScript Object Notation (JSON) Data Interchange Format, IETF, March 2014.
[RFC7230] RFC 7230, Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing, IETF, June 2014.
[RFC7252] RFC 7252, The Constrained Application Protocol (CoAP), IETF, June 2014.
[RFC7291] RFC 7291, DHCP Options for the Port Control Protocol (PCP), IETF, 2014.
[RFC7348] RFC 7348, Virtual eXtensible Local Area Network (VXLAN), IETF, August 2014.
[RFC7395] RFC 7395, An Extensible Messaging and Presence Protocol (XMPP) Subprotocol for WebSocket, IETF, October 2014.
[RFC7398] RFC 7398, A Reference Path and Measurement Points for Large-Scale Measurement of Broadband Performance, IETF, February 2015.
[RFC7468] RFC 7468, Textual Encoding of PKIX, PKCS, and CMS Structures, IETF, April 2015.
[RFC7594] RFC 7594, A Framework for Large-Scale Measurement of Broadband Performance (LMAP), IETF, September 2015.
[RFC7597] RFC 7597, Mapping of Address and Port with Encapsulation (MAP), IETF, July 2015.
[RFC7598] RFC 7598, DHCPv6 Options for configuration of Softwire Address and Port Mapped Clients, IETF, July 2015.
[RFC7599] RFC 7599, Mapping of Address and Port using Translation (MAP-T), IETF, July 2015.
[RFC793] RFC 793, Transmission Control Protocol, IETF, September 1981.
[RFC8141] RFC 8141, Uniform Resource Names (URNs), IETF, April 2017.
[RFC862] RFC 862, Echo Protocol, IETF, 1983.
[RFC959] RFC 959, File Transfer Protocol, IETF, 1985.
[SOAP1.1] Simple Object Access Protocol (SOAP) 1.1, W3C.
[STOMP1.2] STOMP Protocol Specification, STOMP Protocol Specification, Version 1.2.
[TR-064] TR-064 Corrigendum 1, LAN-Side DSL CPE Configuration Specification, Broadband Forum, August 2015.
[TR-069] TR-069 Amendment 6, CPE WAN Management Protocol, Broadband Forum, April 2018.
[TR-106] TR-106 Amendment 8, Data Model Template for CWMP Endpoints and USP Agents, Broadband Forum, May 2018.
[TR-124i5] TR-124 Issue 5, Functional Requirements for Broadband Residential Gateway Devices, Broadband Forum, July 2016.
[TR-124i6] TR-124 Issue 6, Functional Requirements for Broadband Residential Gateway Devices, Broadband Forum, July 2020.
[TR-143] TR-143 Amendment 1 Corrigendum 1, Enabling Network Throughput Performance Tests and Statistical Monitoring, Broadband Forum, August 2015.
[TR-159] TR-159, Management Framework for xDSL Bonding, Broadband Forum, December 2008.
[TR-181i2] TR-181 Issue 2 Amendment 15, Device Data Model, Broadband Forum, January 2022.
[TR-232] TR-232, Bulk Data Collection, Broadband Forum, May 2012.
[TR-262] TR-262, Femto Component Objects, Broadband Forum, November 2011.
[TR-304] TR-304, Broadband Access Service Attributes and Performance Metrics, Broadband Forum, February 2015.
[TR-369] TR-369 Issue 1 Amendment 2, User Services Platform, Broadband Forum, January 2022.
[TR-390] TR-390, Performance Measurement from Customer Equipment to IP Edge, Broadband Forum, May 2017.
[TR-471] TR-471, Maximum IP-Layer Capacity Metric, Related Metrics, and Measurements, Broadband Forum, December 2023.
[UPA-PLC] Universal Powerline Association, UPA.
[UPnP-DAv1] UPnP Device Architecture, UPnP Device Architecture 1.0, UPnP Forum, April 2008.
[UPnP-DAv11] UPnP Device Architecture 1.1, UPnP Device Architecture 1.1, UPnP Forum, October, 2008.
[UPnP-DM:1] UPnP Device Management:1, UPnP Device Management v1.
[UPnP-IGD:1] UPnP InternetGatewayDevice:1, InternetGatewayDevice:1 Device Template Version 1.01, UPnP, 2001.
[UPnP-IGD:2] UPnP InternetGatewayDevice:2, InternetGatewayDevice:2 Device Template Version 1.01, UPnP, 2010.
[USB1.0] USB 1.0, USB 1.0 Specification, USB-IF, January 1996.
[USB2.0] USB 2.0, USB 2.0 Specification, USB-IF, April 2000.
[USB3.0] USB 3.0, USB 3.0 Specification, USB-IF, November 2008.
[WPS 2.0] WSC 2.0, Wi-Fi Simple Configuration Technical Specification Version 2.0.x, Wi-Fi Alliance.
[WPSv1.0] Wi-Fi Protected Setup Specification Version 1.0h, Wi-Fi Alliance, 2006.
[Z-Wave] Z-Wave, Z-Wave website.
[ZigBee] ZigBee, ZigBee Alliance website.
[ZigBee2007] ZigBee 2007 Specification, ZigBee 2007 Specification, ZigBee Alliance, October 2007.

Legend

Object definition.
Mount point definition.
Parameter definition.
Command or Event definition.
Command Input / Output Arguments container.
Command or Event Object Input / Output Argument definition.
Command or Event Parameter Input / Output Argument definition.

Device:2.14 Data Model

For a given implementation of this data model, the Agent MUST indicate support for the highest version number of any object or parameter that it supports. For example, even if the Agent supports only a single parameter that was introduced in version 1.4, then it will indicate support for version 1.4. The version number associated with each object and parameter is shown in the Version column.

Name Type Write Description Object Default Version
Device. object R The top-level object for a Device. - 2.0
RootDataModelVersion string(:32) R

Root data model version, e.g. 2.4. For a vendor-defined root data model, this is the standard Broadband Forum model on which the vendor-defined model is based.

Possible patterns:

  • 2\.\d+
- 2.4
InterfaceStackNumberOfEntries unsignedInt R The number of entries in the InterfaceStack table. - 2.0
ProxiedDeviceNumberOfEntries unsignedInt R The number of entries in the ProxiedDevice table. - 2.12
Reboot() command - Reboot the entity associated with the containing Device. - 2.12
Boot! event - Boot event indicating that the Device was rebooted. - 2.12
CommandKey string R The command_key supplied when requesting the boot, or an empty string if the boot was not requested via a USP operation. - 2.12
Cause string R

The cause of the boot.

Enumeration of:

  • LocalReboot (A Device Event that was the result of a reboot triggered locally on the Device (NOT as a result of a Reboot() Command))
  • RemoteReboot (A Device Event that was the result of a reboot triggered via the Reboot() Command)
  • LocalFactoryReset (A Device Event that was the result of a factory reset triggered locally on the Device (NOT as a result of a FactoryReset() Command))
  • RemoteFactoryReset (A Device Event that was the result of a factory reset triggered via the FactoryReset() Command)
- 2.12
FirmwareUpdated boolean R true if the firmware was updated as a result of the boot that caused this Event Notification; otherwise false. - 2.12
ParameterMap string R Boot parameters configured via the recipient Controller’s LocalAgent.Controller.{i}.BootParameter table. Formatted as a [JSONObject] A JSON Object as defined in [Section 4/RFC7159]. - 2.12
FactoryReset() command - Factory reset the entity associated with the containing Device. - 2.0
SelfTestDiagnostics() command - [ASYNC] This diagnostics test is vendor-specific and MAY include testing hardware, software, and/or firmware. - 2.12
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Complete
  • Error_Internal
  • Error_Other If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
Results string(:1024) R Results of self-test (vendor specific). - 2.0
PacketCaptureDiagnostics() command - [ASYNC] This diagnostic command is used to record packet capture data on a valid (layer 2 or above) interface in libpcap or pcapng format. - 2.13
⇒ Input. arguments - Input arguments. -
Interface string(:256) W The value MUST be the Path Name of a table row. A reference to a (layer 2 or above) interface object that will be the target of this packet capture diagnostic. - 2.13
Format string W

This indicates whether the network trace will be recorded in libpcap [LIBPCAP] or pcapng format, and is dependent on the underlying method of performing a network trace.

Enumeration of:

  • libpcap (The packet data is recorded in libpcap [LIBPCAP] format)
  • pcapng (The packet data is recorded in pcapng format)
- 2.13
Duration unsignedInt(1:) W The duration in seconds to copy packets to the file target. The diagnostic completes when either the Duration, PacketCount, or ByteCount conditions are met. - 2.13
PacketCount unsignedInt W The maximum number of packets to record to the file target. A value of zero (0) indicates no limit. The diagnostic completes when the Duration, ByteCount, or PacketCount conditions are met. - 2.13
ByteCount unsignedInt W The maximum number of bytes to record to the file target. A value of zero (0) indicates no limit. The diagnostic completes when Duration, PacketCount or ByteCount conditions are met. - 2.13
FileTarget string(:2048) W The [URL] specifying the destination file location. HTTP and HTTPS transports MUST be supported. Other transports MAY be supported. - 2.13
FilterExpression string(:256) W A ([BPF]) formatted expression used to restrict the types of network packets that are recorded to FileTarget. - 2.13
Username string(:256) W Username to be used by the Agent to authenticate with the file location. This string is set to an empty string if no authentication is required. - 2.13
Password string(:256) W

Password to be used by the Agent to authenticate with the file location. This string is set to an empty string if no authentication is required. When read, this parameter returns an empty string, regardless of the actual value.

When read, this parameter returns an empty string, regardless of the actual value.

- 2.13
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL)
  • Error_Internal
  • Error_Other If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
PacketCaptureResult.{i}. object(0:) R

Results for individual packet capture diagnostics. Packet capture files whose FileLocation is local to the system SHOULD be deleted when the next diagnostic is run, or upon a system reboot.

This table’s Instance Numbers MUST be 1, 2, 3… (assigned sequentially without gaps).

- 2.13
FileLocation string(:2048) R The [URL] specifying the resulting file location of the packet capture record that triggered this result. This MAY be different than the location specified in FileTarget. - 2.13
StartTime dateTime R The local system time at which the capture was started. - 2.13
EndTime dateTime R The local system time at which the capture was completed. - 2.13
Count unsignedInt R The number of packets recorded to the file target. - 2.13
ScheduleTimer() command - [ASYNC] Schedule an async timer operation. A scheduled timer MUST persist across reboots. NOTE: This command changed from synchronous to asynchronous in version 2.14. - 2.12
⇒ Input. arguments - Input arguments. -
DelaySeconds unsignedInt(1:) W [MANDATORY] The number of seconds from the time this command is invoked until the Agent responds with an OperationComplete Event notification (based on the associated subscriptions). - 2.12
IoTCapabilityNumberOfEntries unsignedInt R The number of entries in the IoTCapability table. - 2.13
NodeNumberOfEntries unsignedInt R The number of entries in the Node table. - 2.13
Device.Services. object R This object contains general services information. - 2.0
Device.DeviceInfo. object R This object contains general device information. - 2.12
DeviceCategory string[] R Comma-separated list of strings. Each list item is a device category (e.g. “AV_TV” and “AV_Recorder”), or the value is an empty string if no such element is provided by the device. Note: It is assumed that this list might be used for HTIP (Home-network Topology Identifying Protocol) [JJ-300.00] and [G.9973]. Standard HTIP device categories are defined in [JJ-300.01]. In this case, the maximum length of the list is 127 and of each item is 31, and any non-HTIP device categories SHOULD NOT conflict with standard HTIP device categories. - 2.8
Manufacturer string(:64) R The manufacturer of the CPE (human readable string). - 2.0
ManufacturerOUI string(6) R

Organizationally unique identifier of the device manufacturer. Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. Possible patterns:

  • [0-9A-F]{6} The value MUST be a valid OUI as defined in [OUI]. This value MUST remain fixed over the lifetime of the device, including across firmware updates.

Any change would indicate that it’s a new Agent and would therefore require a Boot! Event with a LocalFactoryReset enumerated value in the Boot!.Cause argument.

- 2.0
CID string(6) R

Company identifier assigned and registered by the IEEE Registration Authority to the entity responsible for this Agent. Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. Possible patterns:

  • [0-9A-F]{6} This value MUST remain fixed over the lifetime of the Agent, including across firmware updates. Any change would indicate that it’s a new Agent and would therefore require a Boot! Event with a LocalFactoryReset enumerated value in the Boot!.Cause argument.
- 2.12
ModelName string(:64) R

Model name of the CPE (human readable string).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ModelNumber string(:64) R The model number of the device (human readable string), or an empty string if no model number is provided by the device. Note: It is assumed that this string might be used for HTIP (Home-network Topology Identifying Protocol) [JJ-300.00] and [G.9973]. In this case, the maximum length of the string is 31. - 2.8
Description string(:256) R

A full description of the CPE device (human readable string).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ProductClass string(:64) R Identifier of the class of product for which the serial number applies. That is, for a given manufacturer, this parameter is used to identify the product or class of product over which the SerialNumber parameter is unique. This value MUST remain fixed over the lifetime of the device, including across firmware updates. - 2.0
SerialNumber string(:64) R Identifier of the particular device that is unique for the indicated class of product and manufacturer. This value MUST remain fixed over the lifetime of the device, including across firmware updates. - 2.0
HardwareVersion string(:64) R A string identifying the particular CPE model and version. - 2.0
SoftwareVersion string(:64) R A string identifying the software version currently installed in the CPE (i.e. version of the overall CPE firmware). To allow version comparisons, this element SHOULD be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 3.0.21 where the components mean: Major.Minor.Build. For CPEs that support multiple firmware images, the value for this parameter MUST be the software version of the active firmware image. - 2.0
ActiveFirmwareImage string R A full path reference to the row in the FirmwareImage table representing the currently running firmware image. - 2.12
BootFirmwareImage string W A full path reference to the row in the FirmwareImage table of the firmware image that is to be loaded the next time the device boots. This parameter value cannot be empty and must point to a valid and enabled FirmwareImage object where the (FirmwareImage.{i}.Available parameter is set to ‘true’). Out of the factory, this parameter should be set to point to the firmware image the CPE will attempt to boot when first powered on. The firmware image instance referenced by this parameter must also have an Available parameter value of ‘true’. Attempting to set this parameter to point to a non-enabled firmware image MUST result in the CPE responding with a CWMP fault (9007). In situations where the CPE cannot boot the firmware image specified by this parameter and manages to boot a different firmware image, the CPE MUST NOT modify this value to point to the alternate firmware image that is currently active. - 2.12
AdditionalHardwareVersion string[](:64) R Comma-separated list (maximum number of characters 64) of strings. Each entry is an additional version. Represents any additional hardware version information the vendor might wish to supply. - 2.0
AdditionalSoftwareVersion string[](:64) R Comma-separated list (maximum number of characters 64) of strings. Each entry is an additional version. Represents any additional software version information the vendor might wish to supply. - 2.0
ProvisioningCode string(:64) W Identifier of the primary service provider and other provisioning information, which MAY be used by the ACS to determine service provider-specific customization and provisioning parameters. - 2.0
UpTime unsignedInt R

Time in seconds since the CPE was last restarted.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
FirstUseDate dateTime R

Date and time in UTC that the CPE first both successfully established an IP-layer network connection and acquired an absolute time reference using NTP or equivalent over that network connection. The CPE MAY reset this date after a factory reset. If NTP or equivalent is not available, this parameter, if present, SHOULD be set to the Unknown Time value.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
FirmwareImageNumberOfEntries unsignedInt R The number of entries in the FirmwareImage table. - 2.12
VendorConfigFileNumberOfEntries unsignedInt R The number of entries in the VendorConfigFile table. - 2.0
ProcessorNumberOfEntries unsignedInt R The number of entries in the Processor table. - 2.1
VendorLogFileNumberOfEntries unsignedInt R The number of entries in the VendorLogFile table. - 2.1
LocationNumberOfEntries unsignedInt R The number of entries in the Location table. - 2.4
DeviceImageNumberOfEntries unsignedInt R The number of entries in the DeviceImageFile table. - 2.11
FriendlyName string(:32) W The friendly name of the device. In [TR-369] the friendly name is used during the advertisement of an endpoint - see section IANA-Registered USP Service Names of [TR-369]. - 2.12
PEN string(:10) R Private Enterprise Number assigned and registered by IANA to the entity responsible for this Agent. Represented as a decimal encoding of the IANA-assinged number. This value MUST remain fixed over the lifetime of the Agent, including across firmware updates. Any change would indicate that it’s a new Agent and would therefore require a Boot! Event with a LocalFactoryReset enumerated value in the Boot!.Cause argument. - 2.12
Device.DeviceInfo.VendorConfigFile.{i}. object(0:) R

Every instance of this object is a Vendor Configuration File, and contains parameters associated with the Vendor Configuration File. This table of Vendor Configuration Files is for information only and does not allow the Controller to operate on these files in any way. Whenever the CPE successfully downloads a configuration file as a result of the Download RPC with the FileType argument of 3 Vendor Configuration File, the CPE MUST update this table.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R Name of the vendor configuration file. If the CPE is able to obtain the name of the configuration file from the file itself, then the value of this parameter MUST be set to that name. Otherwise, if the CPE can extract the file name from the URL used to download the configuration file, then the value of this parameter MUST be set to that name. Otherwise, the value of this parameter MUST be set to the value of the TargetFileName argument of the Download RPC used to download this configuration file. - 2.0
Version string(:16) R A string identifying the configuration file version currently used in the CPE. If the CPE is able to obtain the version of the configuration file from the file itself, then the value of this parameter MUST be set to the obtained value. Otherwise, the value of this parameter MUST be an empty string. - 2.0
Date dateTime R Date and time when the content of the current version of this vendor configuration file was first applied by the CPE. - 2.0
Description string(:256) R A description of the vendor configuration file (human-readable string). - 2.0
UseForBackupRestore boolean R When true, this parameter indicates that this VendorConfigFile instance is to be used for backup and restoration purposes. Note: The backup and restore operations may require the use of multiple VendorConfigFile instances. In this scenario the mechanism for detemining the order and combination of VendorConfigFile instances used for backup and restoration purposes is implementation specific. - 2.7
Backup() command - [ASYNC] This command is issued to upload the configuration file specified by this VendorConfigFile instance. All results of the actual upload will be contained within the Device.LocalAgent.TransferComplete! event. - 2.12
⇒ Input. arguments - Input arguments. -
URL string(:2048) W [MANDATORY] The [URL] specifying the destination file location. HTTP and HTTPS transports MUST be supported. This argument specifies only the destination file location, and does not indicate in any way the name or location of the local file to be uploaded. If the Agent receives multiple upload requests with the same URL, the Agent MUST perform each upload as requested, and MUST NOT assume that the content of the file to be uploaded is the same each time. This URL MUST NOT include the “userinfo” component, as defined in [RFC3986]. - 2.12
Username string(:256) W [MANDATORY] Username to be used by the Agent to authenticate with the file server. This string is set to an empty string if no authentication is required. - 2.12
Password string(:256) W [MANDATORY] Password to be used by the Agent to authenticate with the file server. This string is set to an empty string if no authentication is required. - 2.12
Restore() command - [ASYNC] This command is issued to download a configuration file into this VendorConfigFile instance. All results of the actual download will be contained within the Device.LocalAgent.TransferComplete! event. - 2.12
⇒ Input. arguments - Input arguments. -
URL string(:2048) W [MANDATORY] The [URL] specifying the source file location. HTTP and HTTPS transports MUST be supported. If the Agent receives multiple download requests with the same source URL, the Agent MUST perform each download as requested, and MUST NOT assume that the content of the file to be downloaded is the same each time. This URL MUST NOT include the “userinfo” component, as defined in [RFC3986]. - 2.12
Username string(:256) W [MANDATORY] Username to be used by the Agent to authenticate with the file server. This string is set to an empty string if no authentication is required. - 2.12
Password string(:256) W [MANDATORY] Password to be used by the Agent to authenticate with the file server. This string is set to an empty string if no authentication is required. - 2.12
FileSize unsignedInt W The size of the file to be downloaded in bytes. The FileSize argument is intended as a hint to the Agent, which the Agent MAY use to determine if it has sufficient space for the file to be downloaded, or to prepare space to accept the file. The Controller MAY set this value to zero. The Agent MUST interpret a zero value to mean that that the Controller has provided no information about the file size. In this case, the Agent MUST attempt to proceed with the download under the presumption that sufficient space is available, though during the course of download, the Agent might determine otherwise. The Controller SHOULD set the value of this Parameter to the exact size of the file to be downloaded. If the value is non-zero, the Agent MAY reject the ScheduleDownload request on the basis of insufficient space. If the Agent attempts to proceed with the download based on the value of this argument, but the actual file size differs from the value of this argument, this could result in a failure of the download. However, the Agent MUST NOT cause the download to fail solely because it determines that the value of this argument is inaccurate. - 2.12
TargetFileName string(:256) W The name of the file to be used on the target file system. This argument MAY be an empty string if the target file name can be extracted from the downloaded file itself, or from the URL argument, or if no target file name is needed. If this argument is specified, but the target file name is also indicated by another source (for example, if it is extracted from the downloaded file itself), this argument MUST be ignored. If the target file name is used, the downloaded file would replace any existing file of the same name (whether or not the Agent archives the replaced file is a local matter). If present, this Parameter is treated as an opaque string with no specific requirements for its format. That is, the TargetFileName value is to be interpreted based on the Agent’s vendor-specific file naming conventions. Note that this specification does not preclude the use of a file naming convention in which the file’s path can be specified as part of the file name. - 2.12
CheckSumAlgorithm string W

The hash algorithm to use when performing a checksum validation of the downloaded file. If the CheckSum input argument is specified, the Agent MUST validate the integrity of the downloaded file by comparing the value contained in the CheckSum input argument against a hash of the downloaded file.

Enumeration of:

  • SHA-1 (As specified in [RFC3174])
  • SHA-224 (As specified in [RFC6234])
  • SHA-256 (As specified in [RFC6234])
  • SHA-384 (As specified in [RFC6234])
  • SHA-512 (As specified in [RFC6234])
- 2.12
CheckSum hexBinary W The hash value of the downloaded file used to validate the integrity of the downloaded file. If this argument is specified, the Agent MUST validate the integrity of the downloaded file by comparing the provided value against a hash of the downloaded file using the hashing algorithm specified in the CheckSumAlgorithm input argument. If this argument is an empty string, the Agent MUST NOT perform a checksum validation of the downloaded file. - 2.12
Device.DeviceInfo.MemoryStatus. object R Status of the device’s volatile physical memory. - 2.0
Total unsignedInt R The total physical RAM, in kilobytes, installed on the device. - 2.0
Free unsignedInt R

The free physical RAM, in kilobytes, currently available on the device.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DeviceInfo.ProcessStatus. object R Status of the processes on the device. - 2.0
CPUUsage unsignedInt(:100) R

The total amount of the CPU, in percent, rounded up to the nearest whole percent. In the case that multiple CPU are present, this value represents the average of all CPU.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ProcessNumberOfEntries unsignedInt R The number of entries in the Process table. - 2.0
Device.DeviceInfo.ProcessStatus.Process.{i}. object(0:) R

List of all processes running on the device.

At most one entry in this table can exist with a given value for PID.

- 2.0
PID unsignedInt R The Process Identifier. - 2.0
Command string(:256) R The name of the command that has caused the process to exist. - 2.0
Size unsignedInt R

The size in kilobytes of the memory occupied by the process.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Priority unsignedInt(:99) R The priority of the process where 0 is highest. - 2.0
CPUTime unsignedInt R

The amount of time in milliseconds that the process has spent taking up CPU time since the process was started.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
State string R

The current state that the process is in.

Enumeration of:

  • Running
  • Sleeping
  • Stopped
  • Idle (OPTIONAL)
  • Uninterruptible (OPTIONAL)
  • Zombie (OPTIONAL)

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DeviceInfo.TemperatureStatus. object R Status of the temperature of the device. - 2.0
TemperatureSensorNumberOfEntries unsignedInt R The number of entries in the TemperatureSensor table. - 2.0
Device.DeviceInfo.TemperatureStatus.TemperatureSensor.{i}. object(0:) R

This object represents information that the device has obtained via sampling an internal temperature sensor.

At most one entry in this table can exist with a given value for Name, or with a given value for Alias.

- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.3
Enable boolean W Indicates whether or not the temperature sensor is enabled. - 2.0
Status string R

The status of this temperature sensor.

Enumeration of:

  • Disabled (The sensor is not currently sampling the temperature)
  • Enabled (The sensor is currently sampling the temperature)
  • Error (The sensor error currently prevents sampling the temperature)
- 2.0
Reset() command - Resets the temperature sensor. - 2.12
ResetTime dateTime R The time at which this temperature sensor was reset. Reset can be caused by:
  • Status transition from Disabled to Enabled
  • {{param: non-existent Reset}} set to true.
  • An internal reset of the temperature sensor (including a reboot of the device). The Unknown Time value, as defined in [TR-106], indicates that this temperature sensor has never been reset, which can only happen if it has never been enabled.
- 2.0
Name string(:256) R Name of this temperature sensor. This text MUST be sufficient to distinguish this temperature sensor from other temperature sensors. - 2.0
Value int(-274:) R

This temperature sensor’s last good reading in degrees celsius. A value of -274 (which is below absolute zero) indicates a good reading has not been obtained since last reset.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LastUpdate dateTime R

The time at which this temperature sensor’s last good reading was obtained. The Unknown Time value, as defined in [TR-106], indicates a good reading has not been obtained since last reset.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MinValue int(-274:) R This temperature sensor’s lowest value reading in degrees celsius since last reset. A value of -274 (which is below absolute zero) indicates a good reading has not been obtained since last reset. - 2.0
MinTime dateTime R The time at which this temperature sensor’s lowest value was read. The Unknown Time value, as defined in [TR-106], indicates a good reading has not been obtained since last reset. - 2.0
MaxValue int(-274:) R This temperature sensor’s highest value reading in degrees celsius since last reset. A value of -274 (which is below absolute zero) indicates a good reading has not been obtained since last reset. - 2.0
MaxTime dateTime R The time at which this temperature sensor’s highest value was read. The Unknown Time value, as defined in [TR-106], indicates a good reading has not been obtained since last reset. - 2.0
LowAlarmValue int(-274:) W This temperature sensor’s low alarm value in degrees celsius. A value of -274 (which is below absolute zero) indicates a non configured value. A change to this value will cause LowAlarmTime to be reset. - 2.0
LowAlarmTime dateTime R Initial time at which this temperature sensor’s LowAlarmValue was encountered. This value is only set the first time the alarm is seen and not changed until the next reset. The Unknown Time value, as defined in [TR-106], indicates that an alarm has not been encountered since the last reset. - 2.0
HighAlarmValue int(-274:) W This temperature sensor’s high alarm value in degrees celsius. A value of -274 (which is below absolute zero) indicates a non configured value. A change to this value will cause HighAlarmTime to be reset. - 2.0
PollingInterval unsignedInt W The interval, measured in seconds, in which the device polls this TemperatureSensor. If the value is 0 then the device selects its own polling interval. If the value is greater than 0 then the device MUST use this value as the polling interval. - 2.1
HighAlarmTime dateTime R Initial time at which this temperature sensor’s HighAlarmValue was encountered. This value is only set the first time the alarm is seen and not changed until the next reset. The Unknown Time value, as defined in [TR-106], indicates that an alarm has not been encountered since the last reset. - 2.0
Device.DeviceInfo.NetworkProperties. object R This object defines the parameters that describe how the device handles network traffic. - 2.0
MaxTCPWindowSize unsignedInt R The maximum number of bytes of outstanding data a sender can send on a particular connection prior to an acknowledgment [RFC793]. Any scaling factor SHOULD be included in this parameter [RFC1323]. - 2.0
TCPImplementation string[] R

Comma-separated list of strings. Indicates the TCP congestion control mechanism(s) implemented. Each list item is an enumeration of:

  • Tahoe (Represents the base TCP implementation in [RFC793] and elements of [RFC2582])
  • Reno (Represents the base TCP implementation in [RFC793] with the additional algorithms defined in [RFC2581])
  • New Reno (Described as a modification to the Reno algorithms in [RFC2582])
  • Vegas (An emerging TCP congestion control mechanism) Tahoe, Reno, and New Reno are defined in [RFC2582]
- 2.0
Device.DeviceInfo.Processor.{i}. object(0:) R

Each table entry represents a hardware or virtual processor that resides on this device.

At most one entry in this table can exist with a given value for Alias.

- 2.1
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.3
Architecture string R

The architecture of the processor on the underlying hardware. Enumeration of:

  • arm
  • i386
  • m68010
  • m68k
  • mipseb (big-endian)
  • mipsel (little-endian)
  • powerpc
  • sh3eb (big-endian)
  • sh3el (little-endian)
  • x86_64 For processor architectures not included in this list, the vendor MAY include vendor-specific values, which MUST use the format defined in [Section 3.3/TR-106].
- 2.1
Device.DeviceInfo.VendorLogFile.{i}. object(0:) R

Each table entry represents a Vendor Log File. This table of log files is informational only and does not allow the Controller to operate on these files in any way.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.1
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.1
Name string(:64) R Name of the log file. Typically this will be the full file system path, but provided that it is guaranteed to be unique across current and future log files, it MAY be a shorter name derived from the file system path, or be derived via another mechanism. - 2.1
MaximumSize unsignedInt R The maximum size of the log file in bytes. If the device doesn’t know the maximum file size then MaximumSize will be 0. - 2.1
Persistent boolean R When true, the log file contents are preserved across a device reboot. When false, the log file contents will be purged when the device is rebooted. - 2.1
Upload() command - [ASYNC] This command is issued to upload the log file specified by this Vendor Log File instance. All results of the actual upload will be contained within the Device.LocalAgent.TransferComplete! event. - 2.12
⇒ Input. arguments - Input arguments. -
URL string(:2048) W [MANDATORY] The [URL] specifying the destination file location. HTTP and HTTPS transports MUST be supported. This argument specifies only the destination file location, and does not indicate in any way the name or location of the local file to be uploaded. If the Agent receives multiple upload requests with the same URL, the Agent MUST perform each upload as requested, and MUST NOT assume that the content of the file to be uploaded is the same each time. This URL MUST NOT include the “userinfo” component, as defined in [RFC3986]. - 2.12
Username string(:256) W [MANDATORY] Username to be used by the Agent to authenticate with the file server. This string is set to an empty string if no authentication is required. - 2.12
Password string(:256) W [MANDATORY] Password to be used by the Agent to authenticate with the file server. This string is set to an empty string if no authentication is required. - 2.12
Device.DeviceInfo.Location.{i}. object(0:) W

This object contains Location information.

At most one entry in this table can exist with the same values for both Source and ExternalSource. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for ExternalSource such that the new entry does not conflict with any existing entries.

- 2.4
Source string R

Identifies the source of the location data.

Enumeration of:

  • GPS
  • AGPS
  • Manual
  • External
External 2.4
AcquiredTime dateTime R The time when the location was acquired. - 2.4
ExternalSource string R

URL, MAC address, or other identifier that identifies an “External” source of this location. Meaningful only if Source has a value of External, otherwise it MUST be an empty string. If ExternalProtocol has a value of CWMP, this is the URL or IP address of the Controller.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

- 2.4
ExternalProtocol string R

Protocol used to acquire a location from an “External” source. Enumeration of:

  • <Empty> (An empty string)
  • CWMP
  • USP
  • OMA-DM
  • SNMP
  • UPnP
  • HELD
  • DHCPv4
  • DHCPv6
  • LLDP-MED
  • MLP
  • Other Meaningful only if Source has a value of External, otherwise it MUST be an empty string.
CWMP 2.4
DataObject string(:1200) W The currently valid location information. Writable only when ExternalProtocol has a value of CWMP or USP. If obtained through the local GPS/AGPS then the location information is formatted according to [RFC5491]. If manually configured then location information will be XML-formatted according to [RFC5491] (geographical information) and [RFC5139] (civic addresses). If obtained by an external source this is the location information as received. If it’s an XML document (e.g. CWMP, OMA-DM, UPnP, HELD, MLP) the location information will be represented as-is, otherwise it will be converted to base64. CWMP or USP configured location information will be XML-formatted according to [RFC5491] (geographical information) and [RFC5139] (civic addresses). Only zero or one Location object instance with value CWMP or USP MUST exist at any given time. - 2.4
Device.DeviceInfo.DeviceImageFile.{i}. object(0:) R

This object describes an image of the device.

At most one entry in this table can exist with a given value for Location, or with a given value for Alias.

- 2.11
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
Location string R

The location of the device that represents the image as the user looks at the front of the device in its typical orientation (e.g., on-end, flat).

Enumeration of:

  • Front
  • Back
  • Left
  • Right
  • Top
  • Bottom
- 2.11
Image base64 R The device image in PNG, JPEG or GIF format. - 2.11
Device.DeviceInfo.FirmwareImage.{i}. object(0:) R

Top-level object for mapping firmware images. This is a static table – the number of object instances in this table is defined by the firmware that is currently running.

At most one entry in this table can exist with a given value for Alias.

- 2.12
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.12
Name string(:64) R Firmware/software image name. Descriptive text of the image or filename. The value of Name is an empty string if Status is anything other than Available, InstallationFailed, or ActivationFailed. - 2.12
Version string(:64) R A string identifying the version of the firmware image represented by this FirmwareImage. Whenever this firmware image is active (ie, the device has booted this firmware image), the value of the DeviceInfo.SoftwareVersion parameter MUST be the same as the value contained in this parameter. To allow version comparisons, this element SHOULD be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 3.0.21 where the components mean: Major.Minor.Build. The value of Version is an empty string if Status is anything other than Available, InstallationFailed, or ActivationFailed. - 2.12
Available boolean W Specifies whether or not this particular firmware image can be used by the Agent. An Agent will only attempt to boot this particular firmware image if this parameter value is set to true. This value MUST be set to true by the device whenever a new firmware image is installed. This value cannot be set to false if the firmware image is active or is referenced by the BootFirmwareImage parameter. Firmware image instances cannot be deleted, so a Controller MAY use this parameter to subsequently mark a particular firmware as being invalid, which will prevent the Agent from attempting to boot it. - 2.12
Status string R

Status of the firmware image, as determined by the Agent. Enumeration of:

  • NoImage (This Firmware Image instance is empty. This value could happen on an Agent that supports multiple firmware images, but only has a single image installed)
  • Active (This Firmware Image instance is the currently active image)
  • Downloading (This Firmware Image instance is being downloaded)
  • Validating (This Firmware Image instance has been downloaded, and is in the process of being validated)
  • Available (This Firmware Image instance has been downloaded, validated, and installed, and is ready to be activated)
  • DownloadFailed (The Agent has attempted to download this Firmware Image instance, but ultimately failed while retrieving it from the source URL)
  • ValidationFailed (The Agent has attempted to validate a Firmware Image downloaded to this instance, but ultimately failed while validating it)
  • InstallationFailed (The Agent has attempted to install a Firmware Image downloaded and validated to this instance, but ultimately failed while installing it)
  • ActivationFailed (The Agent has attempted to active this Firmware Image instance, but ultimately failed while being activated)
- 2.12
BootFailureLog string R If the Agent is unable to boot into this firmware image, when specified, the Agent can use this parameter to record some information as to why the boot failed. If the Agent successfully boots into this firmware, the value of this parameter SHOULD be an empty string. When a new firmware image is installed into this object instance, this parameter MUST be cleared. The length of this string is defined as implementation-specific by the Agent. - 2.12
Download() command - [ASYNC] This command is issued to download a firmware into this Firmware Image instance. All results of the actual download will be contained within the Device.LocalAgent.TransferComplete! event. - 2.12
⇒ Input. arguments - Input arguments. -
URL string(:2048) W [MANDATORY] The [URL] specifying the source file location. HTTP and HTTPS transports MUST be supported. If the Agent receives multiple download requests with the same source URL, the Agent MUST perform each download as requested, and MUST NOT assume that the content of the file to be downloaded is the same each time. This URL MUST NOT include the “userinfo” component, as defined in [RFC3986]. - 2.12
AutoActivate boolean W [MANDATORY] If true the Agent MUST automatically activate the firmware once it is successfully downloaded. If false the Agent MUST NOT activate the firmware until explicitly instructed to do so by either invoking Activate() or setting BootFirmwareImage and rebooting the Agent. - 2.12
Username string(:256) W Username to be used by the Agent to authenticate with the file server. This argument is omitted if no authentication is required. - 2.12
Password string(:256) W Password to be used by the Agent to authenticate with the file server. This argument is omitted if no authentication is required. - 2.12
FileSize unsignedInt W The size of the file to be downloaded in bytes. The FileSize argument is intended as a hint to the Agent, which the Agent MAY use to determine if it has sufficient space for the file to be downloaded, or to prepare space to accept the file. The Controller MAY set this value to zero. The Agent MUST interpret a zero value to mean that that the Controller has provided no information about the file size. In this case, the Agent MUST attempt to proceed with the download under the presumption that sufficient space is available, though during the course of download, the Agent might determine otherwise. The Controller SHOULD set the value of this Parameter to the exact size of the file to be downloaded. If the value is non-zero, the Agent MAY reject the ScheduleDownload request on the basis of insufficient space. If the Agent attempts to proceed with the download based on the value of this argument, but the actual file size differs from the value of this argument, this could result in a failure of the download. However, the Agent MUST NOT cause the download to fail solely because it determines that the value of this argument is inaccurate. - 2.12
CheckSumAlgorithm string W

The hash algorithm to use when performing a checksum validation of the downloaded file. If the CheckSum input argument is specified, the Agent MUST validate the integrity of the downloaded file by comparing the value contained in the CheckSum input argument against a hash of the downloaded file.

Enumeration of:

  • SHA-1 (As specified in [RFC3174])
  • SHA-224 (As specified in [RFC6234])
  • SHA-256 (As specified in [RFC6234])
  • SHA-384 (As specified in [RFC6234])
  • SHA-512 (As specified in [RFC6234])
- 2.12
CheckSum hexBinary W The hash value of the downloaded file used to validate the integrity of the downloaded file. If this argument is specified, the Agent MUST validate the integrity of the downloaded file by comparing the provided value against a hash of the downloaded file using the hashing algorithm specified in the CheckSumAlgorithm input argument. If this argument is an empty string, the Agent MUST NOT perform a checksum validation of the downloaded file. - 2.12
Activate() command - [ASYNC] This command is issued to activate this FirmwareImage instance. A FirmwareImage instance can also be activated by setting the Device.DeviceInfo.BootFirmwareImage parameter and causing the Agent to reboot. A successful activation will result in a reboot of the device with this FirmwareImage as the currently running firmware image. Furthermore, this FirmwareImage will be referenced by the Device.DeviceInfo.ActiveFirmwareImage parameter. A failed activation will result in this FirmwareImage instance’s BootFailureLog being updated. - 2.12
⇒ Input. arguments - Input arguments. -
TimeWindow.{i}. object(1:5) W

The time window(s) that dictate when the Agent activates the firmware image. An Agent MUST be able to accept a request with either one or two TimeWindow instances. The time windows MUST NOT overlap, i.e. if there are two time windows, the second window’s Start value has to be greater than or equal to the first window’s End value.

This table MUST contain at least 1 and at most 5 entries. This table’s Instance Numbers MUST be 1, 2, 3… (assigned sequentially without gaps).

- 2.12
Start unsignedInt W [MANDATORY] Start of this time window as an offset in seconds after invoking the command. An offset is used in order to avoid a dependence on absolute time. - 2.12
End unsignedInt W [MANDATORY] End of this time window as an offset in seconds after invoking the command. An offset is used in order to avoid a dependence on absolute time. - 2.12
Mode string W

[MANDATORY] Specifies when within this time window the Agent is permitted to activate the specified firmware image.

Enumeration of:

  • AnyTime (The Agent MAY activate the firmware image at any time during the time window even if this results in interruption of service for the subscriber)
  • Immediately (The Agent MUST activate the firmware image immediately at the start of the time window even if this results in interruption of service for the subscriber)
  • WhenIdle (The Agent MUST NOT cause an interruption of service from the subscriber’s standpoint while activating the firmware image during the time window. How the Agent determines this is outside the scope of this specification)
  • ConfirmationNeeded (The Agent MUST ask for and receive confirmation before activating the firmware image. It is outside the scope of this specification how the Agent asks for and receives this confirmation. If confirmation is not received, this time window MUST NOT be used)
- 2.12
UserMessage string W A message that informs the user of a request to activate a new firmware image. The Agent MAY use this message when seeking confirmation from the user, e.g. when Mode is ConfirmationNeeded. When there is no need for such a message, it SHOULD be an empty string and MUST be ignored. - 2.12
MaxRetries int(-1:10) W The maximum number of retries for activating the firmware image before regarding the transfer as having failed. Refers only to this time window (each time window can specify its own value). A value of 0 means “No retries are permitted”. A value of -1 means “the Agent determines the number of retries”, i.e. that the Agent can use its own retry policy, not that it has to retry forever. Only applicable when the Mode input argument is ConfirmationNeeded, otherwise this input argument MUST be ignored. - 2.12
Device.Time. object R This object contains parameters relating an NTP or SNTP time client in the CPE. - 2.0
Enable boolean W Enables or disables the NTP or SNTP time client. - 2.0
Status string R

Status of Time support on the CPE. Enumeration of:

  • Disabled
  • Unsynchronized
  • Synchronized
  • Error_FailedToSynchronize
  • Error (OPTIONAL) The Unsynchronized value indicates that the CPE’s absolute time has not yet been set. The Synchronized value indicates that the CPE has acquired accurate absolute time; its current time is accurate. The Error_FailedToSynchronize value indicates that the CPE failed to acquire accurate absolute time; its current time is not accurate. The Error value MAY be used by the CPE to indicate a locally defined error condition.
- 2.0
NTPServer1 string(:64) W First NTP timeserver. Either a host name or IP address. - 2.0
NTPServer2 string(:64) W Second NTP timeserver. Either a host name or IP address. - 2.0
NTPServer3 string(:64) W Third NTP timeserver. Either a host name or IP address. - 2.0
NTPServer4 string(:64) W Fourth NTP timeserver. Either a host name or IP address. - 2.0
NTPServer5 string(:64) W Fifth NTP timeserver. Either a host name or IP address. - 2.0
CurrentLocalTime dateTime R

The current date and time in the CPE’s local time zone.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LocalTimeZone string(:256) W

The local time zone definition, encoded according to IEEE 1003.1 (POSIX). The following is an example value:

EST+5 EDT,M4.1.0/2,M10.5.0/2
- 2.0
Device.UserInterface. object R This object contains parameters relating to the user interface of the CPE. - 2.0
Enable boolean W

Enables and disables the CPE’s user interface.

The factory default value MUST be true.

- 2.11
PasswordRequired boolean W Present only if the CPE provides a password-protected LAN-side user interface. Indicates whether or not the local user interface MUST require a password to be chosen by the user. If false, the choice of whether or not a password is used is left to the user. - 2.0
PasswordUserSelectable boolean W Present only if the CPE provides a password-protected LAN-side user interface and supports LAN-side Auto-Configuration. Indicates whether or not a password to protect the local user interface of the CPE MAY be selected by the user directly (i.e. Users.User.{i}.Password), or MUST be equal to the password used by the LAN-side Auto-Configuration protocol (i.e. LANConfigSecurity.ConfigPassword). - 2.0
PasswordReset() command - Present only if the Agent provides a password-protected LAN-side user interface and supports LAN-side Auto-Configuration. Reset LANConfigSecurity.ConfigPassword to its factory value. - 2.12
UpgradeAvailable boolean W Indicates that a CPE upgrade is available, allowing the CPE to display this information to the user. - 2.0
WarrantyDate dateTime W Indicates the date and time in UTC that the warranty associated with the CPE is to expire. - 2.0
ISPName string(:64) W The name of the customer’s ISP. - 2.0
ISPHelpDesk string(:32) W The help desk phone number of the ISP. - 2.0
ISPHomePage string(:2048) W The [URL] of the ISP’s home page. - 2.0
ISPHelpPage string(:2048) W The [URL] of the ISP’s on-line support page. - 2.0
base64(0:4095) W Base64 encoded GIF or JPEG image. The binary image is constrained to 4095 bytes or less. - 2.0
ISPLogoSize unsignedInt(0:4095) W Un-encoded binary image size in bytes. If ISPLogoSize input value is 0 then the ISPLogo is cleared. ISPLogoSize can also be used as a check to verify correct transfer and conversion of Base64 string to image size. - 2.0
ISPMailServer string(:2048) W The [URL] of the ISP’s mail server. - 2.0
ISPNewsServer string(:2048) W The [URL] of the ISP’s news server. - 2.0
TextColor hexBinary(3) W The color of text on the GUI screens in RGB hexadecimal notation (e.g., FF0088). - 2.0
BackgroundColor hexBinary(3) W The color of the GUI screen backgrounds in RGB hexadecimal notation (e.g., FF0088). - 2.0
ButtonColor hexBinary(3) W The color of buttons on the GUI screens in RGB hexadecimal notation (e.g., FF0088). - 2.0
ButtonTextColor hexBinary(3) W The color of text on buttons on the GUI screens in RGB hexadecimal notation (e.g., FF0088). - 2.0
AutoUpdateServer string(:256) W The server the CPE can check to see if an update is available for direct download to it. - 2.0
UserUpdateServer string(:256) W The server where a user can check via a web browser if an update is available for download to a PC. - 2.0
AvailableLanguages string[](:256) R Comma-separated list (maximum number of characters 256) of strings. List items represent user-interface languages that are available, where each language is specified according to [RFC3066]. - 2.0
CurrentLanguage string(:16) W Current user-interface language, specified according to [RFC3066]. The value MUST be a member of the list reported by the AvailableLanguages parameter. - 2.0
Device.UserInterface.RemoteAccess. object R This object contains parameters relating to remotely accessing the CPE’s user interface. Remote access is defined as any entity not of a local subnet attempting to connect to the CPE. Remote access requires user authentication. To provide remote access authentication the CPE MUST support a “User” table with at least one instance that has “RemoteAccessCapable” set to true. - 2.0
Enable boolean W Enables/Disables remotely accessing the CPE’s user interface. - 2.0
Port unsignedInt(:65535) W Destination TCP port required for remote access connection. - 2.0
SupportedProtocols string[] R

Comma-separated list of strings. Indicates the protocols that are supported by the CPE for the purpose of remotely accessing the user interface.

Each list item is an enumeration of:

- 2.0
Protocol string W The value MUST be a member of the list reported by the SupportedProtocols parameter. This is the protocol currently being used for remote access. - 2.0
Device.UserInterface.LocalDisplay. object R This object describes how to remotely manage the initial positioning of a user interface on a device’s local display. - 2.0
Movable boolean W Controls whether the user is allowed to change the GUI window position on the local CPE’s display. - 2.0
Resizable boolean W Controls whether the user is allowed to resize the GUI window on the local CPE’s display. - 2.0
PosX int W

The horizontal position of the User Interface’s top left corner within the local CPE’s display measured from the top left corner, expressed in pixels.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PosY int W

The vertical position of the User Interface’s top left corner within the local CPE’s display measured from the top left corner, expressed in pixels.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Width unsignedInt W

The width of the user interface within the local CPE’s display, expressed in pixels.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Height unsignedInt W

The height of the user interface within the local CPE’s display, expressed in pixels.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DisplayWidth unsignedInt R The width of the local CPE’s display, expressed in pixels. - 2.0
DisplayHeight unsignedInt R The height of the local CPE’s display, expressed in pixels. - 2.0
Device.UserInterface.Messages. object R Definition of user information message displays. - 2.11
Enable boolean W

Enables and displays the user information message.

The factory default value MUST be true.

- 2.11
Title string(:128) W Message title to be displayed. - 2.11
SubTitle string(:128) W Message sub title to be displayed. - 2.11
Text string W Message text. - 2.11
IconType string W

Icon to be displayed.

Enumeration of:

  • None
  • Greeting
  • Information
  • Warning
  • Important
  • Urgent
  • Advertisement
- 2.11
MessageColor hexBinary(3) W The color of message text in RGB hexadecimal notation (e.g., FF0088). - 2.11
BackgroundColor hexBinary(3) W The color of the message screen background in RGB hexadecimal notation (e.g., FF0088). - 2.11
TitleColor hexBinary(3) W The color of the message title in RGB hexadecimal notation (e.g., FF0088). - 2.11
SubTitleColor hexBinary(3) W The color of the sub title in RGB hexadecimal notation (e.g., FF0088). - 2.11
RequestedNumberOfRepetitions unsignedInt W The number of times the device SHOULD repeat the message. - 2.11
ExecutedNumberOfRepetitions unsignedInt R The number of times the device repeated the message. - 2.11
Device.InterfaceStack.{i}. object(0:) R

This table contains information about the relationships between the multiple layers of interface objects ([Section 4.3/TR-181i2]). In particular, it contains information on which interfaces run on top of which other interfaces. This table is auto-generated by the CPE based on the LowerLayers parameters on individual interface objects. Each table row represents a “link” between two interface objects, a higher-layer interface object (referenced by HigherLayer) and a lower-layer interface object (referenced by LowerLayer). Consequently, if a referenced interface object is deleted, the CPE MUST delete the corresponding InterfaceStack row(s) that had referenced it.

At most one entry in this table can exist with the same values for both HigherLayer and LowerLayer, or with a given value for Alias.

- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.3
HigherLayer string(:256) R A reference to the interface object corresponding to the higher layer of the relationship, i.e. the interface which runs on top of the interface identified by the corresponding instance of LowerLayer. When the referenced higher layer interface is deleted, the CPE MUST delete the table row. - 2.0
LowerLayer string(:256) R A reference to the interface object corresponding to the lower layer of the relationship, i.e. the interface which runs below the interface identified by the corresponding instance of HigherLayer. When the referenced lower layer interface is deleted, the CPE MUST delete the table row. - 2.0
HigherAlias string(:64) R The value of the Alias parameter for the interface object referenced by HigherLayer. - 2.0
LowerAlias string(:64) R The value of the Alias parameter for the interface object referenced by LowerLayer. - 2.0
Device.DSL. object R This object models DSL lines, DSL channels, DSL bonding, and DSL diagnostics. The specific interface objects defined here are Line, Channel, and BondingGroup. Each Line models a layer 1 DSL Line interface, and each Channel models a layer 1 DSL Channel interface where multiple channels can run over a DSL line. In the case where bonding is configured, it is expected that BondingGroup is stacked above the Channel instances within its group. - 2.0
LineNumberOfEntries unsignedInt R The number of entries in the Line table. - 2.0
ChannelNumberOfEntries unsignedInt R The number of entries in the Channel table. - 2.0
BondingGroupNumberOfEntries unsignedInt R The number of entries in the BondingGroup table. - 2.0
Device.DSL.Line.{i}. object(0:) R

DSL Line table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models physical DSL lines.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
Enable boolean W Enables or disables the DSL line. This parameter is based on ifAdminStatus from [RFC2863]. - 2.0
EnableDataGathering boolean W Enables or disables data gathering on the DSL line. - 2.8
Status string R

The current operational state of the DSL line (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the DSL line as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the DSL line entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Line is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.0
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.0
FirmwareVersion string(:64) R A string identifying the version of the modem firmware currently installed for this interface. This is applicable only when the modem firmware is separable from the overall CPE software. - 2.0
LinkStatus string R

Status of the DSL physical link. Enumeration of:

- 2.0
StandardsSupported string[] R

Comma-separated list of strings. List items indicate which DSL standards and recommendations are supported by the Line instance. Each list item is an enumeration of:

  • G.992.1_Annex_A
  • G.992.1_Annex_B
  • G.992.1_Annex_C
  • T1.413
  • T1.413i2
  • ETSI_101_388
  • G.992.2
  • G.992.3_Annex_A
  • G.992.3_Annex_B
  • G.992.3_Annex_C
  • G.992.3_Annex_I
  • G.992.3_Annex_J
  • G.992.3_Annex_L
  • G.992.3_Annex_M
  • G.992.4
  • G.992.5_Annex_A
  • G.992.5_Annex_B
  • G.992.5_Annex_C
  • G.992.5_Annex_I
  • G.992.5_Annex_J
  • G.992.5_Annex_M
  • G.993.1
  • G.993.1_Annex_A
  • G.993.2_Annex_A
  • G.993.2_Annex_B
  • G.993.2_Annex_C Note: In G.997.1, this parameter is called “xDSL Transmission system capabilities”. See ITU-T Recommendation [G.997.1]. This parameter was DEPRECATED because its entries are out-of-date; XTSE points to a current list. Therefore its value MAY be an empty string if (and only if) XTSE is supported. This parameter is OBSOLETED in 2.14.
- 2.0
XTSE hexBinary(8) R This configuration parameter defines the transmission system types to be allowed by the xTU on this Line instance. Each bit is 0 if not allowed or 1 if allowed, as defined for the xTU transmission system enabling (XTSE) in ITU-T G.997.1. Note: This parameter is defined as xDSL Transmission system enabling (XTSE) in ITU-T G.997.1. For a full definition, see Clause 7.3.1.1.1 of ITU-T Recommendation [G.997.1]. - 2.8
StandardUsed string R The value MUST be a member of the list reported by the StandardsSupported parameter. Indicates the standard that the Line instance is using for the connection. Note: In G.997.1, this parameter is called “xDSL Transmission system”. See ITU-T Recommendation [G.997.1]. This parameter was DEPRECATED because its entries are out-of-date; XTSE points to a current list. Therefore its value MAY be an empty string if (and only if) XTSUsed is supported. This parameter is OBSOLETED in 2.14. - 2.0
XTSUsed hexBinary(8) R This parameter indicates which DSL standard and recommendation are currently in use by the Line instance. Only one bit is set, as defined for the xTU transmission system enabling (XTSE) in ITU-T G.997.1. - 2.8
LineEncoding string R

The line encoding method used in establishing the Layer 1 DSL connection between the CPE and the DSLAM. Enumeration of:

  • DMT
  • CAP
  • 2B1Q
  • 43BT
  • PAM
  • QAM Note: Generally speaking, this variable does not change after provisioning.
- 2.0
AllowedProfiles string[] R

Comma-separated list of strings. List items indicate which VDSL2 profiles are allowed on the line. Each list item is an enumeration of:

  • 8a
  • 8b
  • 8c
  • 8d
  • 12a
  • 12b
  • 17a
  • 17b (DELETED)
  • 30a
  • 35b Note: In G.997.1, this parameter is called PROFILES. See ITU-T Recommendation [G.997.1]. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be an empty string.
- 2.0
CurrentProfile string R The value MUST be a member of the list reported by the AllowedProfiles parameter, or else be an empty string. Indicates which VDSL2 profile is currently in use on the line. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be an empty string. - 2.0
PowerManagementState string R

The power management state of the line. Enumeration of:

  • L0
  • L1
  • L2
  • L3
  • L4 Note: See ITU-T Recommendation [G.997.1].
- 2.0
SuccessFailureCause unsignedInt(0:6) R The success failure cause of the initialization. An enumeration of the following integer values:
  • 0: Successful
  • 1: Configuration error. This error occurs with inconsistencies in configuration parameters, e.g. when the line is initialized in an xDSL Transmission system where an xTU does not support the configured Maximum Delay or the configured Minimum or Maximum Data Rate for one or more bearer channels.
  • 2: Configuration not feasible on the line. This error occurs if the Minimum Data Rate cannot be reached on the line with the Minimum Noise Margin, Maximum PSD level, Maximum Delay and Maximum Bit Error Ratio for one or more bearer channels.
  • 3: Communication problem. This error occurs, for example, due to corrupted messages or bad syntax messages or if no common mode can be selected in the G.994.1 handshaking procedure or due to a timeout.
  • 4: No peer xTU detected. This error occurs if the peer xTU is not powered or not connected or if the line is too long to allow detection of a peer xTU.
  • 5: Any other or unknown Initialization Failure cause.
  • 6: ITU T G.998.4 retransmission mode was not selected while RTX_MODE = FORCED or with RTX_MODE = RTX_TESTMODE. Note: In G.997.1, this parameter is called “Initialization success/failure cause”. See Clause 7.5.1.6 of ITU-T Recommendation [G.997.1].
- 2.0
UPBOKLER unsignedInt(0:1280) R This parameter contains the estimated electrical loop length estimated by the VTU-R expressed in 0.1 dB at 1MHz (see O-UPDATE in section 12.2.4.2.1.2/G.993.2). The value is coded as an unsignedInt in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Note: This parameter is defined as UPBOKLE-R in Clause 7.5.1.23.2 of ITU-T Recommendation [G.997.1]. - 2.8
UPBOKLEPb unsignedInt(0:1280,2047)[] R Comma-separated list of unsigned integers (0 to 1280, or 2047). VTU-O estimated upstream power back-off electrical length per band. This parameter is a vector of UPBO electrical length per-band estimates for each supported downstream band, expressed in 0.1 dB at 1 MHz (kl0) calculated by the VTU-R, based on separate measurements in the supported upstream bands. The value of each list element ranges from 0 to 128 dB in steps of 0.1 dB, with special value 204.7 which indicates that the estimate is greater than 128 dB. This parameter is required for the alternative electrical length estimation method (ELE-M1). Note: This parameter is defined as UPBOKLE-pb in Clause 7.5.1.23.3 of ITU-T Recommendation [G.997.1]. - 2.8
UPBOKLERPb unsignedInt(0:1280,2047)[] R Comma-separated list of unsigned integers (0 to 1280, or 2047). VTU-R estimated upstream power back-off electrical length per band. This parameter is a vector of UPBO electrical length per-band estimates for each supported downstream band, expressed in 0.1 dB at 1 MHz (kl0) calculated by the VTU-R, based on separate measurements in the supported downstream bands. The value of each list element ranges from 0 to 128 dB in steps of 0.1 dB, with special value 204.7 which indicates that the estimate is greater than 128 dB. This parameter is required for the alternative electrical length estimation method (ELE-M1). The value of each list element is coded as an unsigned 16 bit number in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Note: This parameter is defined as UPBOKLE-R-pb in Clause 7.5.1.23.4 of ITU-T Recommendation [G.997.1]. - 2.8
RXTHRSHds int(-640:0) R UPBO downstream receiver signal level threshold. This parameter reports the downstream received signal level threshold value used in the alternative electrical length estimation method (ELE-M1). This parameter represents an offset from -100 dBm/Hz, and ranges from -64 dB to 0 dB in steps of 0.1 dB. The value is coded as a 16 bit number in the range -64 (coded as -640) to 0 dB (coded as 0) in steps of 0.1 dB. Note: See ITU-T Recommendation [G.997.1]. - 2.8
ACTRAMODEds unsignedInt(1:4) R This parameter indicates the actual active rate adaptation mode in the downstream direction.
  • If ACTRAMODEds equals 1, the link is operating in RA-MODE 1 (MANUAL).
  • If ACTRAMODEds equals 2, the link is operating in RA-MODE 2 (AT_INIT).
  • If ACTRAMODEds equals 3, the link is operating in RA-MODE 3 (DYNAMIC).
  • If ACTRAMODEds equals 4, the link is operating in RA-MODE 4 (DYNAMIC with SOS). Note: This parameter is defined as ACT-RA-MODEds in Clause 7.5.1.33.1 of ITU-T Recommendation [G.997.1].
- 2.8
ACTRAMODEus unsignedInt(1:4) R This parameter indicates the actual active rate adaptation mode in the upstream direction.
  • If ACTRAMODEus equals 1, the link is operating in RA-MODE 1 (MANUAL).
  • If ACTRAMODEus equals 2, the link is operating in RA-MODE 2 (AT_INIT).
  • If ACTRAMODEus equals 3, the link is operating in RA-MODE 3 (DYNAMIC).
  • If ACTRAMODEus equals 4, the link is operating in RA-MODE 4 (DYNAMIC with SOS). Note: This parameter is defined as ACT-RA-MODEus in Clause 7.5.1.33.2 of ITU-T Recommendation [G.997.1].
- 2.8
ACTINPROCds unsignedInt R This parameter reports the actual impulse noise protection (INP) of the robust overhead channel (ROC) in the downstream direction. The format and usage is identical to the channel status parameter Channel.{i}.ACTINP. Note: This parameter is defined as ACTINP-ROC-ds in Clause 7.5.1.34.1 of ITU-T Recommendation [G.997.1]. - 2.8
ACTINPROCus unsignedInt R This parameter reports the actual impulse noise protection (INP) of the robust overhead channel (ROC) in the upstream direction. The format and usage is identical to the channel status parameter Channel.{i}.ACTINP. Note: This parameter is defined as ACTINP-ROC-us in Clause 7.5.1.34.2 ITU-T Recommendation [G.997.1]. - 2.8
SNRMROCds unsignedInt R This parameter reports the actual signal-to-noise margin of the robust overhead channel (ROC) in the downstream direction (expressed in 0.1 dB). The format is identical to the format of the line status parameter SNRM margin DownstreamNoiseMargin. Note: This parameter is defined as SNRM-ROC-ds in Clause 7.5.1.35.1 ITU-T Recommendation [G.997.1]. - 2.8
SNRMROCus unsignedInt R This parameter reports the actual signal-to-noise margin of the robust overhead channel (ROC) in the upstream direction (expressed in 0.1 dB). The format is identical to the format of the line status parameter SNRM margin (UpstreamNoiseMargin). Note: This parameter is defined as SNRM-ROC-us in Clause 7.5.1.35.2 ITU-T Recommendation [G.997.1]. - 2.8
LastStateTransmittedDownstream unsignedInt R This parameter represents the last successful transmitted initialization state in the downstream direction in the last full initialization performed on the line. Initialization states are defined in the individual xDSL Recommendations and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime. This parameter needs to be interpreted along with the xDSL Transmission System. This parameter is available only when, after a failed full initialization, the line diagnostics procedures are activated on the line. Note: See ITU-T Recommendation [G.997.1]. - 2.0
LastStateTransmittedUpstream unsignedInt R This parameter represents the last successful transmitted initialization state in the upstream direction in the last full initialization performed on the line. Initialization states are defined in the individual xDSL Recommendations and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime. This parameter needs to be interpreted along with the xDSL Transmission System. This parameter is available only when, after a failed full initialization, the line diagnostics procedures are activated on the line. Note: See ITU-T Recommendation [G.997.1]. - 2.0
UPBOKLE unsignedInt(0:1280) R This parameter contains the estimated electrical loop length expressed in 0.1dB at 1MHz (see O-UPDATE in section 12.2.4.2.1.2/G.993.2). The value SHALL be coded as an unsigned 16 bit number in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Note: See ITU-T Recommendation [G.997.1]. - 2.0
MREFPSDds base64(0:145) R This parameter SHALL contain the set of breakpoints exchanged in the MREFPSDds fields of the O-PRM message of G.993.2. Base64 encoded of the binary representation defined in Table 12-19/G.993.2 (maximum length is 145 octets, which requires 196 bytes for Base64 encoding). Note: See ITU-T Recommendation [G.997.1]. - 2.0
MREFPSDus base64(0:145) R This parameter SHALL contain the set of breakpoints exchanged in the MREFPSDus fields of the R-PRM message of G.993.2. Base64 encoded of the binary representation defined in Table 12-19/G.993.2 (maximum length is 145 octets, which requires 196 bytes for Base64 encoding). Note: See ITU-T Recommendation [G.997.1]. - 2.0
LIMITMASK unsignedInt R Indicates the enabled VDSL2 Limit PSD mask of the selected PSD mask class. Bit mask as specified in ITU-T Recommendation G.997.1. Note: For a VDSL2-capable multimode device operating in a mode other than VDSL2, the value of this parameter SHOULD be set to 0. Note: See ITU-T Recommendation [G.997.1]. - 2.0
US0MASK unsignedInt R Indicates the allowed VDSL2 US0 PSD masks for Annex A operation. Bit mask as specified in see ITU-T Recommendation G.997.1. Note: For a VDSL2-capable multimode device operating in a mode other than VDSL2, the value of this parameter SHOULD be set to 0. Note: See ITU-T Recommendation [G.997.1]. - 2.0
TRELLISds int R Reports whether trellis coding is enabled in the downstream direction. A value of 1 indicates that trellis coding is in use, and a value of 0 indicates that the trellis is disabled. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. - 2.0
TRELLISus int R Reports whether trellis coding is enabled in the upstream direction. A value of 1 indicates that trellis coding is in use, and a value of 0 indicates that the trellis is disabled. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. - 2.0
ACTSNRMODEds unsignedInt R Reports whether the OPTIONAL virtual noise mechanism is in use in the downstream direction. A value of 1 indicates the virtual noise mechanism is not in use, and a value of 2 indicates the virtual noise mechanism is in use. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
ACTSNRMODEus unsignedInt R Reports whether the OPTIONAL virtual noise mechanism is in use in the upstream direction. A value of 1 indicates the virtual noise mechanism is not in use, and a value of 2 indicates the virtual noise mechanism is in use. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
VirtualNoisePSDds base64(0:97) R Reports the virtual noise PSD for the downstream direction. Base64 encoded of the binary representation defined in G.997.1 by the parameter called TXREFVNds (maximum length is 97 octets, which requires 132 bytes for Base64 encoding). See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to an empty string. - 2.0
VirtualNoisePSDus base64(0:49) R Reports the virtual noise PSD for the upstream direction. Base64 encoded of the binary representation defined in G.997.1by the parameter called TXREFVNus (maximum length is 49 octets, which requires 68 bytes for Base64 encoding). See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to an empty string. - 2.0
ACTUALCE unsignedInt R Reports the actual cyclic extension, as the value of m, in use for the connection. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 99. - 2.0
LineNumber int(1:) R Signifies the line pair that the modem is using to connection. LineNumber = 1 is the innermost pair. - 2.0
UpstreamMaxBitRate unsignedInt R

The current maximum attainable data rate upstream (expressed in Kbps). Note: This parameter is related to the G.997.1 parameter ATTNDRus, which is measured in bits/s. See ITU-T Recommendation [G.997.1].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DownstreamMaxBitRate unsignedInt R

The current maximum attainable data rate downstream (expressed in Kbps). Note: This parameter is related to the G.997.1 parameter ATTNDRds, which is measured in bits/s. See ITU-T Recommendation [G.997.1].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UpstreamNoiseMargin int R

The current signal-to-noise ratio margin (expressed in 0.1dB) in the upstream direction. Note: In G.997.1, this parameter is called SNRMus. See ITU-T Recommendation [G.997.1].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DownstreamNoiseMargin int R

The current signal-to-noise ratio margin (expressed in 0.1dB) in the downstream direction. Note: In G.997.1, this parameter is called SNRMds. See ITU-T Recommendation [G.997.1].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SNRMpbus string[](:24) R Comma-separated list (maximum number of characters 24) of strings. Indicates the current signal-to-noise ratio margin of each upstream band. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. - 2.0
SNRMpbds string[](:24) R Comma-separated list (maximum number of characters 24) of strings. Indicates the current signal-to-noise ratio margin of each band. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. - 2.0
INMIATOds unsignedInt(3:511) R The Impulse Noise Monitoring (INM) Inter Arrival Time (IAT) Offset, measured in DMT symbols, that the xTU receiver uses to determine in which bin of the IAT histogram the IAT is reported. Note: In G.997.1, this parameter is called INMIATO. See ITU-T Recommendation [G.997.1]. - 2.0
INMIATSds unsignedInt(0:7) R The Impulse Noise Monitoring (INM) Inter Arrival Time (IAT) Step that the xTU receiver uses to determine in which bin of the IAT histogram the IAT is reported. Note: In G.997.1, this parameter is called INMIATS. See ITU-T Recommendation [G.997.1]. - 2.0
INMCCds unsignedInt(0:64) R The Impulse Noise Monitoring (INM) Cluster Continuation value, measured in DMT symbols, that the xTU receiver uses in the cluster indication process. Note: In G.997.1, this parameter is called INMCC. See ITU-T Recommendation [G.997.1]. - 2.0
INMINPEQMODEds unsignedInt(0:3) R The Impulse Noise Monitoring (INM) Equivalent Impulse Noise Protection (INP) Mode that the xTU receiver uses in the computation of the Equivalent INP. Note: In G.997.1, this parameter is called INM_INPEQ_MODE. See ITU-T Recommendation [G.997.1]. - 2.0
UpstreamAttenuation int R

The current upstream signal loss (expressed in 0.1dB). Doesn’t apply to VDSL2 [G.993.2]. Otherwise has the same value as the single element of TestParams.SATNus.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DownstreamAttenuation int R

The current downstream signal loss (expressed in 0.1dB). Doesn’t apply to VDSL2 [G.993.2]. Otherwise has the same value as the single element of TestParams.SATNds.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UpstreamPower int R

The current output power at the CPE’s DSL line (expressed in 0.1dBmV).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DownstreamPower int R

The current received power at the CPE’s DSL line (expressed in 0.1dBmV).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURVendor hexBinary(4) R xTU-R vendor identifier as defined in G.994.1 and T1.413. In the case of G.994.1 this corresponds to the four-octet provider code, which MUST be represented as eight hexadecimal digits. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, it MUST have the value “00000000”. Note: In G.997.1, this parameter is called “xTU-R G.994.1 Vendor ID”. See ITU-T Recommendation [G.997.1]. - 2.0
XTURCountry hexBinary(2) R T.35 country code of the xTU-R vendor as defined in G.994.1, where the two-octet value defined in G.994.1 MUST be represented as four hexadecimal digits. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, it MUST have the value “0000”. Note: In G.997.1, this parameter is called “xTU-R G.994.1 Vendor ID”. See ITU-T Recommendation [G.997.1]. - 2.0
XTURANSIStd unsignedInt R xTU-R T1.413 Revision Number as defined in T1.413 Issue 2. When T1.413 modulation is not in use, the parameter value SHOULD be 0. - 2.0
XTURANSIRev unsignedInt R xTU-R Vendor Revision Number as defined in T1.413 Issue 2. When T1.413 modulation is not in use, the parameter value SHOULD be 0. - 2.0
XTUCVendor hexBinary(4) R xTU-C vendor identifier as defined in G.994.1 and T1.413. In the case of G.994.1 this corresponds to the four-octet provider code, which MUST be represented as eight hexadecimal digits. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, it MUST have the value “00000000”. - 2.0
XTUCCountry hexBinary(2) R T.35 country code of the xTU-C vendor as defined in G.994.1, where the two-octet value defined in G.994.1 MUST be represented as four hexadecimal digits. Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, it MUST have the value “0000”. - 2.0
XTUCANSIStd unsignedInt R xTU-C T1.413 Revision Number as defined in T1.413 Issue 2. When T1.413 modulation is not in use, the parameter value SHOULD be 0. - 2.0
XTUCANSIRev unsignedInt R xTU-C Vendor Revision Number as defined in T1.413 Issue 2. When T1.413 modulation is not in use, the parameter value SHOULD be 0. - 2.0
Device.DSL.Line.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
TotalStart unsignedInt R

DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of Total statistics. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: TotalStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ShowtimeStart unsignedInt R

DSL-specific statistic. The Number of seconds since the most recent DSL Showtime - the beginning of the period used for collection of Showtime statistics. Showtime is defined as successful completion of the DSL link establishment process. The Showtime statistics are those collected since the most recent establishment of the DSL link. Note: ShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LastShowtimeStart unsignedInt R

DSL-specific statistic. The Number of seconds since the second most recent DSL Showtime-the beginning of the period used for collection of LastShowtime statistics. If the CPE has not retained information about the second most recent Showtime (e.g., on reboot), the start of LastShowtime statistics MAY temporarily coincide with the start of Showtime statistics. Note: LastShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
CurrentDayStart unsignedInt R

DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of CurrentDay statistics. The CPE MAY align the beginning of each CurrentDay interval with days in the UTC time zone, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: CurrentDayStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
QuarterHourStart unsignedInt R

DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of QuarterHour statistics. The CPE MAY align the beginning of each QuarterHour interval with real-time quarter-hour intervals, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: QuarterHourStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Line.{i}.Stats.Total. object R This object contains DSL line total statistics. See [Chapter 7.2.6/G.997.1]. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
ErroredSecs unsignedInt R

Total number of errored seconds (ES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SeverelyErroredSecs unsignedInt R

Total number of severely errored seconds (SES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Line.{i}.Stats.Showtime. object R This object contains DSL line statistics accumulated since the most recent DSL Showtime. See [Chapter 7.2.6/G.997.1]. Note: The Showtime parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
ErroredSecs unsignedInt R

Number of errored seconds since the most recent DSL Showtime (ES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SeverelyErroredSecs unsignedInt R

Number of severely errored seconds since the most recent DSL Showtime (SES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Line.{i}.Stats.LastShowtime. object R This object contains DSL line statistics accumulated since the second most recent DSL Showtime. See [Chapter 7.2.6/G.997.1]. Note: The LastShowtime parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
ErroredSecs unsignedInt R

Number of errored seconds since the second most recent DSL Showtime (ES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SeverelyErroredSecs unsignedInt R

Number of severely errored seconds since the second most recent DSL Showtime (SES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Line.{i}.Stats.CurrentDay. object R This object contains DSL line statistics accumulated during the current day. See [Chapter 7.2.6/G.997.1]. Note: The CurrentDay parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
ErroredSecs unsignedInt R

Number of errored seconds since the second most recent DSL Showtime (ES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SeverelyErroredSecs unsignedInt R

Number of severely errored seconds since the second most recent DSL Showtime (SES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Line.{i}.Stats.QuarterHour. object R This object contains DSL line statistics accumulated during the current quarter hour. See [Chapter 7.2.6/G.997.1]. Note: The QuarterHour parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
ErroredSecs unsignedInt R

Number of errored seconds since the second most recent DSL Showtime (ES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SeverelyErroredSecs unsignedInt R

Number of severely errored seconds since the second most recent DSL Showtime (SES-L as defined in ITU-T Rec. [G.997.1]). Note: This parameter is OPTIONAL at the G and S/T interfaces in G.997.1 Amendment 1. If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Line.{i}.TestParams. object R This object contains the DSL line test parameters that are available during the L0 (i.e., Showtime) state. - 2.0
HLOGGds unsignedInt R

Number of sub-carriers per sub-carrier group in the downstream direction for HLOGpsds. Valid values are 1, 2, 4, 8, and 16. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
HLOGGus unsignedInt R

Number of sub-carriers per sub-carrier group in the upstream direction for HLOGpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
HLOGpsds string[](:2559) R

Comma-separated list (maximum number of characters 2559) of strings. Indicates the downstream logarithmic line characteristics per sub-carrier group. The maximum number of elements is 256 for G.992.3, and 512 for G.992.5. For G.993.2, the number of elements will depend on the value of HLOGGds but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: HLOGpsds is measured during initialization and is not updated during Showtime.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
HLOGpsus string[](:2559) R

Comma-separated list (maximum number of characters 2559) of strings. Indicates the upstream logarithmic line characteristics per sub-carrier group. The maximum number of elements is 64 for G.992.3 and G.992.5. For G.993.2, the number of elements will depend on the value of HLOGGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: HLOGpsus is measured during initialization and is not updated during Showtime.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
HLOGMTds unsignedInt R

Indicates the number of symbols over which HLOGpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
HLOGMTus unsignedInt R

Indicates the number of symbols over which HLOGpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
QLNGds unsignedInt R

Number of sub-carriers per sub-carrier group in the downstream direction for QLNpsds. Valid values are 1, 2, 4, 8, and 16. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
QLNGus unsignedInt R

Number of sub-carriers per sub-carrier group in the upstream direction for QLNpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
QLNpsds int[](:2047) R

Comma-separated list (maximum number of characters 2047) of integers. Indicates the downstream quiet line noise per subcarrier group. The maximum number of elements is 256 for G.992.3 and G.992.5. For G.993.2, the number of elements will depend on the value of QLNGds but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: QLNpsds is measured during initialization and is not updated during Showtime.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
QLNpsus string[](:2047) R

Comma-separated list (maximum number of characters 2047) of strings. Indicates the upstream quiet line noise per subcarrier group. The maximum number of elements is 64 for G.992.3 and G.992.5. For G.993.2, the number of elements will depend on the value of QLNGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: QLNpsus is measured during initialization and is not updated during Showtime.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
QLNMTds unsignedInt R

Indicates the number of symbols over which QLNpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
QLNMTus unsignedInt R

Indicates the number of symbols over which QLNpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SNRGds unsignedInt R

Number of sub-carriers per sub-carrier group in the downstream direction for SNRpsds. Valid values are 1, 2, 4, 8, and 16. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SNRGus unsignedInt R

Number of sub-carriers per sub-carrier group in the upstream direction for SNRpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SNRpsds int[](:2047) R

Comma-separated list (maximum number of characters 2047) of integers. Indicates the downstream SNR per subcarrier group. The maximum number of elements is 256 for G.992.3, and 512 for G.992.5. For G.993.2, the number of elements will depend on the value of SNRGds but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: SNRpsds is first measured during initialization and is updated during Showtime.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SNRpsus string[](:2047) R

Comma-separated list (maximum number of characters 2047) of strings. Indicates the upstream SNR per subcarrier group. The maximum number of elements is 64 for G.992.3 and G.992.5. For G.993.2, the number of elements will depend on the value of SNRGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: SNRpsus is first measured during initialization and is updated during Showtime.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SNRMTds unsignedInt R

Indicates the number of symbols over which SNRpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SNRMTus unsignedInt R

Indicates the number of symbols over which SNRpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LATNds string[](:35) R

Comma-separated list (maximum number of characters 35) of strings. Indicates the downstream line attenuation averaged across all sub-carriers in the frequency band, as computed during initialization. Number of elements is dependent on the number of downstream bands but will exceed one only for ITU-T G.993.2. Interpretation of LATNds is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LATNus string[](:35) R

Comma-separated list (maximum number of characters 35) of strings. Indicates the upstream line attenuation averaged across all sub-carriers in the frequency band, as computed during initialization. Number of elements is dependent on the number of upstream bands but will exceed one only for ITU-T G.993.2. Interpretation of LATNus is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SATNds string[](:35) R

Comma-separated list (maximum number of characters 35) of strings. Indicates the downstream signal attenuation averaged across all active sub-carriers in the frequency band, as computed during the L0 (i.e., Showtime) state. Number of elements is dependent on the number of downstream bands but will exceed one only for ITU-T G.993.2. Interpretation of SATNds is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
SATNus string[](:35) R

Comma-separated list (maximum number of characters 35) of strings. Indicates the upstream signal attenuation averaged across all active sub-carriers in the frequency band, as computed during the L0 (i.e., Showtime) state. Number of elements is dependent on the number of downstream bands but will exceed one only for ITU-T G.993.2. Interpretation of SATNus is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Line.{i}.DataGathering. object R This object models the DSL data gathering function at the VTU-R. This only applies to VDSL2. Note: see ITU-T Recommendation [G.993.2]. - 2.8
LoggingDepthR unsignedInt R This parameter is the maximum depth of the entire data gathering event buffer at the VTU-R, in number of records, where each of the records consists of 6 bytes indicating a data gathering event as defined in [G.993.2]. Note: This parameter is defined as LOGGING_DEPTH_R in Clause 7.5.3.2 of ITU-T Recommendation [G.997.1]. - 2.8
ActLoggingDepthReportingR unsignedInt R This parameter is actual logging depth that is used for reporting the VTU-R event trace buffer over the eoc channel, in number of records, where each of the records consists of 6 bytes indicating a data gathering event as defined in [G.993.2]. Note: This parameter is defined as ACT_LOGGING_DEPTH_REPORTING_R in Clause 7.5.3.4 of ITU-T Recommendation [G.997.1]. - 2.8
EventTraceBufferR string(:256) R The value MUST be the Path Name of a row in the DeviceInfo.VendorLogFile. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. This parameter identifies the log file of the the data gathering event trace buffer containing the event records that originated at the VTU-R. This indicates the table entry that represents a Vendor Log File that contains the data gathering buffer at the VTU-R in the DeviceInfo.VendorLogFile table. This data gathering buffer MAY be retrieved wia an upload RPC of the identified Vendor Log File. Note: This parameter is defined as EVENT_TRACE_BUFFER_R in Clause 7.5.3.6 of ITU-T Recommendation [G.997.1] and Clause 11.5 of ITU-T Recommendation [G.993.2]. - 2.8
Device.DSL.Channel.{i}. object(0:) R

DSL Channel table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models DSL channel(s) on top of physical DSL lines.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
Enable boolean W Enables or disables the channel. This parameter is based on ifAdminStatus from [RFC2863]. - 2.0
Status string R

The current operational state of the channel (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the channel as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the channel entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) R Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. - 2.0
LinkEncapsulationSupported string[] R

Comma-separated list of strings. List items indicate which link encapsulation standards and recommendations are supported by the Channel instance.

Each list item is an enumeration of:

  • G.992.3_Annex_K_ATM
  • G.992.3_Annex_K_PTM
  • G.993.2_Annex_K_ATM
  • G.993.2_Annex_K_PTM
  • G.994.1 (Auto)
- 2.0
LinkEncapsulationUsed string R

Indicates the link encapsulation standard that the Channel instance is using for the connection. Enumeration of:

  • G.992.3_Annex_K_ATM
  • G.992.3_Annex_K_PTM
  • G.993.2_Annex_K_ATM
  • G.993.2_Annex_K_PTM When ATM encapsulation is identified then an upper-layer ATM.Link interface MUST be used. When PTM encapsulation is identified then an upper-layer PTM.Link interface MUST be used.
- 2.0
LPATH unsignedInt(:3) R Reports the index of the latency path supporting the bearer channel. Note: See ITU-T Recommendation [Section 7.5.2.7/G.997.1]. - 2.0
INTLVDEPTH unsignedInt R Reports the interleaver depth D for the latency path indicated in LPATH. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
INTLVBLOCK int R Reports the interleaver block length in use on the latency path indicated in LPATH. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. - 2.0
ActualInterleavingDelay unsignedInt R Reports the actual delay, in milliseconds, of the latency path due to interleaving. Note: In G.997.1, this parameter is called “Actual Interleaving Delay.” See ITU-T Recommendation [G.997.1]. - 2.0
ACTINP int R Reports the actual impulse noise protection (INP) provided by the latency path indicated in LPATH. The value is the actual INP in the L0 (i.e., Showtime) state. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. - 2.0
INPREPORT boolean R Reports whether the value reported in ACTINP was computed assuming the receiver does not use erasure decoding. Valid values are 0 (computed per the formula assuming no erasure decoding) and 1 (computed by taking into account erasure decoding capabilities of receiver). Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to false. - 2.0
NFEC int R Reports the size, in octets, of the Reed-Solomon codeword in use on the latency path indicated in LPATH. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. - 2.0
RFEC int R Reports the number of redundancy bytes per Reed-Solomon codeword on the latency path indicated in LPATH. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. - 2.0
LSYMB int R Reports the number of bits per symbol assigned to the latency path indicated in LPATH. This value does not include overhead due to trellis coding. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to -1. - 2.0
UpstreamCurrRate unsignedInt R

The current physical layer aggregate data rate (expressed in Kbps) of the upstream DSL connection. Note: If the parameter is implemented but no value is available, it MUST have the value 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DownstreamCurrRate unsignedInt R

The current physical layer aggregate data rate (expressed in Kbps) of the downstream DSL connection. Note: If the parameter is implemented but no value is available, it MUST have the value 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ACTNDR unsignedInt R Actual net data rate expressed in Kbps. Independent whether retransmission is used or not in a given transmit direction:
  • In L0 state, this parameter reports the net data rate (as specified in [ITU T G.992.3], [ITU T G.992.5] or [ITU T G.993.2]) at which the bearer channel is operating.
  • In L2 state, the parameter contains the net data rate (as specified in [ITU T G.992.3], [ITU T G.992.5] or [ITU T G.993.2]) in the previous L0 state. Note: See ITU-T Recommendation [G.997.1].
- 2.8
ACTINPREIN unsignedInt(0:255) R Actual impulse noise protection against REIN, expressed in 0.1 DMT symbols. If retransmission is used in a given transmit direction, this parameter reports the actual impulse noise protection (INP) against REIN (under specific conditions detailed in [ITU T G.998.4]) on the bearer channel in the L0 state. In the L2 state, the parameter contains the INP in the previous L0 state. The value is coded in fractions of DMT symbols with a granularity of 0.1 symbols. The range is from 0 to 25.4. A special value of 25.5 indicates an ACTINP_REIN of 25.5 or higher. Note: This parameter is defined as ACTINP_REIN in Clause 7.5.2.9 of ITU-T Recommendation [G.997.1]. - 2.8
Device.DSL.Channel.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
TotalStart unsignedInt R

DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of Total statistics. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: TotalStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ShowtimeStart unsignedInt R

DSL-specific statistic. The Number of seconds since the most recent DSL Showtime - the beginning of the period used for collection of Showtime statistics. Showtime is defined as successful completion of the DSL link establishment process. The Showtime statistics are those collected since the most recent establishment of the DSL link. Note: ShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LastShowtimeStart unsignedInt R

DSL-specific statistic. The Number of seconds since the second most recent DSL Showtime-the beginning of the period used for collection of LastShowtime statistics. If the CPE has not retained information about the second most recent Showtime (e.g., on reboot), the start of LastShowtime statistics MAY temporarily coincide with the start of Showtime statistics. Note: LastShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
CurrentDayStart unsignedInt R

DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of CurrentDay statistics. The CPE MAY align the beginning of each CurrentDay interval with days in the UTC time zone, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: CurrentDayStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
QuarterHourStart unsignedInt R

DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of QuarterHour statistics. The CPE MAY align the beginning of each QuarterHour interval with real-time quarter-hour intervals, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: QuarterHourStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Channel.{i}.Stats.Total. object R This object contains DSL channel total statistics [G.997.1]. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
XTURFECErrors unsignedInt R

Total number of FEC errors detected (FEC-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCFECErrors unsignedInt R

Total number of FEC errors detected by the ATU-C (FEC-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURHECErrors unsignedInt R

Total number of HEC errors detected (HEC-P as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCHECErrors unsignedInt R

Total number of HEC errors detected by the ATU-C (HEC-PFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURCRCErrors unsignedInt R

Total number of CRC errors detected (CV-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCCRCErrors unsignedInt R

Total number of CRC errors detected by the ATU-C (CV-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Channel.{i}.Stats.Showtime. object R This object contains DSL channel statistics accumulated since the most recent DSL Showtime [G.997.1]. Note: The Showtime parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
XTURFECErrors unsignedInt R

Number of FEC errors detected since the most recent DSL Showtime (FEC-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCFECErrors unsignedInt R

Number of FEC errors detected by the ATU-C since the most recent DSL Showtime (FEC-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURHECErrors unsignedInt R

Number of HEC errors detected since the most recent DSL Showtime (HEC-P as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCHECErrors unsignedInt R

Number of HEC errors detected by the ATU-C since the most recent DSL Showtime (HEC-PFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURCRCErrors unsignedInt R

Number of CRC errors detected since the most recent DSL Showtime (CV-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCCRCErrors unsignedInt R

Number of CRC errors detected by the ATU-C since the most recent DSL Showtime (CV-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Channel.{i}.Stats.LastShowtime. object R This object contains DSL channel statistics accumulated since the second most recent DSL Showtime [G.997.1]. Note: The LastShowtime parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
XTURFECErrors unsignedInt R

Number of FEC errors detected since the second most recent DSL Showtime (FEC-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCFECErrors unsignedInt R

Number of FEC errors detected by the ATU-C since the second most recent DSL Showtime (FEC-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURHECErrors unsignedInt R

Number of HEC errors detected since the second most recent DSL Showtime (HEC-P as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCHECErrors unsignedInt R

Number of HEC errors detected by the ATU-C since the second most recent DSL Showtime (HEC-PFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURCRCErrors unsignedInt R

Number of CRC errors detected since the second most recent DSL Showtime (CV-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCCRCErrors unsignedInt R

Number of CRC errors detected by the ATU-C since the second most recent DSL Showtime (CV-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Channel.{i}.Stats.CurrentDay. object R This object contains DSL channel statistics accumulated during the current day [G.997.1]. Note: The CurrentDay parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
XTURFECErrors unsignedInt R

Number of FEC errors detected since the second most recent DSL Showtime (FEC-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCFECErrors unsignedInt R

Number of FEC errors detected by the ATU-C since the second most recent DSL Showtime (FEC-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURHECErrors unsignedInt R

Number of HEC errors detected since the second most recent DSL Showtime (HEC-P as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCHECErrors unsignedInt R

Number of HEC errors detected by the ATU-C since the second most recent DSL Showtime (HEC-PFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURCRCErrors unsignedInt R

Number of CRC errors detected since the second most recent DSL Showtime (CV-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCCRCErrors unsignedInt R

Number of CRC errors detected by the ATU-C since the second most recent DSL Showtime (CV-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.Channel.{i}.Stats.QuarterHour. object R This object contains DSL channel statistics accumulated during the current quarter hour [G.997.1]. Note: The QuarterHour parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
XTURFECErrors unsignedInt R

Number of FEC errors detected since the second most recent DSL Showtime (FEC-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCFECErrors unsignedInt R

Number of FEC errors detected by the ATU-C since the second most recent DSL Showtime (FEC-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURHECErrors unsignedInt R

Number of HEC errors detected since the second most recent DSL Showtime (HEC-P as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCHECErrors unsignedInt R

Number of HEC errors detected by the ATU-C since the second most recent DSL Showtime (HEC-PFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTURCRCErrors unsignedInt R

Number of CRC errors detected since the second most recent DSL Showtime (CV-C as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
XTUCCRCErrors unsignedInt R

Number of CRC errors detected by the ATU-C since the second most recent DSL Showtime (CV-CFE as defined in ITU-T Rec. [G.997.1]). Note: If the parameter is implemented but no value is available, its value MUST be 4294967295 (the maximum for its data type).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.BondingGroup.{i}. object(0:) R

DSL bonding group table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each instance is a bonding group, and is expected to be stacked above a DSL.Channel instance or a FAST.Line instance for each bonded channel in the group. Many of the parameters within this object, including LowerLayers, are read-only because bonding is not expected to be configured by a Controller. The DSL bonding data model is closely aligned with [TR-159]. Corresponds to [TR-159] oBondingGroup.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name, or with a given value for GroupID.

- 2.0
Enable boolean W Enables or disables the bonding group. This parameter is based on ifAdminStatus from [RFC2863]. - 2.0
Status string R

The current operational state of the bonding group (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the bonding group as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the bonding group entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) R Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. LowerLayers is read-only for this object because bonding is expected to be configured by the CPE, not by the Controller. - 2.0
GroupStatus string[] R

Comma-separated list of strings. Indicates the current fault status of the DSL bonding group. Each list item is an enumeration of:

  • NoPeer (Peer physical layer is unreachable)
  • PeerPowerLoss (Local device received a “dying gasp” message (preceding a loss-of-power) from the peer device)
  • PeerBondSchemeMismatch (Operating bonding scheme of the peer port is different from the local one)
  • LowRate (Upstream or downstream data rate is at or below threshold) Corresponds to [TR-159] oBondingGroup.aGroupStatus.
- 2.0
GroupID unsignedInt R DSL bonding group ID. Corresponds to [TR-159] oBondingGroup.aGroupID. - 2.0
BondSchemesSupported string[] R

Comma-separated list of strings. Supported DSL bonding schemes. Each list item is an enumeration of:

  • ATM ([G.998.1] ATM-based bonding)
  • Ethernet ([G.998.2] Ethernet-based bonding)
  • TDIM ([G.998.3] TDIM-based bonding) Corresponds to [TR-159] oBondingGroup.aGroupBondSchemesSupported.
- 2.0
BondScheme string R The value MUST be a member of the list reported by the BondSchemesSupported parameter. Currently operating bonding scheme. Corresponds to [TR-159] aGroupOperBondScheme. - 2.0
GroupCapacity unsignedInt(1:32) R DSL bonding group capacity, i.e. the maximum number of channels that can be bonded in this group. Corresponds to [TR-159] oBondingGroup.aGroupCapacity. - 2.0
RunningTime unsignedInt R

The accumulated time in seconds for which this bonding group has been operationally up. Corresponds to [Section 11.4.2/G.998.1] Group Running Time.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
TargetUpRate unsignedInt R Desired upstream data rate in bits per second for this DSL bonding group (zero indicates best effort). Corresponds to [TR-159] oBondingGroup.aGroupTargetUpRate. - 2.0
TargetDownRate unsignedInt R Desired downstream data rate in bits per second for DSL bonding group (zero indicates best effort). Corresponds to [TR-159] oBondingGroup.aGroupTargetDownRate. - 2.0
ThreshLowUpRate unsignedInt R Threshold upstream data rate in bits per second for this DSL bonding group. GroupStatus will include LowRate whenever the upstream rate is less than this threshold. Corresponds to [TR-159] oBondingGroup.aGroupThreshLowUpRate. - 2.0
ThreshLowDownRate unsignedInt R Threshold downstream data rate in bits per second for this DSL bonding group. GroupStatus will include LowRate whenever the downstream rate is less than this threshold. Corresponds to [TR-159] oBondingGroup.aGroupThreshLowDownRate. - 2.0
UpstreamDifferentialDelayTolerance unsignedInt R The maximum upstream differential delay in milliseconds among member links in a bonding group. Corresponds to [Section 11.4.1/G.998.1] Differential Delay Tolerance. - 2.0
DownstreamDifferentialDelayTolerance unsignedInt R The maximum downstream differential delay in milliseconds among member links in a bonding group. Corresponds to [Section 11.4.1/G.998.1] Differential Delay Tolerance. - 2.0
BondedChannelNumberOfEntries unsignedInt(1:32) R The number of entries in the BondedChannel table. Corresponds to [TR-159] oBondingGroup.aGroupNumChannels. - 2.0
Device.DSL.BondingGroup.{i}.BondedChannel.{i}. object(0:) R

DSL bonded channel table. Each table entry represents a bonded channel within the bonding group, and is associated with exactly one DSL.Channel instance or one FAST.Line instance. There MUST be an instance of BondedChannel for each DSL channel or FAST line that is bonded. When a DSL.Channel or FAST.Line is no longer bonded, then the CPE MUST delete the corresponding BondedChannel instance. However, when a bonded DSL.Channel or FAST.Line becomes disabled, the channel remains bonded and so the corresponding BondedChannel instance MUST NOT be deleted.

At most one entry in this table can exist with a given value for Alias, or with a given value for Channel.

- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Channel string(:256) R The value MUST be the Path Name of a row in the DSL.Channel. or FAST.Line. tables. If the referenced object is deleted, the parameter value MUST be set to an empty string.This is the channel that is being bonded. This is read-only because bonding is expected to be configured by the CPE, not by the Controller. - 2.0
Device.DSL.BondingGroup.{i}.BondedChannel.{i}.Ethernet. object R Per-channel [G.998.2] Ethernet-based bonding parameters. This object MUST be present if, and only if, BondScheme is Ethernet. - 2.0
Device.DSL.BondingGroup.{i}.BondedChannel.{i}.Ethernet.Stats. object R Per-channel [G.998.2] Ethernet-based bonding statistics. These relate to the [G.998.2] PME (Physical Medium Entity) Aggregation Function (PAF) lower layer (per-channel) interfaces. The CPE MUST reset the Stats parameters either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
UnderflowErrorsSent unsignedInt R Number of underflow errors sent, i.e. on the transmit side of the interface. - 2.0
CRCErrorsReceived unsignedInt R Number of CRC errors received, i.e. on the receive side of the interface. - 2.0
AlignmentErrorsReceived unsignedInt R Number of alignment errors received, i.e. on the receive side of the interface. - 2.0
ShortPacketsReceived unsignedInt R Number of short packets received, i.e. on the receive side of the interface. - 2.0
LongPacketsReceived unsignedInt R Number of long packets received, i.e. on the receive side of the interface. - 2.0
OverflowErrorsReceived unsignedInt R Number of overflow errors received, i.e. on the receive side of the interface. - 2.0
PauseFramesReceived unsignedInt R Number of pause frames received, i.e. on the receive side of the interface. - 2.0
FramesDropped unsignedInt R Number of frames dropped, e.g. because the receive queue is full. - 2.0
Device.DSL.BondingGroup.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
TotalStart unsignedInt R

DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of Total statistics. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: TotalStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
CurrentDayStart unsignedInt R

DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of CurrentDay statistics. The CPE MAY align the beginning of each CurrentDay interval with days in the UTC time zone, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: CurrentDayStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
QuarterHourStart unsignedInt R

DSL-specific statistic. The Number of seconds since the beginning of the period used for collection of QuarterHour statistics. The CPE MAY align the beginning of each QuarterHour interval with real-time quarter-hour intervals, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: QuarterHourStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.DSL.BondingGroup.{i}.Stats.Total. object R Total statistics for this bonding group. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
FailureReasons string[] R

Comma-separated list of strings. Indicates the failure conditions that have occurred during the accumulation period. Each list item is an enumeration of:

  • LowRate (Minimum data rate not met)
  • ExcessiveDelay (Differential delay tolerance exceeded)
  • InsufficientBuffers (Insufficient buffers on receiver)
  • Other (Other failure occurred) Corresponds to [Section 11.4.3/G.998.1] Current Group Failure Reason.
- 2.0
UpstreamRate unsignedInt R The achieved upstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. - 2.0
DownstreamRate unsignedInt R The achieved downstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. - 2.0
UpstreamPacketLoss unsignedInt R The total number of upstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. - 2.0
DownstreamPacketLoss unsignedInt R The total number of downstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. - 2.0
UpstreamDifferentialDelay unsignedInt R The achieved upstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). - 2.0
DownstreamDifferentialDelay unsignedInt R The achieved downstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). - 2.0
FailureCount unsignedInt R The number of times that the group was declared Unavailable during the accumulation period. Corresponds to [Section 11.4.3/G.998.1] Group Failure Count. - 2.0
ErroredSeconds unsignedInt R The time in seconds during which the group was declared Errored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**ES. - 2.0
SeverelyErroredSeconds unsignedInt R The time in seconds during which the group was declared SeverelyErrored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**SES. - 2.0
UnavailableSeconds unsignedInt R The time in seconds during which the group was declared Unavailable during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**UAS. - 2.0
Device.DSL.BondingGroup.{i}.Stats.CurrentDay. object R Current day statistics for this bonding group. Note: The CurrentDay parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
FailureReasons string[] R

Comma-separated list of strings. Indicates the failure conditions that have occurred during the accumulation period. Each list item is an enumeration of:

  • LowRate (Minimum data rate not met)
  • ExcessiveDelay (Differential delay tolerance exceeded)
  • InsufficientBuffers (Insufficient buffers on receiver)
  • Other (Other failure occurred) Corresponds to [Section 11.4.3/G.998.1] Current Group Failure Reason.
- 2.0
UpstreamRate unsignedInt R The achieved upstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. - 2.0
DownstreamRate unsignedInt R The achieved downstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. - 2.0
UpstreamPacketLoss unsignedInt R The total number of upstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. - 2.0
DownstreamPacketLoss unsignedInt R The total number of downstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. - 2.0
UpstreamDifferentialDelay unsignedInt R The achieved upstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). - 2.0
DownstreamDifferentialDelay unsignedInt R The achieved downstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). - 2.0
FailureCount unsignedInt R The number of times that the group was declared Unavailable during the accumulation period. Corresponds to [Section 11.4.3/G.998.1] Group Failure Count. - 2.0
ErroredSeconds unsignedInt R The time in seconds during which the group was declared Errored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**ES. - 2.0
SeverelyErroredSeconds unsignedInt R The time in seconds during which the group was declared SeverelyErrored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**SES. - 2.0
UnavailableSeconds unsignedInt R The time in seconds during which the group was declared Unavailable during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**UAS. - 2.0
Device.DSL.BondingGroup.{i}.Stats.QuarterHour. object R Current quarter hour statistics for this bonding group. Note: The QuarterHour parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.0
FailureReasons string[] R

Comma-separated list of strings. Indicates the failure conditions that have occurred during the accumulation period. Each list item is an enumeration of:

  • LowRate (Minimum data rate not met)
  • ExcessiveDelay (Differential delay tolerance exceeded)
  • InsufficientBuffers (Insufficient buffers on receiver)
  • Other (Other failure occurred) Corresponds to [Section 11.4.3/G.998.1] Current Group Failure Reason.
- 2.0
UpstreamRate unsignedInt R The achieved upstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. - 2.0
DownstreamRate unsignedInt R The achieved downstream data rate in bits per second (which might change subject to dynamic link usage conditions). Corresponds to [Section 11.4.2/G.998.1] Achieved Aggregate Data Rate. - 2.0
UpstreamPacketLoss unsignedInt R The total number of upstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. - 2.0
DownstreamPacketLoss unsignedInt R The total number of downstream packets that were lost at aggregation output from a bonding group during the accumulation period. Corresponds to [Section 11.4.2/G.998.1] Group Rx Cell Loss Count. - 2.0
UpstreamDifferentialDelay unsignedInt R The achieved upstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). - 2.0
DownstreamDifferentialDelay unsignedInt R The achieved downstream differential delay in milliseconds (which might change subject to dynamic link usage conditions). - 2.0
FailureCount unsignedInt R The number of times that the group was declared Unavailable during the accumulation period. Corresponds to [Section 11.4.3/G.998.1] Group Failure Count. - 2.0
ErroredSeconds unsignedInt R The time in seconds during which the group was declared Errored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**ES. - 2.0
SeverelyErroredSeconds unsignedInt R The time in seconds during which the group was declared SeverelyErrored during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**SES. - 2.0
UnavailableSeconds unsignedInt R The time in seconds during which the group was declared Unavailable during the accumulation period. Corresponds to [TR-159] oBondingGroup.aGroupPerf**UAS. - 2.0
Device.DSL.BondingGroup.{i}.Ethernet. object(0:1) R

Ethernet-based bonding parameters [G.998.2]. This object MUST be present if, and only if, BondScheme is Ethernet.

This object is a member of a union, i.e., it is a member of a group of objects of which only one can exist at a given time.

- 2.0
Device.DSL.BondingGroup.{i}.Ethernet.Stats. object R [G.998.2] Ethernet-based bonding statistics. These relate to the [G.998.2] PME (Physical Medium Entity) Aggregation Function (PAF) and to its upper layer interface. PAF lower layer interface statistics are in the BondedChannel.{i}.Ethernet.Stats objects. The CPE MUST reset the Stats parameters either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
PAFErrors unsignedInt R Number of PAF errors. Corresponds to [TR-159] oBondETH.aEthRxErrors. - 2.0
PAFSmallFragments unsignedInt R Number of PAF Small Fragment events. Corresponds to [TR-159] oBondETH.aEthRxSmallFragments. - 2.0
PAFLargeFragments unsignedInt R Number of PAF Large Fragment events. Corresponds to [TR-159] oBondETH.aEthRxLargeFragments. - 2.0
PAFBadFragments unsignedInt R Number of PAF Bad Fragment events. Corresponds to [TR-159] oBondETH.aEthRxBadFragments. - 2.0
PAFLostFragments unsignedInt R Number of PAF Lost Fragment events. Corresponds to [TR-159] oBondETH.aEthRxLostFragments. - 2.0
PAFLateFragments unsignedInt R Number of PAF Late Fragment events. - 2.0
PAFLostStarts unsignedInt R Number of PAF Lost Start events. Corresponds to [TR-159] oBondETH.aEthRxLostStarts. - 2.0
PAFLostEnds unsignedInt R Number of PAF Lost End events. Corresponds to [TR-159] oBondETH.aEthRxLostEnds. - 2.0
PAFOverflows unsignedInt R Number of PAF Overflow events. Corresponds to [TR-159] oBondETH.aEthRxOverflows. - 2.0
PauseFramesSent unsignedInt R Number of pause frames sent, i.e. on the transmit side of the interface. - 2.0
CRCErrorsReceived unsignedInt R Number of CRC errors received, i.e. on the receive side of the interface. - 2.0
AlignmentErrorsReceived unsignedInt R Number of alignment errors received, i.e. on the receive side of the interface. - 2.0
ShortPacketsReceived unsignedInt R Number of short packets received, i.e. on the receive side of the interface. - 2.0
LongPacketsReceived unsignedInt R Number of long packets received, i.e. on the receive side of the interface. - 2.0
OverflowErrorsReceived unsignedInt R Number of overflow errors received, i.e. on the receive side of the interface. - 2.0
FramesDropped unsignedInt R Number of frames dropped, e.g. because the receive queue is full. - 2.0
Device.DSL.Diagnostics. object R The DSL Diagnostics object. - 2.0
ADSLLineTest() command - [ASYNC] This command is to provide diagnostic information for a CPE with an ADSL2 or ADSL2+ modem WAN interface, but MAY also be used for ADSL. - 2.12
⇒ Input. arguments - Input arguments. -
Interface string(:256) W [MANDATORY] The value MUST be the Path Name of a row in the DSL.Channel. table. This is the interface over which the test is to be performed. - 2.0
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL)
  • Error_Internal
  • Error_Other If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
ACTPSDds int R Downstream actual power spectral density. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. - 2.0
ACTPSDus int R Upstream actual power spectral density. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. - 2.0
ACTATPds int R Downstream actual aggregate transmitter power. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. - 2.0
ACTATPus int R Upstream actual aggregate transmitter power. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. - 2.0
HLINSCds int R Downstream linear representation scale. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
HLINSCus int R Scaling used to represent the upstream linear channel characteristics. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
HLINGds unsignedInt R Number of sub-carriers per sub-carrier group in the downstream direction for HLINpsds. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. - 2.0
HLINGus unsignedInt R Number of sub-carriers per sub-carrier group in the downstream direction for HLINpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. - 2.0
HLOGGds unsignedInt R Number of sub-carriers per sub-carrier group in the downstream direction for HLOGpsds. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. - 2.0
HLOGGus unsignedInt R Number of sub-carriers per sub-carrier group in the upstream direction for HLOGpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. - 2.0
HLOGpsds string[](:2559) R Comma-separated list (maximum number of characters 2559) of strings. List items represent downstream logarithmic channel characteristics per sub-carrier group. The maximum number of elements is 256 for G.992.3, and 512 for G.992.5. For G.993.2, the number of elements will depend on the value of HLOGGds but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: HLOGpsds is measured during initialization and is not updated during Showtime. - 2.0
HLOGpsus string[](:2559) R Comma-separated list (maximum number of characters 2559) of strings. List items represent upstream logarithmic channel characteristics per sub-carrier group. The maximum number of elements is 64 for G.992.3 and G.992.5. For G.993.2, the number of elements will depend on the value of HLOGGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. Note: HLOGpsus is measured during initialization and is not updated during Showtime. - 2.0
HLOGMTds unsignedInt R Indicates the number of symbols over which HLOGpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
HLOGMTus unsignedInt R Indicates the number of symbols over which HLOGpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
LATNpbds string[](:24) R Comma-separated list (maximum number of characters 24) of strings. List items represent downstream line attenuation per usable band, as computed during initialization. Number of elements is dependent on the number of downstream bands but will exceed one only for G.993.2. Interpretation of LATNpbds is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. - 2.0
LATNpbus string[](:24) R Comma-separated list (maximum number of characters 24) of strings. List items represent upstream line attenuation per usable band, as computed during initialization. Number of elements is dependent on the number of upstream bands but will exceed one only for G.993.2. Interpretation of LATNpbus is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. - 2.0
SATNds string[](:24) R Comma-separated list (maximum number of characters 24) of strings. List items represent downstream signal attenuation per usable band, as computed during the L0 (i.e., Showtime) state. Number of elements is dependent on the number of downstream bands but will exceed one only for G.993.2. Interpretation of SATNds is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. - 2.0
SATNus string[](:24) R Comma-separated list (maximum number of characters 24) of strings. List items represent upstream signal attenuation per usable band, as computed during the L0 (i.e., Showtime) state. Number of elements is dependent on the number of downstream bands but will exceed one only for G.993.2. Interpretation of SATNus is as defined in ITU-T Rec. G.997.1. Note: See ITU-T Recommendation [G.997.1]. - 2.0
HLINpsds int[](:61430) R Comma-separated list (maximum number of characters 61430) of integers. List items represent downstream linear channel characteristics per subcarrier group. Maximum number of complex pairs is 256 for G.992.3, and 512 for G.992.5. For G.993.2, the number of pairs will depend on the value of HLINGds but will not exceed 512. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: HLIN is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. - 2.0
HLINpsus string[](:61430) R Comma-separated list (maximum number of characters 61430) of strings. List items represent upstream linear channel characteristics per sub-carrier group. Maximum number of complex pairs is 64 for G.992.3, and G.992.5. For G.993.2, the number of pairs will depend on the value of HLINGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: HLIN is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. - 2.0
QLNGds unsignedInt R Number of sub-carriers per sub-carrier group in the downstream direction for QLNpsds. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. - 2.0
QLNGus unsignedInt R Number of sub-carriers per sub-carrier group in the upstream direction for QLNpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. - 2.0
QLNpsds int[](:61430) R Comma-separated list (maximum number of characters 61430) of integers. List items represent downstream quiet line noise per subcarrier group. Maximum number of elements is 256 for G.992.3, 512 for G.992.5. For G.993.2, the number of elements will depend on the value of QLNGds but will not exceed 512. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: QLN is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. - 2.0
QLNpsus string[](:61430) R Comma-separated list (maximum number of characters 61430) of strings. List items represent upstream quiet line noise per subcarrier group. The maximum number of elements is 64 for G.992.3, and G.992.5. For G.993.2, the number of elements will depend on the value of QLNGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: QLN is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. - 2.0
QLNMTds unsignedInt R Indicates the number of symbols over which QLNpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
QLNMTus unsignedInt R Indicates the number of symbols over which QLNpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
SNRGds unsignedInt R Number of sub-carriers per sub-carrier group in the downstream direction for SNRpsds. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. - 2.0
SNRGus unsignedInt R Number of sub-carriers per sub-carrier group in the upstream direction for SNRpsus. Valid values are 1, 2, 4, and 8. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 1. - 2.0
SNRpsds int[](:61430) R Comma-separated list (maximum number of characters 61430) of integers. List items represent downstream SNR per subcarrier group. Maximum number of elements is 256 for G.992.3, 512 for G.992.5. For G.993.2, the number of elements will depend on the value of SNRGds but will not exceed 512. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Interpretation of the value is as defined in ITU-T Rec. G.997.1. Note: SNRps is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. - 2.0
SNRpsus string[](:61430) R Comma-separated list (maximum number of characters 61430) of strings. List items represent upstream SNR per subcarrier group. The maximum number of elements is 64 for G.992.3, and G.992.5. For G.993.2, the number of elements will depend on the value of SNRGus but will not exceed 512. Interpretation of the values is as defined in ITU-T Rec. G.997.1. Note: SNRps is not applicable in PLOAM for G.992.1 or G.992.2. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to None. - 2.0
SNRMTds unsignedInt R Indicates the number of symbols over which SNRpsds was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
SNRMTus unsignedInt R Indicates the number of symbols over which SNRpsus was measured. Note: See ITU-T Recommendation [G.997.1]. For a multimode device operating in a mode in which this parameter does not apply, the value of this parameter SHOULD be set to 0. - 2.0
BITSpsds int[](:61430) R Comma-separated list (maximum number of characters 61430) of integers. List items represent downstream bit allocation per subcarrier group. Maximum number of elements is 256 for G.992.3, 512 for G.992.5. Interpretation of the value is as defined in ITU-T Rec. [G.997.1]. - 2.0
BITSpsus string[](:61430) R Comma-separated list (maximum number of characters 61430) of strings. List items represent upstream bit allocation per subcarrier group. Maximum number of elements is 256 for G.992.3, 512 for G.992.5. Interpretation of the value is as defined in ITU-T Rec. [G.997.1]. - 2.0
SELTUER() command - [ASYNC] This command performs a DSL Single Ended Line Test - Physical Medium Dependent (SELT-PMD) Uncalibrated Echo Response (UER). This command is for the CPE, aka the Transmission Unit - Remote end (TU-R). Reference: ITU-T Recommendation [Clause A.2, SELT-PMD management entity/G.996.2]. - 2.13
⇒ Input. arguments - Input arguments. -
Interface string(:256) W The value MUST be the Path Name of a row in the DSL.Line. table. This is the interface over which the test is to be performed. - 2.13
UERMaxMeasurementDuration unsignedInt(5:240) W This parameter is the SELT UER maximum measurement duration (MMD) measured in seconds. This parameter is defined as SELT_UER_MMD_R in ITU-T Recommendation [Clause A.2.1.1/G.996.2]. - 2.13
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL) If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
ExtendedBandwidthOperation boolean R This parameter indicates if the option for extended bandwidth SELT is applied (true) or not applied (false). If the option for extended bandwidth SELT is applied to UER, then UERGroupSize has three valid values: 1, 2 and 12. If the option for extended bandwidth SELT is not applied to UER, then UERGroupSize has two valid values: 1 and 2. UERGroupSize is reported if the option for extended bandwidth UER SELT is supported; otherwise, reporting of the group size is optional. - 2.13
UER int[2:2][1:4096] R The Uncalibrated Echo Response (UER) [a(0),b(0)], [a(1),b(1)], … Comma-separated list (1 to 4096 items) of UERComplexs, with each list item consisting of the following. [UERComplex] Pair of 32-bit signed integers a(i),b(i) with each pair representing a complex component of the uncalibrated echo response (UER);
  1. Real UER component, a(i)
  2. Imaginary UER component, b(i) for values of i starting at i=0. Both values are represented as signed integers. The interpretation of the UER value is as defined in [Clause A.2.2.1/G.996.2]. The value of UER at frequency i*UERGroupSizeDf = (UERScaleFactor/(2^31))(a(i)+j*b(i))/(2^31) where Df = 4.3125 kHz. This parameter is defined as CPE SELT uncalibrated echo response (SELT-UER-R) in ITU-T Recommendation [Clause A.2.2.1/G.996.2].
- 2.13
UERScaleFactor unsignedInt R The Uncalibrated Echo Response (UER) scale factor. This parameter is defined as part of the CPE SELT uncalibrated echo response (SELT-UER-R) in ITU-T Recommendation [Clause A.2.2.1/G.996.2]. Note that the scale factor is chosen such that max(abs(a(i)), abs(b(i))) over all i is equal to 2^31 - 1, which doesn’t allow UERScaleFactor to be zero. - 2.13
UERGroupSize unsignedInt(1:2,12) R The Uncalibrated Echo Response (UER) group size, UER_G. In units of subcarriers. This parameter is defined as part of the CPE SELT uncalibrated echo response (SELT-UER-R) in ITU-T Recommendation [Clause A.2.2.2/G.996.2]. - 2.13
UERVar int[0:4096] R Comma-separated list (0 to 4096 items) of integers. This parameter represents the variance of the UER. List items represent v(i), for values of i starting at i=0. The variance of the uncalibrated echo response for frequency i*UERGroupSizeDf is VAR(iUERGroupSize*Df) = 3 - v(i)/2 dB where Df = 4.3125 kHz. This parameter is defined as SELT variance of uncalibrated echo response R (SELT UER-VAR-R) in [Clause A.2.2.2/G.996.2]. - 2.13
SELTQLN() command - [ASYNC] This command performs a DSL Single Ended Line Test - Physical Medium Dependent (SELT-PMD) Quiet Line Noise (QLN). This command is for the CPE, aka the Transmission Unit - Remote end (TU-R). Reference: ITU-T Recommendation [Clause A.2, SELT-PMD management entity/G.996.2]. - 2.13
⇒ Input. arguments - Input arguments. -
Interface string(:256) W The value MUST be the Path Name of a row in the DSL.Line. table. This is the interface over which the test is to be performed. - 2.13
QLNMaxMeasurementDuration unsignedInt(1:240) W This parameter is the SELT QLN maximum measurement duration (MMD) measured in seconds. This parameter is defined as SELT_QLN_MMD_R in ITU-T Recommendation [Clause A.2.1.2/G.996.2]. - 2.13
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL) If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
ExtendedBandwidthOperation boolean R This parameter indicates if the option for extended bandwidth SELT is applied (true) or not applied (false). If the option for extended bandwidth SELT is applied to QLN, then QLNGroupSize has three valid values: 1, 2 and 12. If the option for extended bandwidth SELT is not applied to QLN, then QLNGroupSize has two valid values: 1 and 2. QLNGroupSize is reported if the option for extended bandwidth QLN SELT is supported; otherwise, reporting of the group size is optional. - 2.13
QLN int[](:61430) R Comma-separated list (maximum number of characters 61430) of integers. List items represent SELT quiet line noise (QLN) per subcarrier group. Each list element is n(i), with i starting at 0. The value of QLN at frequency i*QLNGroupSizeDf with Df=4.3125 kHz is defined as QLN(iQLNGroupSize*Df) = -23 - (n(i)/2) dBm/Hz. This data format supports a QLN granularity of 0.5 dB and an dynamic range of -150 to -23 dBm/Hz. Interpretation of the SELT_QLN_R value is defined in [Clause A.2.2.3/G.996.2]. - 2.13
QLNGroupSize unsignedInt(1:2,12) R This parameter represents the Quiet Line Noise (QLN) group size. In units of subcarriers. This parameter is defined as part of the SELT_QLN_R in ITU-T Recommendation [Clause A.2.2.4/G.996.2]. - 2.13
SELTP() command - [ASYNC] This command performs a DSL Single-Ended Line Test - Processed (SELT-P). This command is for the CPE, aka the Transmission Unit - Remote end (TU-R). Reference: ITU-T Recommendation [G.996.2]. - 2.13
⇒ Input. arguments - Input arguments. -
Interface string(:256) W The value MUST be the Path Name of a row in the DSL.Line. table. This is the interface over which the test is to be performed. - 2.13
CapacityEstimateEnabling boolean W Capacity estimate calculation enabling: This parameter is expressed as a boolean and takes the value false if xDSL performance estimation is not required, true otherwise. The capacity estimate calculation enabling parameter is defined in [Clause B.2.1.1/G.996.2]. - 2.13
CapacitySignalPSD unsignedInt[2:2][1:48] W The capacity estimate signal Power Spectral Density (PSD): Comma-separated list (1 to 48 items) of PSDBreak Point Index And Levels, with each list item consisting of the following. [PSDBreakPointIndexAndLevel] 1. the Power Spectral Density (PSD) breakpoint sub-carrier index in the range [0:49152] with Df = 4.3125 kHz frequency spacing, and
  1. the value of the level of the PSD at this sub-carrier expressed in 0.1 dBm/Hz with an offset of -200 dBm/Hz. The range of valid values for PSD is -30 to -200 dBm/Hz. Both values are represented as unsignedInt. This capacity estimate signal PSD parameter is defined in ITU-T Recommendation [Clause B.2.1.2/G.996.2].
- 2.13
CapacityNoisePSD unsignedInt[2:2][1:48] W The capacity estimate noise Power Spectral Density (PSD): Comma-separated list (1 to 48 items) of PSDBreak Point Index And Levels, with each list item consisting of the following. [PSDBreakPointIndexAndLevel] 1. the Power Spectral Density (PSD) breakpoint sub-carrier index in the range [0:49152] with Df = 4.3125 kHz frequency spacing, and
  1. the value of the level of the PSD at this sub-carrier expressed in 0.1 dBm/Hz with an offset of -200 dBm/Hz. The range of valid values for PSD is -30 to -200 dBm/Hz. Both values are represented as unsignedInt. This capacity estimate noise PSD parameter is defined in ITU-T Recommendation [Clause B.2.1.3/G.996.2].
- 2.13
CapacityTargetMargin unsignedInt(0:310) W The capacity estimate target noise margin. The range of valid values is 0 to 31 dB, in steps of 0.1 dB. This capacity estimate target noise margin parameter is defined in ITU-T Recommendation [Clause B.2.1.4/G.996.2]. - 2.13
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL) If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
LoopTermination string R

Loop termination indicator. Enumeration of:

  • Open
  • Short
  • Powered on DSLAM/DPU (This value has been removed from the ITU-T Recommendation, OBSOLETED)
  • Powered on CPE
  • Unknown This parameter is defined as LOOP-TERM in ITU-T Recommendation [Clause B.1.1.1/G.996.2].
- 2.13
LoopLength unsignedInt(0:16383) R This parameter is the loop length with units of meters. This parameter is defined as the loop length parameter LOOP_LEN in ITU-T Recommendation [Clause B.1.1.2/G.996.2]. - 2.13
LoopTopology string[](:256) R Comma-separated list (maximum number of characters 256) of strings. List items represent paired parameters [LOOP_SEG_LEN, LOOP_SEG_BTAP] representing a concatenation of loop segment types, where LOOP_SEG_LEN represents the length of the segment in meters; and LOOP_SEG_BTAP is a string that identifies the segment type as either “in series” or “bridged tap”. The first loop segment in the list shall be the segment connected to the SELT-PMD block, subsequent loop segments in the list shall describe the loop in the direction toward the far-end loop termination. This Loop Topology parameter is defined in ITU-T Recommendation [Clause B.1.1.3/G.996.2]. - 2.13
AttenuationCharacteristics unsignedInt[2:2][0:8191] R Specifies the list of attenuation characteristics. Comma-separated list (0 to 8191 items) of SELTPAttenuation Characteristics Index And TFlogs, with each list item consisting of the following. [SELTPAttenuationCharacteristicsIndexAndTFlog] 1. The paired frequency spacing index in the range [0:8191], and
  1. The transfer function log value, i.e. [i, TFlog(i * TFlogGroupSize * Df)], where the reference frequency spacing Df = 4.3125 kHz, the index i valid range is 0 to 8191, and TFlog(i * TFlogGroupSize * Df) spans a range from +6.0 dB down to -96.2 dB with units of 0.1 dB. Both values are represented as unsignedInt. TFlog(i * TFlogGroupSize * Df) is represented by an integer k, 0 <= k <= 1022, where TFlog(i * TFlogGroupSize * Df) = 6.0 - k * 0.1. The special value of k of 1023 is used to indicate that no measurement could be done for this subcarrier because the attenuation is out of the range that can be represented. The attenuation characteristics TFlog(f) parameter is defined in ITU-T Recommendation [Clause B.1.1.6/G.996.2].
- 2.13
TFlogGroupSize unsignedInt(1:2,12) R This parameter represents the Transfer Function Log (TFlog) group size. In units of subcarriers. This parameter is defined as part of the SELT attenuation characteristics, AttenuationCharacteristics, defined in ITU-T Recommendation [Clause B.1.1.6/G.996.2]. - 2.14
MissingFilter boolean R Missing micro-filter or splitter: This parameter is a binary indication of a missing or incorrectly installed splitter or micro-filter at the U-R reference point. A value of true represents a missing splitter. The missing micro-filter or splitter parameter is defined in [Clause B.1.1.4/G.996.2]. - 2.13
CapacityEstimate unsignedInt[1:2] R Capacity Estimate: Comma-separated list (1 to 2 items) of unsigned integers. This parameter represents the downstream and/or upstream capacity estimates in kbit/s. If only one value is supplied, then it’s not specified whether it’s the downstream value, the upstream value or some combination of the two. If two values are supplied, then the first is the downstream value and the second is the upstream value. The capacity estimate parameters are defined in [Clause B.1.1.7/G.996.2]. - 2.13
Device.FAST. object R This object models FAST (defined in ITU Recommendation [G.9701]) lines. Each Line models a layer 1 FAST Line interface. - 2.11
LineNumberOfEntries unsignedInt R The number of entries in the Line table. - 2.11
Device.FAST.Line.{i}. object(0:) R

FAST Line table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models physical FAST lines.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.11
Enable boolean W Enables or disables the FAST line. This parameter is based on ifAdminStatus from [RFC2863]. - 2.11
Status string R

The current operational state of the FAST line (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.11
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
Name string(:64) R

The textual name of the FAST line as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.11
LastChange unsignedInt R

The accumulated time in seconds since the FAST line entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Line is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.11
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.11
FirmwareVersion string(:64) R A string identifying the version of the modem firmware currently installed for this interface. This is applicable only when the modem firmware is separable from the overall CPE software. - 2.11
LinkStatus string R

Status of the FAST physical link. Enumeration of:

- 2.11
AllowedProfiles string[] R

Comma-separated list of strings. List items indicate which FAST profiles are allowed on the line. Each list item is an enumeration of:

  • 106a
  • 212a Note: In G.997.2, this parameter is called PROFILES. See ITU-T Recommendation [G.997.2].
- 2.11
CurrentProfile string R The value MUST be a member of the list reported by the AllowedProfiles parameter, or else be an empty string. Indicates which FAST profile is currently in use on the line. - 2.11
PowerManagementState string R

The power management state of the line. Enumeration of:

  • L0
  • L2.1
  • L2.2
  • L3 Note: See ITU-T Recommendation [G.9701].
- 2.11
SuccessFailureCause unsignedInt(0:5) R The success failure cause of the initialization. An enumeration of the following integer values:
  • 0: Successful
  • 1: Configuration error. Configuration error. This error occurs if the line cannot reach L0 state due to a mismatch of configuration and FTU capabilities.
  • 2: Configuration not feasible on the line. This error occurs if the line cannot reach the L0 state due to a mismatch of configuration of line and noise characteristics.
  • 3: Communication problem. This error occurs, for example, due to corrupted messages or bad syntax messages or if no common mode can be selected in the G.994.1 handshaking procedure or due to a timeout.
  • 4: No far-end FTU detected. This error occurs if the far-end FTU is not powered or not connected or if the line is too long to allow detection of a far-end FTU.
  • 5: Any other or unknown initialization failure cause. Note: In G.997.2, this parameter is called “Initialization success/failure cause”. See Clause 7.20.2.1 of ITU-T Recommendation [G.997.2].
- 2.11
UPBOKLER unsignedInt(0:1280) R This parameter reports the estimate of the electrical length expressed in 0.1 dB, as determined by the FTU-R (see clause 7.3.1.4.2.1/[G.9701]) and conveyed in the R-MSG1 initialization message (see clause 12.3.3.2.3/[G.9701]). The value is coded as an unsignedInt in the range 0 (coded as 0) to 128 dB (coded as 1280) in steps of 0.1 dB. Note: This parameter is defined as UPBOKLE-R in Clause 7.10.4.2 of ITU-T Recommendation [G.997.2]. - 2.11
LastTransmittedDownstreamSignal unsignedInt(0:21) R This parameter reports the downstream signal count of the last transmitted initialization signal in the last full or short initialization performed on the line. The valid values are 0..21. The downstream signal count is defined in clause 12.3.1/[G.9701]. Note: See clause 7.10.2.2 ITU-T Recommendation [G.997.2]. - 2.11
LastTransmittedUpstreamSignal unsignedInt(0:21) R This parameter reports the upstream signal count of the last transmitted initialization signal in the last full or short initialization performed on the line. The valid values are 0..21. The upstream signal count is defined in clause 12.3.1/[G.9701]. Note: See clause 7.10.2.3 ITU-T Recommendation [G.997.2]. - 2.11
UPBOKLE unsignedInt(0:1280) R This parameter reports the electrical length that would have been sent from the FTU-O to the FTU-R if the electrical length was not forced by the DPU-MIB. If the electrical length is not forced by the DPU-MIB, then this object reports the final electrical length, as determined by the FTU-O (see clause 7.3.1.4.2.1/[G.9701]) and conveyed in the O-UPDATE initialization message (see clause 12.3.3.2.4/[G.9701]). Note: See clause 7.10.4.1 in ITU-T Recommendation [G.997.2]. - 2.11
LineNumber int(1:) R Signifies the line pair that the modem is using to connection. LineNumber = 1 is the innermost pair. - 2.11
UpstreamMaxBitRate unsignedInt R

This parameter reports the attainable net data rate expressed in Kbps as defined in clause 11.4.1.1.2/[G.9701]. Note: This parameter is related to the G.997.2 parameter ATTNDRus. See clause 7.11.2.1 ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
DownstreamMaxBitRate unsignedInt R

This parameter reports the attainable net data rate expressed in Kbps as defined in clause 11.4.1.1.2/[G.9701]. Note: This parameter is related to the G.997.2 parameter ATTNDRds. See clause 7.11.2.1 ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
UpstreamNoiseMargin int R

This parameter reports the signal-to-noise ratio margin (as defined in clause 9.8.3.2/[G.9701] and 11.4.1.3/[G.9701]) in the upstream direction. A special value indicates that the signal-to-noise ratio margin is out of the range to be represented. The parameter is expressed in 0.1dB. Note: In G.997.2, this parameter is called SNRMus. See ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
DownstreamNoiseMargin int R

This parameter reports the signal-to-noise ratio margin (as defined in clause 9.8.3.2/[G.9701] and 11.4.1.3/[G.9701]) in the upstream direction. A special value indicates that the signal-to-noise ratio margin is out of the range to be represented. The parameter is expressed in 0.1dB. Note: In G.997.2, this parameter is called SNRMds. See ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
UpstreamAttenuation int R

The current upstream signal loss (expressed in 0.1dB).

Value Change Notification requests for this parameter MAY be denied.

- 2.11
DownstreamAttenuation int R

The current downstream signal loss (expressed in 0.1dB).

Value Change Notification requests for this parameter MAY be denied.

- 2.11
UpstreamPower int R

The current output power at the CPE’s FAST line (expressed in 0.1dBmV).

Value Change Notification requests for this parameter MAY be denied.

- 2.11
DownstreamPower int R

The current received power at the CPE’s FAST line (expressed in 0.1dBmV).

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SNRMRMCds int R

This parameter reports the signal-to-noise margin for the robust management channel (RMC) in the downstream direction (express in 0.1dB). A special value (-512) indicates that the signal-to-noise ratio margin for the RMC is out of the range to be represented. This parameter is defined in clauses 7.10.12.1 of ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SNRMRMCus int R

This parameter reports the signal-to-noise margin for the robust management channel (RMC) in the upstream direction (express in 0.1dB). A special value (-512) indicates that the signal-to-noise ratio margin for the RMC is out of the range to be represented. This parameter is defined in clauses 7.10.12.2 of ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
BITSRMCpsds int[](:4610) R

Comma-separated list (maximum number of characters 4610) of integers. List items report the bit allocation values on RMC sub-carriers in RMC symbols in the downstream direction. Each pair composes of a sub-carrier index from 0..4095 and an 8 bit allocation value. There are maximum 512 pairs. This parameter is defined in clause 7.10.12.3 of ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
BITSRMCpsus int[](:4610) R

Comma-separated list (maximum number of characters 4610) of integers. List items report the bit allocation values on RMC sub-carriers in RMC symbols in the upstream direction. Each pair composes of a sub-carrier index from 0..4095 and an 8 bit allocation value. There are maximum 512 pairs. This parameter is defined in clause 7.10.12.4 of ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
FEXTCANCELds boolean R This indicates whether FEXT cancellation in the downstream direction from all the other vectored lines into the line in the vectored group is enabled (TRUE) or disabled (FALSE). This parameter is defined as FEXT_TO_CANCEL_ENABLEds in clause 7.1.7.1 of ITU Recommendation [G.997.2]. - 2.11
FEXTCANCELus boolean R This indicates whether FEXT cancellation in the upstream direction from all the other vectored lines into the line in the vectored group is enabled (TRUE) or disabled (FALSE). This parameter is defined as FEXT_TO_CANCEL_ENABLEds in clause 7.1.7.1 of ITU Recommendation [G.997.2]. - 2.11
ETRds unsignedInt R

This parameter reports the expected throughput rate expressed in Kbps as defined in clause 7.11.1.2 of ITU-T Recommendation [G.997.2]

Value Change Notification requests for this parameter MAY be denied.

- 2.11
ETRus unsignedInt R

This parameter reports the expected throughput rate expressed in Kbps as defined in clause 7.11.1.2 of ITU-T Recommendation [G.997.2]

Value Change Notification requests for this parameter MAY be denied.

- 2.11
ATTETRds unsignedInt R

This parameter reports the attainable expected throughput expressed in Kbps as defined in clause 7.11.2.2 of ITU-T Recommendation [G.997.2]

Value Change Notification requests for this parameter MAY be denied.

- 2.11
ATTETRus unsignedInt R

This parameter reports the attainable expected throughput expressed in Kbps as defined in clause 7.11.2.2 of ITU-T Recommendation [G.997.2]

Value Change Notification requests for this parameter MAY be denied.

- 2.11
MINEFTR unsignedInt R

This parameter reports the minimum error free throughput value expressed in Kbps computed from power up as defined in clause 11.4.1.1.3 of ITU-T Recommendation [G.9701]

Value Change Notification requests for this parameter MAY be denied.

- 2.11
Device.FAST.Line.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.11
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
TotalStart unsignedInt R

FAST-specific statistic. The Number of seconds since the beginning of the period used for collection of Total statistics. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: TotalStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
ShowtimeStart unsignedInt R

FAST-specific statistic. The Number of seconds since the most recent DSL Showtime - the beginning of the period used for collection of Showtime statistics. Showtime is defined as successful completion of the DSL link establishment process. The Showtime statistics are those collected since the most recent establishment of the DSL link. Note: ShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LastShowtimeStart unsignedInt R

FAST-specific statistic. The Number of seconds since the second most recent DSL Showtime-the beginning of the period used for collection of LastShowtime statistics. If the CPE has not retained information about the second most recent Showtime (e.g., on reboot), the start of LastShowtime statistics MAY temporarily coincide with the start of Showtime statistics. Note: LastShowtimeStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
CurrentDayStart unsignedInt R

FAST-specific statistic. The Number of seconds since the beginning of the period used for collection of CurrentDay statistics. The CPE MAY align the beginning of each CurrentDay interval with days in the UTC time zone, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: CurrentDayStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
QuarterHourStart unsignedInt R

FAST-specific statistic. The Number of seconds since the beginning of the period used for collection of QuarterHour statistics. The CPE MAY align the beginning of each QuarterHour interval with real-time quarter-hour intervals, but is not required to do so. Statistics SHOULD continue to be accumulated across CPE reboots, though this might not always be possible. Note: QuarterHourStart SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
Device.FAST.Line.{i}.Stats.Total. object R This object contains DSL line total statistics. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.11
ErroredSecs unsignedInt R

Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SeverelyErroredSecs unsignedInt R

Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LOSS unsignedInt R

Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LORS unsignedInt R

Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
UAS unsignedInt R

Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RTXUC unsignedInt R

This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RTXTX unsignedInt R

This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessBSW unsignedInt R

This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessSRA unsignedInt R

This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessFRA unsignedInt R

This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessRPA unsignedInt R

This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessTIGA unsignedInt R

This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
Device.FAST.Line.{i}.Stats.Showtime. object R This object contains FAST line statistics since the most recent showtime. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.11
ErroredSecs unsignedInt R

Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SeverelyErroredSecs unsignedInt R

Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LOSS unsignedInt R

Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LORS unsignedInt R

Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
UAS unsignedInt R

Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RTXUC unsignedInt R

This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RTXTX unsignedInt R

This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessBSW unsignedInt R

This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessSRA unsignedInt R

This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessFRA unsignedInt R

This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessRPA unsignedInt R

This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessTIGA unsignedInt R

This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
Device.FAST.Line.{i}.Stats.LastShowtime. object R This object contains FAST line statistics since the second most recent showtime. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.11
ErroredSecs unsignedInt R

Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SeverelyErroredSecs unsignedInt R

Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LOSS unsignedInt R

Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LORS unsignedInt R

Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
UAS unsignedInt R

Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RTXUC unsignedInt R

This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RTXTX unsignedInt R

This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessBSW unsignedInt R

This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessSRA unsignedInt R

This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessFRA unsignedInt R

This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessRPA unsignedInt R

This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessTIGA unsignedInt R

This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
Device.FAST.Line.{i}.Stats.CurrentDay. object R This object contains FAST line statistics accumulated during the current day. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.11
ErroredSecs unsignedInt R

Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SeverelyErroredSecs unsignedInt R

Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LOSS unsignedInt R

Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LORS unsignedInt R

Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
UAS unsignedInt R

Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RTXUC unsignedInt R

This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RTXTX unsignedInt R

This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessBSW unsignedInt R

This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessSRA unsignedInt R

This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessFRA unsignedInt R

This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessRPA unsignedInt R

This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessTIGA unsignedInt R

This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
Device.FAST.Line.{i}.Stats.QuarterHour. object R This object contains FAST line statistics accumulated during the current quarter hour. Note: The Total parameters SHOULD NOT be reset when the interface statistics are reset via an interface disable / enable cycle. - 2.11
ErroredSecs unsignedInt R

Total number of errored seconds as defined in ITU-T Rec. [G.997.2]. An errored second (ES) is declared if, during a 1-second interval, there are one or more crc anomalies, or one or more los defects, or one or more lor defects, or one or more lpr primitives.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SeverelyErroredSecs unsignedInt R

Total number of severely errored seconds as defined in ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LOSS unsignedInt R

Total number of loss of signal seconds (LOSS) as defined in ITU-T Rec. [G.997.2]. A LOSS is declared if, during a 1-second interval, there are one or more los defects.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
LORS unsignedInt R

Total number of loss of RMC seconds (LORS) as defined in ITU-T Rec. [G.997.2]. A LORS is declared if, during a 1-second interval, there are one or more lor defects.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
UAS unsignedInt R

Total number of unavailable seconds (UAS) as defined in ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RTXUC unsignedInt R

This parameter reports a count of uncorrected DTU anomalies (rtx_uc). This parameter is defined in clause 7.8.5 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RTXTX unsignedInt R

This parameter reports a count of retransmitted DTU anomalies (rtx_tx). This parameter is defined in clause 7.8.6 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessBSW unsignedInt R

This parameter reports a count of the successful bit swap (BSW) primitives. This parameter is defined as success_BSW in clause 7.7.20 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessSRA unsignedInt R

This parameter reports a count of the successful autonomous SRA (seamless rate adaptation) primitives. This parameter is defined as success_SRA in clause 7.7.21 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessFRA unsignedInt R

This parameter reports a count of the successful FRA (fast rate adaptation) primitives. This parameter is defined as success_FRA in clause 7.7.22 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessRPA unsignedInt R

This parameter reports a count of the successful RPA (RMC parameter adjustment) primitives. This parameter is defined as success_RPA in clause 7.7.23 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SuccessTIGA unsignedInt R

This parameter reports a count of the successful TIGA (transmitter initiated gain adjustment) primitives. This parameter is defined as success_TIGA in clause 7.7.24 of ITU-T Rec. [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
Device.FAST.Line.{i}.TestParams. object R This object contains the FAST line test parameters that are available during the L0 (i.e., Showtime) state. - 2.11
SNRGds unsignedInt R

Reports the number of sub-carriers in any one sub-carrier group used to represent the downstream SNR(f) values. Valid values are 1, 2, 4, and 8. Note: In ITU-T G.9701-2014, the only valid value is G = 1. See clause 7.10.8.2 ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SNRGus unsignedInt R

Reports the number of sub-carriers in any one sub-carrier group used to represent the upstream SNR(f) values. Valid values are 1, 2, 4, and 8. Note: In ITU-T G.9701-2014, the only valid value is G = 1. See clause 7.10.8.5 ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SNRpsds int[](:2047) R

Comma-separated list (maximum number of characters 2047) of integers. Reports the downstream SNR(f) values. A special value indicates that no measurement could be done for this sub-carrier group because it is out of the downstream MEDLEY set or its transmit power is zero. The number of elements will depend on the value of SNRGds. Interpretation of the values is as defined in clause 11.4.1.2.2.of ITU-T Rec. [G.9701]. Note: See clause 7.10.8.3 of ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SNRpsus string[](:2047) R

Comma-separated list (maximum number of characters 2047) of strings. Reports the upstream SNR(f) values. A special value indicates that no measurement could be done for this sub-carrier group because it is out of the downstream MEDLEY set or its transmit power is zero. The number of elements will depend on the value of SNRGds. Interpretation of the values is as defined in clause 11.4.1.2.2.of ITU-T Rec. [G.9701]. Note: See clause 7.10.8.6 of ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SNRMTds unsignedInt R

Reports the number of symbols used to measure the downstream SNR(f) values. The valid values 0..65535. Note: See clause 7.10.8.1 of ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
SNRMTus unsignedInt R

Reports the number of symbols used to measure the upstream SNR(f) values. The valid values 0..65535. Note: See clause 7.10.8.4 of ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
ACTINP unsignedInt R

Reports the actual INP against SHINE as defined in clause 11.4.1.1.7/[G.9701]. A special value indicates an actual INP against SHINE of 2047 symbols or higher. The valid values are 0..2046 and 2047 is the special value. Note: See ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
NFEC unsignedInt R

Reports the DTU FEC codeword length (expressed in 1 byte unit) as defined in clause 9.3/[G.9701]. The valid range is 32..255. Note: See clause 7.11.4.1 ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
RFEC int R

Reports the DTU FEC codeword redundancy as defined in clause 9.3/[G.9701]. Note: See ITU-T Recommendation [G.997.2].

Value Change Notification requests for this parameter MAY be denied.

- 2.11
UpstreamCurrRate unsignedInt R

Reports the current physical layer aggregate data rate (expressed in Kbps) of the upstream FAST as defined in clause 11.4.1.1.1/[G.9701]. The current physical layer aggregate data rate (expressed in Kbps) of the upstream FAST connection. The valid values are 0..4294967295(0 to 232-1 kbit/s).

Value Change Notification requests for this parameter MAY be denied.

- 2.11
DownstreamCurrRate unsignedInt R

Reports the current physical layer aggregate data rate (expressed in Kbps) of the upstream FAST as defined in clause 11.4.1.1.1/[G.9701]. The current physical layer aggregate data rate (expressed in Kbps) of the downstream FAST connection. The valid values are 0..4294967295(0 to 232-1 kbit/s).

Value Change Notification requests for this parameter MAY be denied.

- 2.11
ACTINPREIN unsignedInt R

Reports the actual INP against REIN as defined in clause 11.4.1.1.8/[G.9701]. A special value indicates an actual INP against REIN of 63 symbols or higher. The valid range is 0..62 symbols, and 63 is the special value.

Value Change Notification requests for this parameter MAY be denied.

- 2.11
Device.Optical. object R This object models optical interface technologies. It defines an Interface object that models a layer 1 optical interface that is capable of transporting Ethernet packets. The data model definition is based on parts of [G.988]. - 2.4
InterfaceNumberOfEntries unsignedInt R The number of entries in the Interface table. - 2.4
Device.Optical.Interface.{i}. object(0:) R

Optical interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models physical optical interfaces.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.4
Enable boolean W Enables or disables the optical interface. This parameter is based on ifAdminStatus from [RFC2863]. - 2.4
Status string R

The current operational state of the optical interface (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.4
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.4
Name string(:64) R

The textual name of the optical interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.4
LastChange unsignedInt R

The accumulated time in seconds since the optical interface entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.4
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.4
OpticalSignalLevel int R Current measurement of total downstream optical signal level. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -65.536 dBm (coded as -65536), to 65.534 dBm (coded as 65534) in 0.002 dB increments. This parameter is based on Optical signal level from [Section 9.2.1/G.988]. - 2.4
LowerOpticalThreshold int R Optical level that is used to declare the downstream low received optical power alarm. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -127.5 dBm (coded as -127500) to 0 dBm (coded as 0) in 0.5 dB increments. The value -127500 indicates the device’s internal policy. This parameter is based on Lower optical threshold from [Section 9.2.1/G.988]. - 2.4
UpperOpticalThreshold int R Optical level that is used to declare the downstream high received optical power alarm. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -127.5 dBm (coded as -127500) to 0 dBm (coded as 0) in 0.5 dB increments. The value -127500 indicates the device’s internal policy. This parameter is based on Upper optical threshold from [Section 9.2.1/G.988]. - 2.4
TransmitOpticalLevel int R Current measurement of mean optical launch power. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -65.536 dBm (coded as -65536), to 65.534 dBm (coded as 65534) in 0.002 dB increments. This parameter is based on Transmit optical level from [Section 9.2.1/G.988]. - 2.4
LowerTransmitPowerThreshold int R Minimum mean optical launch power that is used to declare the low transmit optical power alarm. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -63.5 dBm (coded as -63500) to +63.5 dBm (coded as 63500) in 0.5 dB increments. The value -63500 indicates the device’s internal policy. This parameter is based on Lower transmit power threshold from [Section 9.2.1/G.988]. - 2.4
UpperTransmitPowerThreshold int R Maximum mean optical launch power that is used to declare the high transmit optical power alarm. [Dbm1000] The value is measured in dBm/1000, i.e. the value divided by 1000 is dB relative to 1 mW. For example, -12345 means -12.345 dBm, 0 means 0 dBm (1 mW) and 12345 means 12.345 dBm. Valid values are -63.5 dBm (coded as -63500) to +63.5 dBm (coded as 63500) in 0.5 dB increments. The value -63500 indicates the device’s internal policy. This parameter is based on Upper transmit power threshold from [Section 9.2.1/G.988]. - 2.4
Device.Optical.Interface.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.4
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
Device.Cellular. object R This object models cellular interfaces and access points. - 2.8
RoamingEnabled boolean W Enables or disables roaming. - 2.8
RoamingStatus string R

Current roaming status.

Enumeration of:

  • Home
  • Roaming
- 2.8
InterfaceNumberOfEntries unsignedInt R The number of entries in the Interface table. - 2.8
AccessPointNumberOfEntries unsignedInt R The number of entries in the AccessPoint table. - 2.8
Device.Cellular.Interface.{i}. object(0:) R

Cellular interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each instance of this object models a cellular modem with a single radio and a single USIM.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.8
Enable boolean W Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. - 2.8
Status string R

The current operational state of the interface (see [Section 4.2.2/TR-181i2]).

Enumeration of:

  • Up (Corresponds to GPRS, UMTS, LTE etc ATTACHED status)
  • Down
  • Unknown
  • Dormant
  • NotPresent (Corresponds to GPRS, UMTS, LTE etc DETACHED status)
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status
  • SHOULD change to Up if and only if the interface is able to transmit and receive network traffic.
  • SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed)
  • SHOULD remain in the Error state if there is an error or other fault condition detected on the interface
  • SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. Because the interface includes layer 1 the LowerLayerDown value SHOULD never be used. This parameter is based on ifOperStatus from [RFC2863].

Value Change Notification requests for this parameter MAY be denied.

- 2.8
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.8
Name string(:64) R

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.8
LastChange unsignedInt R

The accumulated time in seconds since the interface entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.8
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.8
IMEI string(15) R

International Mobile Station Equipment Identity number, represented as a 15 digit string (digits 0-9).

Possible patterns:

  • [0-9]{15,15}
- 2.8
SupportedAccessTechnologies string[] R

Comma-separated list of strings. Access technologies supported by the interface.

Each list item is an enumeration of:

  • GPRS (GSM with GPRS)
  • EDGE (GSM with EDGE)
  • UMTS
  • UMTSHSPA (UMTS with High Speed Packet Access (HSPA [3GPP-HSPA]))
  • CDMA2000OneX
  • CDMA2000HRPD
  • LTE
  • NR (5G New Radio)
- 2.8
PreferredAccessTechnology string W

The value MUST be a member of the list reported by the SupportedAccessTechnologies parameter, or else be Auto. Preferred access technology.

The factory default value MUST be Auto.

- 2.8
CurrentAccessTechnology string R The value MUST be a member of the list reported by the SupportedAccessTechnologies parameter. Access technology that is currently in use. - 2.8
AvailableNetworks string(:64)[] R

Comma-separated list of strings (maximum number of characters per item 64). List of available networks.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
NetworkRequested string(:64) W

Name of the network which will be used, or an empty string if the network is selected automatically.

The factory default value MUST be an empty string.

- 2.8
NetworkInUse string(:64) R The value MUST be a member of the list reported by the AvailableNetworks parameter, or else be an empty string. The value is an empty string if no network is found, or if the network specified in NetworkRequested is not found. - 2.8
RSSI int R

The received signal strength in dBm. The allowed values depend on CurrentAccessTechnology:

  • For GPRS, EDGE the range is -111 dBm to -49 dBm
  • For UMTS, UMTSHSPA the range is -117 dBm to -54 dBm
  • For LTE, NR the range is -117 dBm to -25 dBm Note: An undetectable signal is indicated by the appropriate lower limit, e.g. -117 dBm for LTE.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
RSRP int R

The Reference Signal Received Power in dBm for LTE, NR values of CurrentAccessTechnology:

  • The valid range of RSRP values from worst to best is -140 dBm to -44 dBm

Value Change Notification requests for this parameter MAY be denied.

- 2.14
RSRQ int R

The Reference Signal Received Quality in dBm for LTE, NR values of CurrentAccessTechnology:

  • RSRQ is calculated using RSSI and RSRP values using RSRQ = (N*RSRP)/RSSI where N is the number of resource blocks (bandwidth).
  • The valid range of RSRP values from worst to best is -20 dBm to -3 dBm

Value Change Notification requests for this parameter MAY be denied.

- 2.14
UpstreamMaxBitRate unsignedInt R The current maximum attainable data rate upstream (expressed in Kbps). - 2.8
DownstreamMaxBitRate unsignedInt R The current maximum attainable data rate downstream (expressed in Kbps). - 2.8
Device.Cellular.Interface.{i}.USIM. object R USIM (Universal Subscriber Identity Module or SIM card) parameters for the interface. - 2.8
Status string R

The current status of the USIM card.

Enumeration of:

  • None (No card available)
  • Available (Card is available but not verified)
  • Valid (Card can be used; either valid PIN was entered, or PIN check is deactivated)
  • Blocked (USIM is blocked because the maximum number of invalid PIN entries was exceeded)
  • Error (An error was detected with the card, OPTIONAL)
- 2.8
IMSI string(14:15) R

International Mobile Subscriber Identity represented as a string with either 14 or 15 digits (digits 0-9). The first 3 digits are the mobile country code (MCC), which are followed by the mobile network code (MNC), either 2 digits (European standard) or 3 digits (North American standard), followed by the mobile subscription identification number (MSIN).

Possible patterns:

  • [0-9]{14,15}
- 2.8
ICCID string(6:20) R

Integrated Circuit Card Identifier represented as a string of up to 20 digits (digits 0-9). The number is composed of the following parts:

  • Major industry identifier (MII), 2 fixed digits, 89 for telecommunication purposes.
  • Country code, 1–3 digits, as defined by ITU-T recommendation [ITU-E.164].
  • identifier, 1–4 digits.
  • Individual account identification number. Its length is variable, but every number under one IIN will have the same length.
  • Single check digit calculated from the other digits using the Luhn algorithm. For cards using an ICCID according to [ITU-E.118] the maximum length is 19 Digits, for GSM cards 20 digits.

Possible patterns:

  • [0-9]{6,20}
- 2.8
MSISDN string(14:15) R

Mobile Subscriber Integrated Service Digital Network Number, a number uniquely identifying a subscription in a GSM, UMTS, or LTE mobile network. [ITU-E.164]

Possible patterns:

  • [0-9]{14,15}
- 2.8
PINCheck string W

Controls the PIN verification of the USIM card.

Enumeration of:

  • OnNetworkAccess (Check the PIN with each access to a new network)
  • Reboot (Check the PIN with first access after (re)boot)
  • Off (Disable the PIN check)
- 2.8
PIN string(:4) W

Allows the Controller to change the USIM PIN used for SIM card activation.

When read, this parameter returns an empty string, regardless of the actual value.

- 2.8
Device.Cellular.Interface.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.8
BytesSent unsignedLong R

[StatsCounter64] The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
BytesReceived unsignedLong R

[StatsCounter64] The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
PacketsSent unsignedLong R

[StatsCounter64] The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
PacketsReceived unsignedLong R

[StatsCounter64] The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
ErrorsSent unsignedLong R

[StatsCounter64] The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
ErrorsReceived unsignedLong R

[StatsCounter64] The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
UnicastPacketsSent unsignedLong R

[StatsCounter64] The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
UnicastPacketsReceived unsignedLong R

[StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
DiscardPacketsSent unsignedLong R

[StatsCounter64] The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
DiscardPacketsReceived unsignedLong R

[StatsCounter64] The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
MulticastPacketsSent unsignedLong R

[StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
MulticastPacketsReceived unsignedLong R

[StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
BroadcastPacketsSent unsignedLong R

[StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
BroadcastPacketsReceived unsignedLong R

[StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
UnknownProtoPacketsReceived unsignedLong R

[StatsCounter64] The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
Device.Cellular.AccessPoint.{i}. object(0:) W

Cellular Access Point table. Each entry is identified by an APN (Access Point Name) that identifies a gateway between the mobile network and another computer network.

At most one entry in this table can exist with a given value for Alias, or with a given value for APN, or with a given value for Interface. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for Alias, APN and Interface such that the new entry does not conflict with any existing entries.

- 2.8
Enable boolean W Enables or disables the Access Point. - 2.8
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.8
APN string(:64) W

Access Point Name.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

- 2.8
Username string(:256) W Username used to authenticate the CPE when making a connection to the Access Point. - 2.8
Password string(:256) W

Password used to authenticate the CPE when making a connection to the Access Point.

When read, this parameter returns an empty string, regardless of the actual value.

- 2.8
Proxy string(:45) W [IPAddress] Proxy server IP address. - 2.8
ProxyPort unsignedInt(1:65535) W Proxy server port. - 2.8
Interface string W

The value MUST be the Path Name of a row in the Cellular.Interface. table. Reference to the interface with which the access point is associated.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

- 2.8
Device.ATM. object R Asynchronous Transfer Mode (ATM) object that contains the Link interface and {{object: referenced Diagnostics.F5Loopback() is command, not object}} diagnostics. - 2.0
LinkNumberOfEntries unsignedInt R The number of entries in the Link table. - 2.0
Device.ATM.Link.{i}. object(0:) W

ATM link-layer table (a stackable interface object as described in [Section 4.2/TR-181i2]). Models an ATM PVC virtual circuit and the ATM Adaption Layer (AAL). An ATM Link entry is typically stacked on top of either a DSL.Channel. or a DSL.BondingGroup. object. When an ATM Link interface is used, a lower-layer DSL.Channel interface MUST be configured with ATM encapsulation (see DSL.Channel.{i}.LinkEncapsulationUsed).

At most one entry in this table can exist with a given value for Alias, or with a given value for Name. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for Alias and Name such that the new entry does not conflict with any existing entries.

- 2.0
Enable boolean W Enables or disables the link. This parameter is based on ifAdminStatus from [RFC2863]. false 2.0
Status string R

The current operational state of the link (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
Down 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the link as assigned by the CPE.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the link entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. <Empty> 2.0
LinkType string W

Indicates the type of connection and refers to the complete stack of protocol used for this connection.

Enumeration of:

  • EoA ([RFC2684] bridged Ethernet over ATM)
  • IPoA ([RFC2684] routed IP over ATM)
  • PPPoA ([RFC2364] PPP over ATM)
  • CIP ([RFC2225] Classical IP over ATM)
  • Unconfigured
- 2.0
AutoConfig boolean R Indicates if the CPE is currently using some auto configuration mechanisms for this connection. If this variable is true, all writable variables in this connection instance become read-only. Any attempt to change one of these variables SHOULD fail and an error SHOULD be returned. - 2.0
DestinationAddress string(:256) W

Destination address of this link, in the form “VPI/VCI” (e.g. “8/23” or “0/35”).

Possible patterns:

  • \d+/\d+
- 2.0
Encapsulation string W

Identifies the connection encapsulation that will be used.

Enumeration of:

  • LLC
  • VCMUX
- 2.0
FCSPreserved boolean W This flag tells if a checksum SHOULD be added in the ATM payload. It does not refer to the checksum of one of the ATM cells or AALX packets. In case of LLC or VCMUX encapsulation, this ATM checksum is the FCS field described in [RFC2684]. It is only applicable in the upstream direction. - 2.0
VCSearchList string[](:256) W

Comma-separated list (maximum number of characters 256) of strings. Ordered list of VPI/VCI pairs to search if a link using the DestinationAddress cannot be established. In the form “VPI1/VCI1, VPI2/VCI2, …”.

Each list item matches one of:

  • \d+/\d+ Example:
0/35, 8/35, 1/35
- 2.0
AAL string R

Describes the ATM Adaptation Layer (AAL) currently in use on the PVC.

Enumeration of:

  • AAL1
  • AAL2
  • AAL3
  • AAL4
  • AAL5
- 2.0
Device.ATM.Link.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
TransmittedBlocks unsignedInt R

The current count of successfully transmitted cells.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ReceivedBlocks unsignedInt R

The current count of successfully received cells.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
CRCErrors unsignedInt R

Count of the ATM layer cyclic redundancy check (CRC) errors. This refers to CRC errors at the ATM adaptation layer (AAL). The AAL in use is indicated by the AAL parameter. The value of the CRCErrors parameter MUST be 0 for AAL types that have no CRCs.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
HECErrors unsignedInt R

Count of the number of Header Error Check related errors at the ATM layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.ATM.Link.{i}.QoS. object R The ATM Link QoS object. - 2.0
QoSClass string W

Describes the ATM Quality Of Service (QoS) being used on the VC.

Enumeration of:

  • UBR
  • CBR
  • GFR
  • VBR-nrt
  • VBR-rt
  • UBR+
  • ABR
- 2.0
PeakCellRate unsignedInt W Specifies the upstream peak cell rate in cells per second. - 2.0
MaximumBurstSize unsignedInt W Specifies the upstream maximum burst size in cells. - 2.0
SustainableCellRate unsignedInt W Specifies the upstream sustainable cell rate, in cells per second. - 2.0
Device.ATM.Diagnostics. object R The ATM Diagnostics object. - 2.0
F5Loopback() command - [ASYNC] This command provides access to an ATM-layer F5 OAM loopback test. - 2.12
⇒ Input. arguments - Input arguments. -
Interface string(:256) W The value MUST be the Path Name of a row in the ATM.Link. table. This is the interface over which the test is to be performed. - 2.0
NumberOfRepetitions unsignedInt(1:) W Number of repetitions of the ping test to perform before reporting the results. - 2.0
Timeout unsignedInt(1:) W Timeout in milliseconds for the ping test. - 2.0
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL)
  • Error_Internal
  • Error_Other If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
SuccessCount unsignedInt R Result parameter indicating the number of successful pings (those in which a successful response was received prior to the timeout) in the most recent ping test. - 2.0
FailureCount unsignedInt R Result parameter indicating the number of failed pings in the most recent ping test. - 2.0
AverageResponseTime unsignedInt R Result parameter indicating the average response time in milliseconds over all repetitions with successful responses of the most recent ping test. If there were no successful responses, this value MUST be zero. - 2.0
MinimumResponseTime unsignedInt R Result parameter indicating the minimum response time in milliseconds over all repetitions with successful responses of the most recent ping test. If there were no successful responses, this value MUST be zero. - 2.0
MaximumResponseTime unsignedInt R Result parameter indicating the maximum response time in milliseconds over all repetitions with successful responses of the most recent ping test. If there were no successful responses, this value MUST be zero. - 2.0
Device.PTM. object R Packet Transfer Mode ([Annex H/G.993.1]). This object contains the Link interface. - 2.0
LinkNumberOfEntries unsignedInt R The number of entries in the Link table. - 2.0
Device.PTM.Link.{i}. object(0:) W

PTM link-layer table (a stackable interface object as described in [Section 4.2/TR-181i2]). Models a layer 2 variable-sized packet interface. A PTM Link entry is typically stacked on top of either a FAST.Line., DSL.Channel., or a DSL.BondingGroup. object. When a PTM Link interface is used, a lower-layer DSL.Channel interface MUST be configured with PTM encapsulation (see DSL.Channel.{i}.LinkEncapsulationUsed).

At most one entry in this table can exist with a given value for Alias, or with a given value for Name. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for Alias and Name such that the new entry does not conflict with any existing entries.

- 2.0
Enable boolean W Enables or disables the link. This parameter is based on ifAdminStatus from [RFC2863]. false 2.0
Status string R

The current operational state of the link (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
Down 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the link as assigned by the CPE.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the link entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. <Empty> 2.0
MACAddress string(:17) R [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. - 2.0
Device.PTM.Link.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.Ethernet. object R Ethernet object. This object models several Ethernet interface objects, each representing a different stack layer, including: Interface, Link, and VLANTermination. Interface is media-specific and models a port, the PHY layer, and the MAC layer. Link is media-independent and models the Logical Link Control (LLC) layer. An “outer” VLANTermination, when present, is expected to be stacked on top of Link objects to receive and send frames with a configured VLANID. - 2.0
WoLSupported boolean R Indicates that WoL (Wake on LAN) over Ethernet is supported. - 2.13
FlowControlSupported boolean R Indicates that Flow Control over Ethernet is supported, as per [802.3-2015]. - 2.14
InterfaceNumberOfEntries unsignedInt R The number of entries in the Interface table. - 2.0
LinkNumberOfEntries unsignedInt R The number of entries in the Link table. - 2.0
VLANTerminationNumberOfEntries unsignedInt R The number of entries in the VLANTermination table. - 2.0
RMONStatsNumberOfEntries unsignedInt R The number of entries in the RMONStats table. - 2.4
LAGNumberOfEntries unsignedInt R The number of entries in the LAG table. - 2.12
Device.Ethernet.Interface.{i}. object(0:) R

Ethernet interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models physical Ethernet ports, but in terms of the interface stack it also models the PHY and MAC level Ethernet interface.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
Enable boolean W Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. - 2.0
Status string R

The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the interface entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.0
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.0
MACAddress string(:17) R [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. - 2.0
MaxBitRate int(-1:) W The maximum upstream and downstream PHY bit rate supported by this interface (expressed in Mbps). A value of -1 indicates automatic selection of the maximum bit rate. - 2.0
CurrentBitRate unsignedInt R

The current upstream and downstream PHY bit rate on this interface (expressed in Mbps). A value of 0 indicates that the current bit rate is unknown.

Value Change Notification requests for this parameter MAY be denied.

- 2.7
DuplexMode string W

The duplex mode available to this connection.

Enumeration of:

  • Half
  • Full
  • Auto
- 2.0
EEECapability boolean R Indicates whether this physical ethernet port supports Energy Efficient Ethernet as specified in [Section 78/802.3-2012_section6]. - 2.8
EEEEnable boolean W Whether Energy Efficient Ethernet [Section 78/802.3-2012_section6] support is currently enabled. When enabled, this ethernet port will be capable of entering or exiting Low Power Idle (LPI) mode. - 2.8
Device.Ethernet.Interface.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.Ethernet.Link.{i}. object(0:) W

Ethernet link layer table (a stackable interface object as described in [Section 4.2/TR-181i2]). Table entries model the Logical Link Control (LLC) layer. It is expected that an Ethernet Link interface can be stacked above any lower-layer interface object capable of carrying Ethernet frames.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name, or with a given value for MACAddress. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for Alias, Name and MACAddress such that the new entry does not conflict with any existing entries.

- 2.0
Enable boolean W Enables or disables the link. This parameter is based on ifAdminStatus from [RFC2863]. false 2.0
Status string R

The current operational state of the link (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
Down 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the link as assigned by the CPE.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the link entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. <Empty> 2.0
MACAddress string(:17) R

[MACAddress] The MAC address used for packets sent via this interface. Provides the source MAC address for outgoing traffic and the destination MAC address for incoming traffic.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

- 2.0
PriorityTagging boolean W Enables or disables priority tagging on this Ethernet Link. When true, egress frames leaving this interface will be priority tagged with the frame’s associated priority value, which will either be derived directly from the ingress frame or else set via QoS.Classification.{i}.EthernetPriorityMark or QoS.Classification.{i}.InnerEthernetPriorityMark. When false, egress frames leaving this interface will be untagged. The parameter does not affect reception of ingress frames. false 2.0
FlowControl boolean W Configures Flow Control on given Ethernet port. When set to true, it activates the exchange of pause-resume flow control frames. false 2.14
Device.Ethernet.Link.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.Ethernet.VLANTermination.{i}. object(0:) W

VLAN Termination table (a stackable interface object as described in [Section 4.2/TR-181i2]). A VLAN Termination entry is typically stacked on top of a Link object to receive and send frames with the configured VLANID.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for Alias and Name such that the new entry does not conflict with any existing entries.

- 2.0
Enable boolean W Enables or disables the VLANTermination entry. This parameter is based on ifAdminStatus from [RFC2863]. false 2.0
Status string R

The current operational state of the VLANTermination entry (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
Down 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the VLANTermination entry as assigned by the CPE.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the VLANTermination entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. <Empty> 2.0
VLANID unsignedInt(1:4094) W The VLAN ID for this VLANTermination entry (as defined in [802.1Q-2011]). Only ingress frames with this VLAN ID will be passed to higher protocol layers; frames sent from higher protocol layers will be tagged with this VLAN ID. - 2.0
TPID unsignedInt W The Tag Protocol Identifier (TPID) assigned to this VLANTermination. The TPID is an EtherType value used to identify the frame as a tagged frame. Standard [Table 9.1/802.1Q-2011] TPID values are: *S-TAG 0x88A8 = 34984 *C-TAG 0x8100 = 33024 Non-Standard TPID values are: *S-TAG 0x9100 = 37120 33024 2.7
Device.Ethernet.VLANTermination.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.Ethernet.RMONStats.{i}. object(0:) W

Ethernet statistics based on the [RFC2819] RMON-MIB etherStatsTable, with some extensions inspired by [Section 9.3.32/G.988]. Each instance is associated with an interface capable of transporting Ethernet-encapsulated packets, and contains a set of unidirectional Ethernet statistics. The statistics are sampled either on ingress or on egress. This is determined as follows:

  • If the instance is associated with an egress queue (or queues) via the Queue parameter or by setting AllQueues to true then data is sampled on egress. In this case Bytes etc measure the data that has been sent on the interface, possibly filtered by Queue or VLANID.
  • Otherwise data is sampled on ingress. In this case Bytes etc measure the data that has been received on the interface, possibly filtered by VLANID. When sampling on egress, the term received means received by the queuing sub-system. Multiple instances can be associated with a single interface: individual instances can be configured to collect data associated with the entire interface, or with a particular VLAN and/or queue. The CPE MUST reset each instances’s Stats parameters whenever the instance is disabled and re-enabled. Whether this reset occurs when the instance becomes operationally disabled (Status = Disabled) or administratively enabled (Enable = true) is a local matter to the CPE. This is similar to the behavior of interface statistics, e.g. as specified for Device.Ethernet.Interface.{i}.Stats. Furthermore, this instance’s Stats parameters MUST be reset whenever the referenced interface’s Stats parameters are reset, or when the referenced queue or VLAN is disabled and re-enabled. For enabled table entries, if Interface references an interface that is not capable of transporting Ethernet-encapsulated packets, or if Queue references a queue that is not instantiated on Interface, or if Queue is not a valid reference and AllQueues is false, the table entry is inoperable and the CPE MUST set Status to Error_Misconfigured. Note: The RMONStats table includes unique key parameters that are strong references. If a strongly referenced object is deleted, the CPE will set the referencing parameter to an empty string. However, doing so under these circumstances might cause the updated RMONStats row to then violate the table’s unique key constraint; if this occurs, the CPE MUST set Status to Error_Misconfigured and disable the offending RMONStats row.

At most one entry in this table can exist with a given value for Alias, or with the same values for all of Interface, VLANID and Queue. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries.

- 2.4
Enable boolean W Enables or disables this instance. false 2.4
Status string R

The status of this instance. Enumeration of:

  • Disabled
  • Enabled
  • Error_Misconfigured
  • Error (OPTIONAL) The Error_Misconfigured value indicates that a necessary configuration value is undefined or invalid. The Error value MAY be used by the CPE to indicate a locally defined error condition.
Disabled 2.4
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.4
Name string(:64) R The textual name of the RMONStats entry as assigned by the CPE. - 2.4
Interface string W The interface associated with this instance. The value MUST be the Path Name of an interface that is capable of transporting Ethernet-encapsulated packets. The term “capable of transporting Ethernet-encapsulated packets” means “has an Ethernet header” and therefore refers to any interface that is at or below an Ethernet.Link instance in the interface stack. <Empty> 2.4
VLANID unsignedInt(0:4094) W Filter criterion. The VLAN ID for which statistics are to be collected. A zero value indicates that all packets, whether or not they have a VLAN header, will be considered. A non-zero value indicates that only packets that have the the specified VLAN ID will be considered. 0 2.4
Queue string W The value MUST be the Path Name of a row in the Device.QoS.Queue. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. Filter criterion. The egress queue with which this instance is associated. Only packets that are sent to the referenced queue will be considered. <Empty> 2.4
AllQueues boolean W Indicates whether this instance applies to all queues. If true, the value of Queue is ignored since all egress queues are indicated. false 2.4
DropEvents unsignedInt R

The total number of events in which packets were dropped due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected. This parameter is based on etherStatsDropEvents from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
Bytes unsignedLong R

The total number of bytes (including those in bad packets) received (excluding framing bits but including FCS bytes). This parameter is based on etherStatsOctets from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
Packets unsignedLong R

The total number of packets (including bad packets, broadcast packets, and multicast packets) received. This parameter is based on etherStatsPkts from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
BroadcastPackets unsignedLong R

The total number of good packets received that were directed to the broadcast address. Note that this does not include multicast packets. This parameter is based on etherStatsBroadcastPkts from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
MulticastPackets unsignedLong R

The total number of good packets received that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address. This parameter is based on etherStatsMulticastPkts from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
CRCErroredPackets unsignedInt R

The total number of packets received that had a length (excluding framing bits, but including FCS bytes) of between 64 and 1518 bytes, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of bytes (FCS Error) or a bad FCS with a non-integral number of bytes (Alignment Error). This parameter is based on etherStatsCRCAlignErrors from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
UndersizePackets unsignedInt R

The total number of packets received that were less than 64 bytes long (excluding framing bits, but including FCS bytes) and were otherwise well formed. This parameter is based on etherStatsUndersizePkts from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
OversizePackets unsignedInt R

The total number of packets received that were longer than 1518 bytes (excluding framing bits, but including FCS bytes) and were otherwise well formed. This parameter is based on etherStatsOversizePkts from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
Packets64Bytes unsignedLong R

The total number of packets (including bad packets) received that were 64 bytes in length (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts64Octets from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
Packets65to127Bytes unsignedLong R

The total number of packets (including bad packets) received that were between 65 and 127 bytes in length inclusive (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts65to127Octets from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
Packets128to255Bytes unsignedLong R

The total number of packets (including bad packets) received that were between 128 and 255 bytes in length inclusive (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts6128to255Octets from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
Packets256to511Bytes unsignedLong R

The total number of packets (including bad packets) received that were between 256 and 511 bytes in length inclusive (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts256to511Octets from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
Packets512to1023Bytes unsignedLong R

The total number of packets (including bad packets) received that were between 512 and 1023 bytes in length inclusive (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts512to1023Octets from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
Packets1024to1518Bytes unsignedLong R

The total number of packets (including bad packets) received that were between 1024 and 1518 bytes in length inclusive (excluding framing bits but including FCS bytes). This parameter is based on etherStatsPkts1024to1518Octets from [RFC2819].

Value Change Notification requests for this parameter MAY be denied.

0 2.4
Device.Ethernet.WoL. object R This object provides access to the WoL (Wake on LAN) funtionality. - 2.13
SendMagicPacket() command - [ASYNC] This command sends a magic packet over the CPE active Ethernet interfaces. - 2.13
⇒ Input. arguments - Input arguments. -
MACAddress string(:17) W [MACAddress] MAC address target of the magic packet. - 2.13
Password string W The SecureOn password. The parameter value can be empty or, if present, can contain either 4 bytes or 6 bytes. - 2.13
Device.Ethernet.LAG.{i}. object(0:) W

Ethernet Link Aggregation Group (LAG) table (a stackable interface object as described in [Section 4.2/TR-181i2]). Table entries model the Link Aggregation Sub-Layer as defined in [802.3-2015] and [802.1AX-2014]. It is expected that a LAG interface can only be stacked above Ethernet.Interface interfaces. The CPE can reject creation of additional LAG instances if this would exceed its capabilities.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name, or with a given value for MACAddress. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for Alias, Name and MACAddress such that the new entry does not conflict with any existing entries.

- 2.12
Enable boolean W Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. - 2.12
Status string R

The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.12
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.12
Name string(:64) R

The textual name of the LAG interface as assigned by the CPE.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.12
LastChange unsignedInt R

The accumulated time in seconds since the interface entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string.. See [Section 4.2.1/TR-181i2]. LowerLayers must reference to Device.Ethernet.Interface instances where Link Aggregation Group is configured by the CPE. For example, “Device.Ethernet.Interface.1, Device.Ethernet.Interface.2” - 2.12
MACAddress string(:17) W

[MACAddress] MAC address of the Link Aggregation Interface.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

- 2.12
Device.Ethernet.LAG.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.12
BytesSent unsignedLong R

[StatsCounter64] The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
BytesReceived unsignedLong R

[StatsCounter64] The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
PacketsSent unsignedLong R

[StatsCounter64] The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
PacketsReceived unsignedLong R

[StatsCounter64] The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
ErrorsSent unsignedInt R

[StatsCounter32] The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
ErrorsReceived unsignedInt R

[StatsCounter32] The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
UnicastPacketsSent unsignedLong R

[StatsCounter64] The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
UnicastPacketsReceived unsignedLong R

[StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
DiscardPacketsSent unsignedInt R

[StatsCounter32] The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
DiscardPacketsReceived unsignedInt R

[StatsCounter32] The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
MulticastPacketsSent unsignedLong R

[StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
MulticastPacketsReceived unsignedLong R

[StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
BroadcastPacketsSent unsignedLong R

[StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
BroadcastPacketsReceived unsignedLong R

[StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
UnknownProtoPacketsReceived unsignedInt R

[StatsCounter32] The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.12
Device.USB. object R Universal Serial Bus ([USB1.0], [USB2.0], [USB3.0]). This object contains the Interface, Port, and USBHosts objects. - 2.0
InterfaceNumberOfEntries unsignedInt R The number of entries in the Interface table. - 2.0
PortNumberOfEntries unsignedInt R The number of entries in the Port table. - 2.0
Device.USB.Interface.{i}. object(0:) R

USB interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). This table models master and slave USB physical interfaces that support carrying Ethernet frames, e.g. via the USB Communication Device Class.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
Enable boolean W Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. - 2.0
Status string R

The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the interface entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.0
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.0
MACAddress string(:17) R [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. - 2.0
MaxBitRate unsignedInt R The maximum PHY bit rate supported by this interface (expressed in Mbps). - 2.0
Port string(:256) R The value MUST be the Path Name of a row in the Port. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. This is the USB port associated with this interface object. - 2.0
Device.USB.Interface.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.USB.Port.{i}. object(0:) R

USB Port table. This table models master and slave USB physical ports on the device.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R The textual name of the port. - 2.0
Standard string(:4) R USB specification version supported by the Port. Example: “1.1” - 2.0
Type string R

Type of the USB connection.

Enumeration of:

  • Host
  • Hub
  • Device
- 2.0
Receptacle string R

Receptacle of the port.

Enumeration of:

  • Standard-A
  • Standard-B
  • Powered-B
  • Micro-AB
  • Micro-B
- 2.0
Rate string R

Current speed of the USB connection. Enumeration of:

  • Low (1.5 Mbits/sec (187.5 KB/sec) defined in [USB1.0])
  • Full (12 Mbits/sec (1.5 MB/sec) defined in [USB1.0])
  • High (480 Mbits/sec (60 MB/sec) defined in [USB2.0])
  • Super (5.0 Gbits/sec (625 MB/sec) defined in [USB3.0])
- 2.0
Power string R

Power configuration of the USB connection. Enumeration of:

- 2.0
Device.USB.USBHosts. object R This object models the CPE’s USB Host controllers. See [Appendix XVII/TR-181i2] for Theory of Operation. - 2.0
HostNumberOfEntries unsignedInt R The number of entries in the Host table. - 2.0
Device.USB.USBHosts.Host.{i}. object(0:) R

Table of CPE USB Host controllers.

At most one entry in this table can exist with a given value for Name, or with a given value for Alias.

- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.3
Enable boolean W Enables or disables the USB Host controller. - 2.0
Name string(:64) R User-readable host controller name. - 2.0
Type string R

Type of USB Host

Enumeration of:

  • OHCI (Open Host Controller Interface)
  • EHCI (Enhanced Host Controller Interface)
  • UHCI (Universal Host Controller Interface)
  • xHCI (Extensible Host Controller Interface)
- 2.0
Reset() command - Reset the Host Controller and apply the reset signaling (see [Chapter 7.1.7.5/USB2.0]) to all of the Host Controller Hub downstream ports. - 2.12
PowerManagementEnable boolean W When set to true, PowerManagementEnable enables the Host Controller to invoke Power Management policy, i.e. controlled Suspend (see [USB2.0], Chapters 4.3.2, 7.1.7.6, and 11.9). When set to false PowerManagementEnable immediately disables the Host controller Power Management policy. - 2.0
USBVersion string(:4) R USB specification version with which the controller complies. Example: “1.1” - 2.0
DeviceNumberOfEntries unsignedInt R The number of entries in the Device table. - 2.0
Device.USB.USBHosts.Host.{i}.Device.{i}. object(0:) R

Table of connected USB devices.

At most one entry in this table can exist with a given value for DeviceNumber.

- 2.0
DeviceNumber unsignedInt R Device number on USB bus. - 2.0
USBVersion string(:4) R USB specification version with which the device complies. Example: “1.1” - 2.0
DeviceClass hexBinary(:1) R Class Code as assigned by USB-IF. When 0x00, each device specifies its own class code. When 0xFF, the class code is vendor specified. - 2.0
DeviceSubClass hexBinary(:1) R Subclass code (assigned by USB-IF). - 2.0
DeviceVersion unsignedInt(:65535) R Device release number. - 2.0
DeviceProtocol hexBinary(:1) R Protocol code (assigned by USB-IF). - 2.0
ProductID unsignedInt(:65535) R Product ID (assigned by manufacturer). - 2.0
VendorID unsignedInt(:65535) R Vendor ID (assigned by USB-IF). - 2.0
Manufacturer string(:64) R Device Manufacturer string descriptor. - 2.0
ProductClass string(:64) R Device Product Class string descriptor. - 2.0
SerialNumber string(:64) R Device SerialNumber string descriptor. - 2.0
Port unsignedInt(:255) R Hub port on parent device. 0 when no parent. - 2.0
USBPort string R The value MUST be the Path Name of a row in the USB.Port. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. This is a reference to the USB host device to which this (external) USB device is connected. - 2.0
Rate string R

Speed of the USB device. Enumeration of:

  • Low (1.5 Mbits/sec (187.5 KB/sec) defined in [USB1.0])
  • Full (12 Mbits/sec (1.5 MB/sec) defined in [USB1.0])
  • High (480 Mbits/sec (60 MB/sec) defined in [USB2.0])
  • Super (5.0 Gbits/sec (625 MB/sec) defined in [USB3.0]) Internal signaling between the connected USB device and the USB Host Controller provide the information needed to determine the negotiated rate.
- 2.0
Parent string R The value MUST be the Path Name of a row in the Device. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. This is a reference to the parent USB device (e.g. hub device). This is an empty string for a device connected to the Host controller (root hub). - 2.0
MaxChildren unsignedInt R Number of ports. Only applies for hub device, equal to 0 for other devices. - 2.0
IsSuspended boolean R When true the associated Device is in a suspended (i.e. low-power) state (see [Chapter 11.9/USB2.0]). When false the associated Device is in any of the other states specified by the USB 2.0 Device State Machine (see [Chapter 9.1.1/USB2.0]). - 2.0
IsSelfPowered boolean R When true the associated device is at least partly powered by a local source (see [Chapter 9.4.5/USB2.0]). When false the associated device draws all the current it needs from the USB bus. - 2.0
ConfigurationNumberOfEntries unsignedInt R The number of entries in the Configuration table. - 2.0
Device.USB.USBHosts.Host.{i}.Device.{i}.Configuration.{i}. object(0:) R

Table of device configurations.

At most one entry in this table can exist with a given value for ConfigurationNumber.

- 2.0
ConfigurationNumber unsignedInt R The identifier for each Device Configuration. - 2.0
InterfaceNumberOfEntries unsignedInt R The number of entries in the Interface table. - 2.0
Device.USB.USBHosts.Host.{i}.Device.{i}.Configuration.{i}.Interface.{i}. object(0:) R

Table of device interface descriptors.

At most one entry in this table can exist with a given value for InterfaceNumber.

- 2.0
InterfaceNumber unsignedInt(:255) R Number of this interface (from USB interface descriptor). - 2.0
InterfaceClass hexBinary(:1) R Class Code as assigned by USB-IF. When 0x00, each interface specifies its own class code. When 0xFF, the class code is vendor specified. - 2.0
InterfaceSubClass hexBinary(:1) R Subclass code (assigned by USB-IF). - 2.0
InterfaceProtocol hexBinary(:1) R Protocol code (assigned by USB-IF). - 2.0
Device.HPNA. object R HPNA object that contains the Interface and Diagnostics objects. The HPNA (also known as HomePNA) industry standard [G.9954] defines peer to peer communication for home networking over existing coax cables and telephone wiring within the home. - 2.0
InterfaceNumberOfEntries unsignedInt R The number of entries in the Interface table. - 2.0
Device.HPNA.Interface.{i}. object(0:) R

HPNA interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each table entry models the PHY and MAC levels of an HPNA interface [G.9954].

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
Enable boolean W Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. - 2.0
Status string R

The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the interface entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.0
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.0
MACAddress string(:17) R [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. - 2.0
FirmwareVersion string(:64) R This interface’s firmware version. - 2.0
NodeID unsignedInt R The Node ID of this interface. - 2.0
IsMaster boolean R Whether this interface is the HPNA network master. - 2.0
Synced boolean R Whether this interface is synchronized with the HPNA network master. If this interface is the HPNA network master, Synced MUST be true. - 2.0
TotalSyncTime unsignedInt R

Total time in seconds (since device reset) that this interface has been up and synchronized to the HPNA network master.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MaxBitRate unsignedInt R The maximum HPNA PHY bit rate (expressed in Mbps) of this interface. - 2.0
NetworkUtilization unsignedInt(0:1000) R Current HPNA network utilization (expressed in 0.1%). - 2.0
PossibleConnectionTypes string[] R

Comma-separated list of strings. List items indicate the types of connections possible for this interface. Each list item is an enumeration of:

  • Phone
  • Coax
- 2.0
ConnectionType string[] W Each list item MUST be a member of the list reported by the PossibleConnectionTypes parameter. Comma-separated list of strings. Connection type(s) for which the HPNA protocol is active. - 2.0
PossibleSpectralModes string[] R

Comma-separated list of strings. List items indicate the spectral modes possible for this interface. Each list item is an enumeration of:

  • A (4-20MHz - Phone / Coax)
  • B (12-28MHz - Phone / Coax)
  • C (36-52MHz - Coax only)
  • D (4-36MHz - Coax only)
- 2.0
SpectralMode string W The value MUST be a member of the list reported by the PossibleSpectralModes parameter. Spectral mode for which the HPNA protocol is active. - 2.0
MTU unsignedInt W Maximum Transmission Unit for this HPNA interface (expressed in bytes). - 2.0
NoiseMargin unsignedInt W The desired noise margin for which the local HPNA interface has been configured (expressed in 0.1dB). - 2.0
DefaultNonLARQPER unsignedInt W The desired packet error rate for which the local HPNA interface has been configured (expressed in 1E-8, e.g. PER of 1.27E-6 will be presented as 127). - 2.0
LARQEnable boolean W Enable or disable the Limited Automatic Repeat Request (LARQ) mechanism. - 2.0
MinMulticastRate unsignedInt W The minimum multicast (and broadcast) rate that can be negotiated on the HPNA network directly accessible via this interface (expressed in Mbps). - 2.0
NegMulticastRate unsignedInt R The negotiated multicast (and broadcast) rate on the HPNA network directly accessible via this interface (expressed in Mbps). - 2.0
MasterSelectionMode string W

Master selection mode. Enumeration of:

  • Automatic (Automatic master selection)
  • ForceEndpoint (Force local HPNA interface to be end point)
  • ForceMaster (Force local HPNA interface to be master)
- 2.0
AssociatedDeviceNumberOfEntries unsignedInt R The number of entries in the AssociatedDevice table. This is the number of HPNA nodes that are directly accessible via this interface. - 2.0
Device.HPNA.Interface.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.HPNA.Interface.{i}.QoS. object R QoS configuration object. - 2.0
FlowSpecNumberOfEntries unsignedInt R The number of entries in the FlowSpec table. - 2.0
Device.HPNA.Interface.{i}.QoS.FlowSpec.{i}. object(0:) W

Flow specification table. The QoS.Classification table is used to classify ingress traffic, where QoS.Classification.{i}.TrafficClass is one of the classification result outputs. This TrafficClass value can be used to look up the appropriate FlowSpec entry (i.e. the FlowSpec entry whose TrafficClasses list contains a matching traffic class). For enabled table entries, if TrafficClasses is an empty string then the table entry is inoperable and the CPE MUST set Status to Error_Misconfigured.

At most one entry in this table can exist with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries.

- 2.0
Enable boolean W Enables or disables the table entry. false 2.0
Status string R

The status of this entry. Enumeration of:

  • Disabled
  • Enabled
  • Error_Misconfigured
  • Error (OPTIONAL) The Error_Misconfigured value indicates that a necessary configuration value is undefined or invalid. The Error value MAY be used by the CPE to indicate a locally defined error condition.
Disabled 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
TrafficClasses unsignedInt[](:256) W Comma-separated list (maximum number of characters 256) of unsigned integers. This list identifies the set of traffic classes associated with this flow spec. <Empty> 2.0
FlowType string W

Flow type. Enumeration of:

  • CBR (Constant Bit Rate)
  • VBR (Variable Bit Rate)
  • VBR-NRT (Variable Bit Rate - Non Real Time)
  • BE (Best Effort)
BE 2.0
Priority unsignedInt(0:7) W Flow queue network priority. Priority 0 is the lowest priority. 0 2.0
Latency unsignedInt(0:999) W Maximum latency of the flow (expressed in milliseconds). Value 0 means no latency requirements. 0 2.0
Jitter unsignedInt(0:999) W Maximum jitter of the flow (expressed in milliseconds). Value 0 means no jitter requirements. 0 2.0
PacketSize unsignedInt(0:) W Typical packet size. Value 0 means undefined packet size. 0 2.0
MinRate unsignedInt W Minimum required rate in Kbps. Value 0 means no MinRate requirements. 0 2.0
AvgRate unsignedInt W Average required rate in Kbps. Value 0 means no AvgRate requirements. 0 2.0
MaxRate unsignedInt W Maximum required rate in Kbps. Value 0 means no MaxRate requirements. 0 2.0
PER unsignedInt W The desired packet error rate (expressed in 1E-8, e.g. PER of 1.27E-6 will be presented as 127). Value 0 means no PER requirements. 0 2.0
Timeout unsignedInt W Flow inactivity tear down timeout (expressed in milliseconds). Value 0 means unlimited timeout. 0 2.0
Device.HPNA.Interface.{i}.AssociatedDevice.{i}. object(0:) R

This table provides information about other HPNA devices that are directly accessible via this HPNA interface.

At most one entry in this table can exist with a given value for MACAddress.

- 2.0
MACAddress string(:17) R [MACAddress] The physical address of this node. - 2.0
NodeID unsignedInt R The Node ID of this node. - 2.0
IsMaster boolean R Whether this node is the HPNA network master. - 2.0
Synced boolean R Whether this node is synchronized with the HPNA network master. If this node is the HPNA network master, Synced MUST be true. - 2.0
TotalSyncTime unsignedInt R

Total time in seconds (since device reset) that this node has been up and synchronized to the HPNA network master.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MaxBitRate unsignedInt R This node’s maximum HPNA PHY bit rate (expressed in Mbps). - 2.0
PHYDiagnosticsEnable boolean W Enable / disable PHY throughput diagnostics mode on this node. All devices that are enabled will participate in the HPNA network PHY throughput diagnostics process. - 2.0
Active boolean R Whether or not this node is currently present in the HPNA network. The ability to list inactive nodes is OPTIONAL. If the CPE includes inactive nodes in this table, Active MUST be set to false for each inactive node. The length of time an inactive node remains listed in this table is a local matter to the CPE. - 2.0
Device.HPNA.Diagnostics. object R The HPNA Diagnostics object. - 2.0
PHYThroughput() command - [ASYNC] HPNA PHY throughput diagnostics configuration and results. When diagnostics are requested, all HPNA nodes for which the Interface.{i}.AssociatedDevice.{i}.PHYDiagnosticsEnable parameter is set enter PHY diagnostics mode. - 2.12
⇒ Input. arguments - Input arguments. -
Interface string(:256) W The value MUST be the Path Name of a row in the HPNA.Interface. table. This is the interface over which the test is to be performed. - 2.0
NumPacketsInBurst unsignedInt W Number of test packet in burst to be send during PHY diagnostics test from each HPNA device to other HPNA device in the HPNA network. - 2.0
BurstInterval unsignedInt W Test packet burst interval length (expressed in milliseconds). - 2.0
TestPacketPayloadLength unsignedInt(0:1480) W Payload length in the test packets. - 2.0
PayloadEncoding unsignedInt W HPNA payload encoding in PHY diagnostics. 0 is used for negotiated payload between devices according to line conditions. - 2.0
PayloadDataGen unsignedInt W Test packets payload data generator value. - 2.0
PayloadType string W

Test packets payload type. Enumeration of:

  • Pattern
  • IncrementByte In Pattern mode the PayloadDataGen value is repeated pattern in the payload. In IncrementByte mode LSByte in PayloadDataGen is used as first payload and next bytes in payload are incremented.
- 2.0
PriorityLevel unsignedInt(0:7) W Priority level of PHY diagnostics packets (0 lowest -7 highest). - 2.0
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL)
  • Error_FailToEnableCert
  • Error_CertCmdTimeout
  • Error_UnknownErr
  • Error_UnsupportedOpcode
  • Error_InvalidParam
  • Error_UnsupportedCmdSegment
  • Error_UnsupportedDataGen
  • Error_InvalidSequence
  • Error_InvalidFrame
  • Eror_InvalidOpcode If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
Result.{i}. object(0:) R

PHY throughput diagnostics results. Each result object corresponds to unidirectional traffic between two PHY diagnostics-enabled nodes (so there are two such objects for each such pair).

This table’s Instance Numbers MUST be 1, 2, 3… (assigned sequentially without gaps).

At most one entry in this table can exist with the same values for both SrcMACAddress and DestMACAddress.

- 2.0
SrcMACAddress string(:17) R [MACAddress] HPNA source MAC address. - 2.0
DestMACAddress string(:17) R [MACAddress] HPNA destination MAC address. - 2.0
PHYRate unsignedInt R PHY diagnostics HPNA PHY rate (expressed in Mbps). - 2.0
BaudRate unsignedInt R PHY Baud rate (expressed in Kbaud). - 2.0
SNR unsignedInt R PHY diagnostics SNR (expressed in 0.1dB). - 2.0
PacketsReceived unsignedInt R Number of received packets in PHY diagnostics mode. - 2.0
Attenuation unsignedInt R Measured attenuation (expressed in 0.1dB). - 2.0
PerformanceMonitoring() command - [ASYNC] HPNA performance monitoring configuration and results. Performance monitoring results are sampled from all nodes in the HPNA network. All packet related counters are sampled synchronized at all nodes in the HPNA network in order to derive packet loss calculations in the HPNA network. - 2.12
⇒ Input. arguments - Input arguments. -
Interface string(:256) W The value MUST be the Path Name of a row in the HPNA.Interface. table. This is the interface over which the test is to be performed. - 2.0
SampleInterval unsignedInt W Time in seconds between automatic collection of performance monitoring data. A value of zero disables automatic collection of data. The CPE MAY impose a minimum sample interval, in which case an attempt to set a (non-zero) interval that is less than this minimum MUST set the interval to the minimum and MUST NOT be regarded as an error. If SampleInterval is a simple fraction of a day, e.g. 900 (a quarter of an hour) or 3600 (an hour), the CPE MAY choose to align sample intervals with time of day, but is not required to do so. - 2.0
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL)
  • Error_SampleIntervalTooSmall If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
Nodes. object R Per-node HPNA performance monitoring results. When automatic collection is enabled, i.e. SampleInterval is non-zero, the “current” interval is defined by the most recent automatic sample and the most recent subsequent manual sample, if any. When automatic collection is disabled, i.e. SampleInterval is zero, the “current” interval is defined by the three most recent manual samples. Note: Packets in statistics counters are Ethernet packets. - 2.0
CurrentStart dateTime R Start time for the current interval. When automatic collection is enabled, i.e. SampleInterval is non-zero, the current interval started at the most recent automatic sample. When automatic collection is disabled, i.e. SampleInterval is zero, the current interval started two manual samples ago. - 2.0
CurrentEnd dateTime R End time for the current interval. When automatic collection is enabled, i.e. SampleInterval is non-zero, the current interval ended at the most recent manual sample since the most recent automatic sample. If there has been no such manual sample, the current interval is empty. When automatic collection is disabled, i.e. SampleInterval is zero, the current interval ended at the most recent manual sample. - 2.0
NodeNumberOfEntries unsignedInt R {{numentries: not associated with a table}} This is the number of HPNA nodes for which performance monitoring results were collected during the current sample interval. - 2.0
Nodes.Node.{i}. object(1:) R

Per-node HPNA performance monitoring results during the current sample interval. Each table entry contains the results collected between an HPNA node (as indicated by MACAddress) and the local HPNA interface (as indicated by Interface). Note: Packet counters indicate the number of packets received between CurrentStart and CurrentEnd.

This table MUST contain at least 1 entry. This table’s Instance Numbers MUST be 1, 2, 3… (assigned sequentially without gaps).

At most one entry in this table can exist with a given value for MACAddress.

- 2.0
MACAddress string(:17) R [MACAddress] The MAC address of the HPNA node. - 2.0
BytesSent unsignedLong R The total number of bytes sent by host equipment for transmission on the HPNA interface. - 2.0
BytesReceived unsignedLong R The total number of received bytes on the HPNA interface destined for the host equipment. - 2.0
PacketsSent unsignedLong R The total number of packets sent by host equipment for transmission on the HPNA interface. Number includes also short error packets and control packets. - 2.0
PacketsReceived unsignedLong R The total number of good packets received on the HPNA interface destined for the host equipment. - 2.0
BroadcastPacketsSent unsignedLong R The number of broadcast packets transmitted on the HPNA interface. - 2.0
BroadcastPacketsReceived unsignedLong R The number of broadcast packets received on the HPNA interface. - 2.0
MulticastPacketsSent unsignedLong R The number of multicast packets transmitted on the HPNA interface. - 2.0
MulticastPacketsReceived unsignedLong R The number of multicast packets received on the HPNA interface. - 2.0
PacketsCrcErrored unsignedInt R The number of packets received on the HPNA interface with CRC errors. - 2.0
PacketsCrcErroredHost unsignedInt R The number of CRC error packets received on the HPNA interface destined for the host equipment. - 2.0
PacketsShortErrored unsignedInt R The number of packets received on the HPNA interface that are too short to be valid. - 2.0
PacketsShortErroredHost unsignedInt R The number packets sent by the host equipment that are too short to be valid. - 2.0
RxPacketsDropped unsignedInt R The number of received packets dropped due to lack of resources. - 2.0
TxPacketsDropped unsignedInt R The number packets sent by the host equipment for transmission on the HPNA interface but dropped due to lack of resources. - 2.0
ControlRequestLocal unsignedInt R The number of HPNA control request packets from local host. - 2.0
ControlReplyLocal unsignedInt R The number of HPNA control reply packets to local host. - 2.0
ControlRequestRemote unsignedInt R The number of HPNA control request packets from remote host. - 2.0
ControlReplyRemote unsignedInt R The number of HPNA control reply packets to remote host. - 2.0
PacketsSentWire unsignedLong R The total number of packets transmitted to wire. - 2.0
BroadcastPacketsSentWire unsignedLong R The total number of broadcast packets transmitted to wire. - 2.0
MulticastPacketsSentWire unsignedLong R The total number of multicast packets transmitted to wire. - 2.0
PacketsInternalControl unsignedInt R The number of HPNA control request packets from internal node. - 2.0
BroadcastPacketsInternalControl unsignedInt R The number of HPNA broadcast control request packets from internal node. - 2.0
PacketsReceivedQueued unsignedInt R The number of received packets queued on host output queues. - 2.0
PacketsReceivedForwardUnknown unsignedInt R The number of packets received and forwarded to unknown hosts. - 2.0
NodeUtilization unsignedInt(0:1000) R The node utilization (expressed in 0.1%). - 2.0
Channels. object R Per-channel HPNA performance monitoring results. Note: channels are unidirectional. - 2.0
TimeStamp dateTime R Time at which channel data was last collected. - 2.0
ChannelNumberOfEntries unsignedInt R {{numentries: not associated with a table}} This is the number of HPNA channels for which performance monitoring results have been collected. - 2.0
Channels.Channel.{i}. object(0:) R

Per-channel HPNA performance monitoring results.

This table’s Instance Numbers MUST be 1, 2, 3… (assigned sequentially without gaps).

At most one entry in this table can exist with the same values for both HostSrcMACAddress and HostDestMACAddress.

- 2.0
HostSrcMACAddress string(:17) R [MACAddress] The host source MAC address associated with the channel. - 2.0
HostDestMACAddress string(:17) R [MACAddress] The host destination MAC address associated with the channel. - 2.0
HPNASrcMACAddress string(:17) R [MACAddress] The HPNA source MAC address associated with the channel. - 2.0
HPNADestMACAddress string(:17) R [MACAddress] The HPNA destination MAC address associated with the channel. - 2.0
PHYRate unsignedInt R Channel PHY rate (expressed in Mbps). - 2.0
BaudRate unsignedInt R PHY Baud rate (expressed in Kbaud). - 2.0
SNR unsignedInt R Channel actual SNR measured in receiver side (expressed in 0.1dB). - 2.0
PacketsSent unsignedInt R Number of packets sent in the channel. - 2.0
PacketsReceived unsignedInt R Pre-LARQ number of packets received in the channel. - 2.0
LARQPacketsReceived unsignedInt R Post-LARQ number of packets received in the channel. Valid only if LARQ is enabled. - 2.0
FlowSpec string(:256) R The value MUST be the Path Name of a row in the HPNA.Interface.{i}.QoS.FlowSpec. table. Identifies the FlowSpec associated with the channel. This parameter is only used for channels that correspond to egress traffic from the local HPNA interface. An empty string means that the channel is not associated with any specified flow specification in the QoS object. - 2.0
Device.MoCA. object R MoCA object that contains the Interface table [MoCAv1.0] [MoCAv1.1]. - 2.0
InterfaceNumberOfEntries unsignedInt R The number of entries in the Interface table. - 2.0
Device.MoCA.Interface.{i}. object(0:) R

MoCA interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each table entry models the PHY and MAC levels of a MoCA interface [MoCAv1.0] [MoCAv1.1].

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
Enable boolean W Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. - 2.0
Status string R

The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the interface entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.0
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.0
MACAddress string(:17) R [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. - 2.0
FirmwareVersion string(:64) R This interface’s firmware version. This parameter is based on mocaIfSoftwareVersion from [MOCA11-MIB]. - 2.0
MaxBitRate unsignedInt R The maximum MoCA PHY bit rate (expressed in Mbps). - 2.0
MaxIngressBW unsignedInt R The maximum bandwidth of this interface for flows onto the MoCA network in Mbps. This parameter is based on mocaIfMaxIngressNodeBw from [MOCA11-MIB]. - 2.0
MaxEgressBW unsignedInt R The maximum bandwidth of this interface for flows from the MoCA network in Mbps. This parameter is based on mocaIfMaxEgressNodeBw from [MOCA11-MIB]. - 2.0
HighestVersion string(:64) R

Identifies the highest MoCA version that this interface supports. This element MUST be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 1.0, where the components mean major.minor revision number. Possible patterns:

  • \d+(\.\d+)* This parameter is based on mocaIfMocaVersion from [MOCA11-MIB].
- 2.0
CurrentVersion string(:64) R

Identifies the MoCA version that the MoCA network is currently running. This element MUST be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 1.0, where the components mean major.minor revision number. Possible patterns:

  • \d+(\.\d+)* This parameter is based on mocaIfNetworkVersion from [MOCA11-MIB].
- 2.0
NetworkCoordinator unsignedInt R The Node ID of the current Network Coordinator (NC) for the MoCA network. This parameter is based on mocaIfNC from [MOCA11-MIB]. - 2.0
NodeID unsignedInt R The Node ID of this interface. This parameter is based on mocaIfNodeID from [MOCA11-MIB]. - 2.0
MaxNodes boolean R The maximum network node capability supported by the interface. If MaxNodes is true then the interface supports 16 nodes (the maximum for a MoCA 1.1 network). If MaxNodes is false then the interface supports 8 nodes (the maximum for a MoCA 1.0 network). - 2.0
PreferredNC boolean W Whether this interface is a preferred Network Coordinator (NC). This parameter is based on mocaIfPreferredNC from [MOCA11-MIB]. - 2.0
BackupNC unsignedInt R The Node ID of the backup Network Coordinator node. This parameter is based on mocaIfBackupNC from [MOCA11-MIB]. - 2.0
PrivacyEnabledSetting boolean W The configured privacy mode. This indicates whether link-layer security is enabled (true) or disabled (false) for network admission. The configured privacy setting MAY NOT match the current operational state (PrivacyEnabled), since this setting is only applied during network formation or admission. - 2.0
PrivacyEnabled boolean R Indicates whether link-layer security is enabled or disabled. This parameter is based on mocaIfPrivacyEnable from [MOCA11-MIB]. - 2.0
FreqCapabilityMask hexBinary(8) R Hexadecimal encoded 64-bit mask of supported frequencies. This is the bit map of the spectrum that the interface supports, and each bit represents 25 MHz of spectrum. The least significant bit of the rightmost character corresponds to 800MHz, which is the lowest frequency. For example, an interface that supports 1150 MHz through 1500 MHz would have a value of 0x000000001FFFC000. This parameter is based on mocaIfCapabilityMask from [MOCA11-MIB]. - 2.0
FreqCurrentMaskSetting hexBinary(8) W The configured hexadecimal encoded 64-bit mask of enabled frequencies for network admission. The configured frequencies MAY NOT match the current operational state (FreqCurrentMask), since this setting is only applied during network formation or admission. - 2.0
FreqCurrentMask hexBinary(8) R Hexadecimal encoded 64-bit mask of used frequencies. This is the bit map of the spectrum that can be used and is a subset of the FreqCapabilityMask. Each bit represents 25 MHz of spectrum. The least significant bit of the rightmost character corresponds to 800MHz, which is the lowest frequency. This parameter is based on mocaIfChannelMask from [MOCA11-MIB]. - 2.0
CurrentOperFreq unsignedInt R Current Operational Frequency. The RF frequency in Hz to which the MoCA interface is currently tuned. This parameter is only valid when Status is Up. This parameter is based on mocaIfRFChannel from [MOCA11-MIB]. - 2.0
LastOperFreq unsignedInt R Last Operational Frequency. The RF frequency in Hz to which the MoCA interface was tuned when last in the Up state. This parameter is based on mocaIfLOF from [MOCA11-MIB]. - 2.0
KeyPassphrase string(12:17) W

MoCA Password. The value consists of numeric characters (0-9). Possible patterns:

  • \d+ This parameter is based on mocaIfPassword from [MOCA11-MIB].

When read, this parameter returns an empty string, regardless of the actual value.

- 2.0
TxPowerLimit unsignedInt W Transmit Power attenuation in dB relative to the maximum transmit power. The MoCA interface SHOULD have Enable set to false for any change in this configuration. If the parameter is modified when Enable is true then this change might take several minutes to complete. This parameter is based on mocaIfTxPowerLimit from [MOCA11-MIB]. - 2.0
PowerCntlPhyTarget unsignedInt W Target PHY rate in Mbps for the power control algorithm. The MoCA interface SHOULD have Enable set to false for any change in this configuration. If the parameter is modified when Enable is true then this change might take several minutes to complete. This parameter is based on mocaIfPowerControlTargetRate from [MOCA11-MIB]. - 2.0
BeaconPowerLimit unsignedInt W Beacon Transmit Power attenuation in dB relative to the maximum transmit power. The MoCA interface SHOULD have Enable set to false for any change in this configuration. If the parameter is modified when Enable is true then this change might take several minutes to complete. This parameter is based on mocaIfBeaconPowerLimit from [MOCA11-MIB]. - 2.0
NetworkTabooMask hexBinary(8) R Hexadecimal encoded 64-bit mask of MoCA taboo channels identified for the home network. This is the bit map of the spectrum that the interface supports, and each bit represents 25 MHz of spectrum. The least significant bit of the rightmost character corresponds to 800MHz, which is the lowest frequency. This parameter is based on mocaIfTabooChannelMask from [MOCA11-MIB]. - 2.0
NodeTabooMask hexBinary(8) R Hexadecimal encoded 64-bit mask of supported frequencies. This is the bit map of the spectrum that the interface supports, and each bit represents 25 MHz of spectrum. The least significant bit of the rightmost character corresponds to 800MHz, which is the lowest frequency. This parameter is based on mocaIfNodeTabooChannelMask from [MOCA11-MIB]. - 2.0
TxBcastRate unsignedInt R The broadcast PHY transmit rate in Mbps for this interface. This parameter is based on mocaIfTxGcdRate from [MOCA11-MIB]. - 2.0
TxBcastPowerReduction unsignedInt R Transmit Power attenuation in dB relative to the maximum transmit power for broadcast transmissions. This parameter is based on mocaIfTxGcdPowerReduction from [MOCA11-MIB]. - 2.0
QAM256Capable boolean R Whether this interface supports the 256 QAM feature. This parameter is based on mocaIfQAM256Capable from [MOCA11-MIB]. - 2.0
PacketAggregationCapability unsignedInt(0:10) R The packet aggregation capability supported by the interface. Standard values are 0 (no support), 6 (6 packets) or 10 (10 packets). This parameter is based on mocaIfPacketsAggrCapability from [MOCA11-MIB]. - 2.0
AssociatedDeviceNumberOfEntries unsignedInt R The number of entries in the AssociatedDevice table. - 2.0
Device.MoCA.Interface.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.MoCA.Interface.{i}.QoS. object R The QoS object provides information on MoCA parameterized QoS for this interface [MoCAv1.1]. - 2.0
EgressNumFlows unsignedInt R The number of QoS flows that this interface has from the MoCA network. This parameter is based on mocaIfEgressNodeNumFlows from [MOCA11-MIB]. - 2.0
IngressNumFlows unsignedInt R The number of QoS flows that this interface has onto the MoCA network. This parameter is based on mocaIfIngressNodeNumFlows from [MOCA11-MIB]. - 2.0
FlowStatsNumberOfEntries unsignedInt R The number of entries in the FlowStats table. - 2.0
Device.MoCA.Interface.{i}.QoS.FlowStats.{i}. object(0:) R

The flow statistics table provides information on the MoCA parameterized QoS flows this interface has allocated onto the MoCA network.

At most one entry in this table can exist with a given value for FlowID.

- 2.0
FlowID unsignedInt R The flow ID used to identify a flow in the network. This parameter is based on mocaIfFlowID from [MOCA11-MIB]. - 2.0
PacketDA string(:17) R [MACAddress] The Destination Address (DA) for the packets in this flow. This parameter is based on mocaIfPacketDA from [MOCA11-MIB]. - 2.0
MaxRate unsignedInt R Maximum required rate in Kbps. This parameter is based on mocaIfPeakDataRate from [MOCA11-MIB]. - 2.0
MaxBurstSize unsignedInt R Maximum burst size. This parameter is based on mocaIfBurstSize from [MOCA11-MIB]. - 2.0
LeaseTime unsignedInt R Flow lease time (expressed in seconds). A LeaseTime of 0 means unlimited lease time. This parameter is based on mocaIfLeaseTime from [MOCA11-MIB]. - 2.0
LeaseTimeLeft unsignedInt R

Flow lease time remaining (expressed in seconds). If LeaseTime is 0 then a LeaseTimeLeft of 0 means unlimited lease time; otherwise, a LeaseTimeLeft of 0 means expired. This parameter is based on mocaIfLeaseTimeLeft from [MOCA11-MIB].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
FlowPackets unsignedInt R

The number of packets transmitted for this flow. This parameter is based on mocaIfTxPacketsFlow from [MOCA11-MIB].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.MoCA.Interface.{i}.AssociatedDevice.{i}. object(0:) R

This table contains information about other MoCA devices currently associated with this MoCA interface.

At most one entry in this table can exist with a given value for MACAddress.

- 2.0
MACAddress string(:17) R [MACAddress] The MAC address of the associated device’s MoCA interface. - 2.0
NodeID unsignedInt R The Node ID of this remote device. This parameter is based on mocaNodeIndex from [MOCA11-MIB]. - 2.0
PreferredNC boolean R Whether this remote device is a preferred Network Coordinator (NC). This parameter is based on mocaNodePreferredNC from [MOCA11-MIB]. - 2.0
HighestVersion string(:64) R

Identifies the highest MoCA version that this remote device supports. This element MUST be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 1.0, where the components mean major.minor revision number. Possible patterns:

  • \d+(\.\d+)* This parameter is based on mocaNodeMocaVersion from [MOCA11-MIB].
- 2.0
PHYTxRate unsignedInt R The PHY transmit rate (in Mbps) to this remote device. This parameter is based on mocaMeshTxRate from [MOCA11-MIB]. - 2.0
PHYRxRate unsignedInt R The PHY receive rate (in Mbps) from this remote device. - 2.0
TxPowerControlReduction unsignedInt R The reduction in transmitter level (in dB) due to power control. This parameter is based on mocaNodeTxPowerReduction from [MOCA11-MIB]. - 2.0
RxPowerLevel unsignedInt R

The power level (in dBm) received at the MoCA interface from this remote device. This parameter is based on mocaNodeRxPower from [MOCA11-MIB].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
TxBcastRate unsignedInt R The broadcast PHY transmit rate (in Mbps) from this remote device. This parameter is based on mocaNodeTxGcdRate from [MOCA11-MIB]. - 2.0
RxBcastPowerLevel unsignedInt R

The power level (in dBm) received at the MoCA interface from this remote device. This parameter is based on mocaNodeRxGcdPower from [MOCA11-MIB].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
TxPackets unsignedInt R

The number of packets transmitted to this remote device (Note: Includes Broadcast, Multicast and Unicast packets).

Value Change Notification requests for this parameter MAY be denied.

- 2.0
RxPackets unsignedInt R

The number of packets received from this remote device (Note: Includes Broadcast, Multicast and Unicast packets). This parameter is based on mocaNodeRxPackets from [MOCA11-MIB].

Value Change Notification requests for this parameter MAY be denied.

- 2.0
RxErroredAndMissedPackets unsignedInt R The number of errored and missed packets received from this remote device. This parameter is based on mocaNodeRxDrops from [MOCA11-MIB]. - 2.0
QAM256Capable boolean R Whether this remote device supports the 256 QAM feature. This parameter is based on mocaNodeQAM256Capable from [MOCA11-MIB]. - 2.0
PacketAggregationCapability unsignedInt(0:10) R The packet aggregation capability supported by the remote device. Standard values are 0 (no support), 6 (6 packets) or 10 (10 packets). This parameter is based on mocaNodePacketsAggrCapability from [MOCA11-MIB]. - 2.0
RxSNR unsignedInt R The signal to noise level (in dBm) received at this interface from this remote device. This parameter is based on mocaNodeSNR from [MOCA11-MIB]. - 2.0
Active boolean R Whether or not this remote device is currently present in the MoCA network. The ability to list inactive nodes is OPTIONAL. If the CPE includes inactive nodes in this table, Active MUST be set to false for each inactive node. The length of time an inactive node remains listed in this table is a local matter to the CPE. - 2.0
Device.Ghn. object R G.hn object that contains an Interface table for G.hn supported CPE. The ITU-T G.hn specifications [G.9960] and [G.9961] define Physical and MAC Layers for communication between two or more G.hn nodes in the home network over multiple wired media such as power line, phone line and coaxial cable. - 2.4
InterfaceNumberOfEntries unsignedInt R The number of entries in the Interface table. - 2.4
Device.Ghn.Interface.{i}. object(0:) R

G.hn interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each table entry models the PHY [G.9960] and MAC [G.9961] layers of a G.hn interface.

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.4
Enable boolean W Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. - 2.4
Status string R

The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.4
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.4
Name string(:64) R

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.4
LastChange unsignedInt R

The accumulated time in seconds since the interface entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.4
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.4
MACAddress string(:17) R [MACAddress] The MAC Address of the interface, denoted as node MAC address or REGID in [G.9961]. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. - 2.4
FirmwareVersion string(:64) R The firmware version of the interface. - 2.4
ConnectionType string R

This parameter was DEPRECATED because it has been replaced by MediumType. This parameter is OBSOLETED in 2.14.

Enumeration of:

  • Powerline
  • Phone
  • Coax
- 2.4
MaxTransmitRate unsignedInt R The maximum PHY data rate that the interface is capable of transmitting (expressed in Mbps). - 2.8
TargetDomainNames string(:32)[](:1024) W Comma-separated list (maximum number of characters 1024) of strings (maximum number of characters per item 32). Identifies the target domains configured by the user, as described in [Section 8.6.1/G.9961]. When registering or re-registering, the G.hn interface SHOULD try to register to one of these domains in the given order. - 2.4
DomainName string(:32) R This is the domain name to which the interface is currently registered. An empty string indicates that the interface is currently not registered. - 2.4
DomainNameIdentifier unsignedInt R The Domain Name Identifier, a shortened version of DomainName, denoted as DNI in [Section 8.6.11.2.1/G.9961]. - 2.4
DomainId unsignedInt R The Domain Identifier of the domain to which the interface is registered, denoted as DOD in [G.9961]. - 2.4
DeviceId unsignedInt R The Device Identifier assigned by the Domain Master, denoted as DEVICE_ID in [G.9961]. The value 0 indicates that the device is not currently registered. - 2.4
MaxBitRate unsignedInt R The maximum PHY bit rate supported by this interface (expressed in Mbps). - 2.4
NodeTypeDMCapable boolean R Indicates whether this interface has the capability to act as Domain Master in the G.hn domain. - 2.4
DMRequested boolean W Indicates a request to force the role of the G.hn interface to Domain Master (DM) for the G.hn domain it is connected to. The selection of the Domain Master follows the procedures described in [Clause 8.6.6/G.9961]. - 2.8
IsDM boolean R Indicates whether this G.hn interface is currently the Domain Master (DM) for the G.hn domain it is connected to, as described in [Clause 8.6/G.9961]. - 2.8
NodeTypeSCCapable boolean R Indicates whether this interface has the capability to act as Security Controller in the G.hn domain. - 2.4
SCRequested boolean W Indicates a request to force the role of the G.hn interface to Security Controller (SC) for the G.hn domain it is connected to. The selection of the Security Controller follows the procedures described in [Clause 9.2/G.9961]. - 2.8
IsSC boolean R Indicates whether this G.hn interface is currently the Security Controller (SC) for the G.hn domain it is connected to, as described in [Clause 9.2/G.9961]. - 2.8
StandardVersions string[] R Comma-separated list of strings. The standard versions that the interface supports. The list MUST have an even number of items. The first item of each pair represents an ITU-T G.hn Recommendation while the second element of each pair represents the amendment version of the indicated Recommendation that this interface supports (the value 0 corresponds to the base Recommendation). For example, to indicate support for the G.9960 base document and G.9961 amendment 1, the corresponding list would be “G9960,0,G9961,1”. - 2.8
MaxBandPlan unsignedInt R The largest bandplan that the interface can support, as defined in [Clause 8.8.5.5/G.9961]. - 2.8
MediumType string R

The medium type that the interface currently operates on. Refer to [Table 7-5/G.9962].

Enumeration of:

  • PowerLineBaseband
  • PhoneLineBaseband
  • CoaxBaseband
  • CoaxRF
  • PlasticOpticalFiber
- 2.8
TAIFG unsignedInt R The Acknowledgement InterFrame Gap, or TAIFG, as defined in [Clause 8.4/G.9961]. It is represented as multiples of 1.28 microseconds. - 2.8
NotchedAmateurRadioBands hexBinary(:2) W A bit map representing usage of international amateur bands (0 = masked, 1 = unmasked). The LSB represents the lowest band (1.8-2.0 MHz), the second LSB represents the second lowest band (3.5-4.0 MHz), and so on. The maximum value for this parameter is 0x03FF, i.e. it is a 10-bit quantity represented in 16 bits and the top 6 bits are always zero. International Radio amateur bands are described in [Table D-1/G.9964] and conveyed by the Domain Master in the Amateur radio band descriptor (see [Table 8-77/G.9961]). - 2.8
PHYThroughputDiagnosticsEnable string W Comma-separated list of DeviceIDs of nodes that need to enable their PHY throughput diagnostics mode. All devices that are enabled will participate in the G.hn network PHY throughput diagnostics process. - 2.8
PerformanceMonitoringDiagnosticsEnable string W Comma-separated list of DeviceIDs of nodes that need to enable their Performance Monitoring diagnostics mode on this node. All devices that are enabled will participate in the G.hn network Performance Monitoring diagnostics process. - 2.8
SMMaskedBandNumberOfEntries unsignedInt R The number of entries in the SMMaskedBand table. - 2.8
NodeTypeDMConfig boolean W Requests the interface to become the Domain Master in the G.hn domain. This parameter is valid only if NodeTypeDMCapable is true. Note that, if more than one node is configured to act as Domain Master, G.hn specifies a protocol to ensure only one device actually becomes DM. - 2.4
NodeTypeDMStatus boolean R Indicates whether the interface is acting as Domain Master (true) or not (false). See Note in NodeTypeDMConfig regarding the possibility of more than one node being configured with NodeTypeDMConfig = true. - 2.4
NodeTypeSCStatus boolean R Indicates whether the interface is acting as Security Controller (true) or not (false). - 2.4
AssociatedDeviceNumberOfEntries unsignedInt R The number of entries in the AssociatedDevice table. - 2.4
PSM unsignedInt[2:2][2:32] W Specifies the list of PSD shaping mask (PSM) breakpoints to be applied to the G.hn interface. Comma-separated list (2 to 32 items) of PSMBreak Point Index And Levels, with each list item consisting of the following. [PSMBreakPointIndexAndLevel] 1. The PSM breakpoint sub-carrier index in the range [0:4095], and
  1. the value of the level of the PSM at this sub-carrier expressed in 0.1 dBm/Hz with an offset of -140 dBm/Hz. Both values are represented as unsignedInt. [Clause 5.2/G.9964] defines limits on PSM breakpoint levels. The PSM level is 0.1*(the value of the level of the PSM) - 140 dBm/Hz. For example, a PSM defined by two breakpoints (subcarrier 450, PSM level -80 dBm/Hz) and (subcarrier 1050, PSM level -90 dBm/Hz) is represented by PSM [450,600],[1050,500] .
- 2.12
Device.Ghn.Interface.{i}.Stats. object R Throughput statistics for this interface at the different G.hn reference points described in [Clause 8.1/G.9961]. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.4
BytesSent unsignedLong R

[StatsCounter64] The total number of bytes transmitted out of the interface, including framing characters. More specifically, this is the total number of MPDU bytes transmitted or retransmitted by the node through a physical medium (i.e., PMI defined in [Clause 5.2.1/G.9960]), which correspond to data LPDUs (i.e., data packets) and framing overhead (e.g., LFH, LPH, LPCS defined in [Clause 8.1/G.9961]). It does not include transmitted bytes contributed by management LPDUs (i.e., management packets). Note: LPDUs in mixed LLC frame blocks are considered data LPDUs.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
BytesReceived unsignedLong R

[StatsCounter64] The total number of bytes received on the interface, including framing characters. More specifically, this is the total number of MPDU bytes received by the node through a physical medium, which correspond to data LPDUs and framing overhead. It does not include received bytes contributed by management LPDUs. It can include blocks with errors. Note: LPDUs in mixed LLC frame blocks are considered data LPDUs.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
PacketsSent unsignedLong R

[StatsCounter64] The total number of packets transmitted out of the interface. More specifically, this is the total number of APDUs requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]) that were transmitted by the node through the physical medium. It does not include transmitted LCDUs.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
PacketsReceived unsignedLong R

[StatsCounter64] The total number of packets received on the interface. More specifically, this is the total number of APDUs delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) that were received by the node through the physical medium. It does not include received LCDUs.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
ErrorsSent unsignedInt R

[StatsCounter32] The total number of outbound packets that could not be transmitted because of errors. More specifically, this is the total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]) but could not be transmitted because of errors (e.g., APDUs containing CRC errors).

Value Change Notification requests for this parameter MAY be denied.

- 2.4
ErrorsReceived unsignedInt R

[StatsCounter32] The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. More specifically, this is the total number of received APDUs that contained errors preventing them from being delivered to a higher layer (i.e., inbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]). The possible causes of error are: incorrect CRC, incorrect MIC, incorrect MIC size, and incorrect size of packet.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
UnicastPacketsSent unsignedLong R

[StatsCounter64] The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent. More specifically, this is the total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a unicast address at this layer. It includes APDUs that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
UnicastPacketsReceived unsignedLong R

[StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer. More specifically, this is the total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a unicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
DiscardPacketsSent unsignedInt R

[StatsCounter32] The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. More specifically, this is the total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) but chosen to be discarded even though no errors had been detected to prevent their being transmitted (e.g., buffer overflow).

Value Change Notification requests for this parameter MAY be denied.

- 2.4
DiscardPacketsReceived unsignedInt R

[StatsCounter32] The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space. More specifically, this is the total number of received APDUs that were chosen to be discarded even though no errors had been detected to prevent their being delivered.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
MulticastPacketsSent unsignedLong R

[StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent. More specifically, this is the total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a multicast address at this layer. It includes APDUs that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
MulticastPacketsReceived unsignedLong R

[StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer. More specifically, this is the total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
BroadcastPacketsSent unsignedLong R

[StatsCounter64] The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent. More specifically, this is the total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a broadcast address at this layer. It includes APDUs that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
BroadcastPacketsReceived unsignedLong R

[StatsCounter64] The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer. More specifically, this is the total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
UnknownProtoPacketsReceived unsignedInt R

[StatsCounter32] The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol. More specifically, this is the total number of APDUs received by the management that were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
MgmtBytesSent unsignedLong R

[StatsCounter64] The total number of MPDU bytes transmitted by the node through a physical medium, which correspond to management LPDUs and framing overhead.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
MgmtBytesReceived unsignedLong R

[StatsCounter64] The total number of MPDU bytes received by the node through a physical medium, which correspond to management LPDUs and framing overhead.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
MgmtPacketsSent unsignedLong R

[StatsCounter64] The total number of LCDUs requested for transmission by a management layer (i.e., outbound LCDUs generated in LLC defined in [Clause 8.1.3/G.9961]) that were transmitted by the node through a physical medium.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
MgmtPacketsReceived unsignedLong R

[StatsCounter64] The total number of LCDUs delivered to a management layer (i.e., inbound LCDUs) that were received by the node through a physical medium.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
BlocksSent unsignedLong R

[StatsCounter64] The total number of LPDUs that were transmitted by the node through a physical medium, regardless of new or retransmitted LPDUs.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
BlocksReceived unsignedLong R

[StatsCounter64] The total number of LPDUs that were received by the node through a physical medium, with or without errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
BlocksResent unsignedInt R

[StatsCounter32] The total number of LPDUs that were retransmitted.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
BlocksErrorsReceived unsignedInt R

[StatsCounter32] The total number of received LPDUs that contained errors. Note the following relationships hold:

  • PacketsSent + ErrorsSent + DiscardPacketsSent = UnicastPacketsSent + MulticastPacketsSent + BroadcastPacketsSent.
  • PacketsReceived = UnicastPacketsReceived + MulticastPacketsReceived + BroadcastPacketsReceived.
  • Retransmission rate = BlocksResent / BlocksSent.
  • Block error rate = BlocksErrorReceived / BlocksReceived.

Value Change Notification requests for this parameter MAY be denied.

- 2.8
Device.Ghn.Interface.{i}.AssociatedDevice.{i}. object(0:) R

This table contains information about other G.hn devices connected to this G.hn interface.

At most one entry in this table can exist with a given value for MACAddress.

- 2.4
MACAddress string(:17) R [MACAddress] MAC address of remote G.hn device. This is denoted as REGID in [G.9961]. - 2.4
DeviceId unsignedInt R Device Id (as defined in G.hn) for the remote G.hn device, denoted as DEVICE_ID in [G.9961]. - 2.4
TxPhyRate unsignedInt R

The PHY transmit Rate (expressed in Mbps) to this remote device, denoted as PHY data rate in [G.9961]. Refer to Note 1 of [Table 8-48/G.9961]. To convert from the value in the table, divide by 32K (32768) and round down.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
RxPhyRate unsignedInt R

The PHY receive Rate (expressed in Mbps) from this remote device, denoted as PHY data rate in [G.9961]. Refer to Note 1 of [Table 8-48/G.9961]. To convert from the value in the table, divide by 32K (32768) and round down.

Value Change Notification requests for this parameter MAY be denied.

- 2.4
Active boolean R Whether or not this device is currently present in the G.hn domain. The ability to list inactive nodes is OPTIONAL. If the CPE includes inactive nodes in this table, Active MUST be set to false for each inactive node. The length of time an inactive node remains listed in this table is a local matter to the CPE. If Active is true, it indicates that the Status of the remote device is 0, 1, or 2 (see [Table 7-3/G.9961]). - 2.4
Device.Ghn.Interface.{i}.DMInfo. object R This object specifies management parameters pertaining to the domain functionality (Domain Master function; see [Clause 8.6/G.9961]). The object exists only on G.hn interfaces that are currently the Domain Master, i.e. for which parameter IsDM is true. - 2.8
DomainName hexBinary(:32) W This is the domain name to which the interface is currently registered. An empty string indicates that the interface is currently not registered. - 2.8
DomainNameIdentifier hexBinary(:2) R The Domain Name Identifier, a shortened version of DomainName, denoted as DNI in [Section 8.6.11.2.1/G.9961]. - 2.8
DomainId unsignedInt R The Domain Identifier of the domain to which the interface is registered, denoted as DOD in [G.9961]. - 2.8
MACCycleDuration unsignedInt(0,10:200) W The MAC cycle duration, as specified in [Clause 8.4/G.9961]. It is represented as multiples of 0.5 msec. In the case of power line, writing to this parameter has no effect and it reads back as 0, which is a special value indicating that the MAC cycle is synchronized with 2 AC cycles as defined in [Clause 8.6.3.1/G.9961]. - 2.8
SCDeviceId unsignedInt W The DEVICE_ID of the Security Controller selected by the Domain Master. - 2.8
SCMACAddress string(:17) W [MACAddress] The REGID of the Security Controller selected by the Domain Master. - 2.8
ReregistrationTimePeriod unsignedInt(5:63) W The time interval for periodic re-registration, as specified in [Clause 8.8.5.8/G.9961]. It is represented as multiples of 2 seconds. - 2.8
TopologyPeriodicInterval unsignedInt(0:255) W The time interval that a node sends out the periodic topology update using TM_NodeTopologyChange.ind message, as specified in [Clause 8.8.5.8.1/G.9961]. It is represented as multiples of 0.1 sec. The special value 0 represents an infinite interval (i.e., no periodic topology update). - 2.8
MinSupportedBandplan unsignedInt W Indicates the value of the minimal bandplan capability for a node that is allowed to register to the domain. - 2.8
MaxSupportedBandplan unsignedInt W Indicates the value of the minimal bandplan capability for a node that is allowed to register to the domain. - 2.8
Device.Ghn.Interface.{i}.SCInfo. object R This object specifies management parameters pertaining to the Security Controller functionality (Security Controller function; see [Clause 9.2/G.9961]). The object exists only on G.hn interfaces that are currently the Security Controller, i.e. for which parameter IsSC is true. - 2.8
ModesSupported string[] R

Comma-separated list of strings. The security modes that the Security Controller can support. Refer to [Clause 9.2/G.9961].

Each list item is an enumeration of:

  • NN (Node-to-Node)
  • NMK (Network Membership Key)
- 2.8
ModeEnabled string W The value MUST be a member of the list reported by the ModesSupported parameter, or else be Disabled. The security mode in which the Security Controller is operating. - 2.8
MICSize string W

The selected MIC size used in the domain.

Enumeration of:

  • 4-byte MIC
  • 8-byte MIC
  • 16-byte MIC
- 2.8
Location boolean R Indicates whether the Security Controller is above the L1 reference point. It is set to true if the Security Controller is above the L1 reference point, and set to false otherwise. - 2.8
Device.Ghn.Interface.{i}.SMMaskedBand.{i}. object(0:32) W

Specifies the list of masked bands to be applied to the G.hn interface. This information is conveyed by the Domain Master in the SM descriptor as specified in [Table 8-77/G.9961]. Instances of this object are expected to exist only on G.hn interfaces that are currently the Domain Master, i.e. for which parameter IsDM is true.

This table MUST contain at least 0 and at most 32 entries.

At most one entry in this table can exist with a given value for BandNumber. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for BandNumber such that the new entry does not conflict with any existing entries.

- 2.8
Enable boolean W Enables or disables the SMMaskedBand. - 2.8
BandNumber unsignedInt W

The masked band number.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

- 2.8
StartSubCarrier unsignedInt W Index of the lowest frequency sub-carrier in the band to be masked as specified in [Table 8-79/G.9961]. This parameter is writable only on the interface which acts as the Domain Master. - 2.8
StopSubCarrier unsignedInt W Index of the highest frequency sub-carrier in the band to be masked as specified in Table 8-79 in [G.9961]. This parameter is writable only on the interface which acts as the Domain Master. - 2.8
Device.Ghn.Diagnostics. object R The G.hn Diagnostics object. - 2.8
PHYThroughput() command - [ASYNC] G.hn PHY throughput diagnostics configuration and results. When diagnostics are requested, all G.hn nodes for which the Interface.{i}.PHYThroughputDiagnosticsEnable parameter is set enter PHY diagnostics mode. - 2.12
⇒ Input. arguments - Input arguments. -
Interface string W The value MUST be the Path Name of a row in the Ghn.Interface. table. The interface over which the test is to be performed. - 2.8
DiagnoseMACAddress string(:17) W [MACAddress] The MAC address of the originating G.hn interface of the link that is being diagnosed. Note: This MAC address might belong to another node of the domain. - 2.8
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL) If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
Result.{i}. object(0:) R

PHY throughput diagnostics results.

This table’s Instance Numbers MUST be 1, 2, 3… (assigned sequentially without gaps).

At most one entry in this table can exist with a given value for DestinationMACAddress.

- 2.8
DestinationMACAddress string(:17) R [MACAddress] MAC address of the destination node of the link being measured. - 2.8
LinkState string R

Indicates the state of the link between the G.hn Interface with MAC address DiagnoseMACAddress and the G.hn Interface with MAC address DestinationMACAddress.

Enumeration of:

- 2.8
TxPhyRate unsignedInt R PHY data rate in transmit direction in the link between the G.hn Interface with MAC address DiagnoseMACAddress and the G.hn Interface with MAC address DestinationMACAddress. It is represented in Mbps as defined in Note 1 to [Table 8-48/G.9961]. To convert from the value in the table, divide by 32K (32768) and round down. - 2.8
RxPhyRate unsignedInt R PHY data rate in receive direction in the link between the G.hn Interface with MAC address DiagnoseMACAddress and the G.hn Interface with MAC address DestinationMACAddress. It is represented in Mbps as defined in Note 1 to [Table 8-48/G.9961]. To convert from the value in the table, divide by 32K (32768) and round down. - 2.8
PerformanceMonitoring() command - [ASYNC] G.hn Performance Monitoring diagnostics configuration and results. When diagnostics are requested, all G.hn nodes for which the Interface.{i}.PerformanceMonitoringDiagnosticsEnable parameter is set enter PHY diagnostics mode. - 2.12
⇒ Input. arguments - Input arguments. -
Interface string W The value MUST be the Path Name of a row in the Ghn.Interface. table. The interface over which the test is to be performed. - 2.8
DiagnoseMACAddress string(:17) W [MACAddress] The MAC address of the originating G.hn interface of the link that is being diagnosed. Note: This MAC address might belong to another node of the domain. - 2.8
SampleInterval unsignedInt W Time in seconds between automatic collection of performance monitoring data. A value of zero disables automatic collection of data. The node MAY impose a minimum sample interval, in which case an attempt to set a (non-zero) interval that is less than this minimum MUST set the interval to the minimum and MUST NOT be regarded as an error. If SampleInterval is a simple fraction of a day, e.g. 900 (a quarter of an hour) or 3600 (an hour), the device MAY choose to align sample intervals with time of day, but is not required to do so. - 2.8
SNRGroupLength unsignedInt(1,2,4,8,16,32,64,128,256) W The number of sub-carriers in a group to be used for averaging SNR values when providing SNR information for a channel. - 2.8
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL) If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
Nodes. object R Per-node G.hn performance monitoring results. When automatic collection is enabled, i.e. SampleInterval is non-zero, the “current” interval is defined by the most recent automatic sample and the most recent subsequent manual sample, if any. When automatic collection is disabled, i.e. SampleInterval is zero, the “current” interval is defined by the three most recent manual samples. Note: Packets in statistics counters are Ethernet packets. - 2.8
CurrentStart dateTime R Start time for the current interval. When automatic collection is enabled, i.e. SampleInterval is non-zero, the current interval started at the most recent automatic sample. When automatic collection is disabled, i.e. SampleInterval is zero, the current interval started two manual samples ago. - 2.8
CurrentEnd dateTime R End time for the current interval. When automatic collection is enabled, i.e. SampleInterval is non-zero, the current interval ended at the most recent manual sample since the most recent automatic sample. If there has been no such manual sample, the current interval is empty. When automatic collection is disabled, i.e. SampleInterval is zero, the current interval ended at the most recent manual sample. - 2.8
NodeNumberOfEntries unsignedInt R {{numentries: not associated with a table}} This is the number of G.hn nodes for which performance monitoring results were collected during the current sample interval. - 2.8
Nodes.Node.{i}. object(1:) R

Per-node G.hn performance monitoring results during the current sample interval. Each table entry contains the results collected between the G.hn nodes with MAC addresses DiagnoseMACAddress) and DestinationMACAddress). Note: Packet counters indicate the number of packets received between CurrentStart and CurrentEnd.

This table MUST contain at least 1 entry. This table’s Instance Numbers MUST be 1, 2, 3… (assigned sequentially without gaps).

At most one entry in this table can exist with a given value for DestinationMACAddress.

- 2.8
DestinationMACAddress string(:17) R [MACAddress] MAC address of the destination node of the link being measured. - 2.8
BytesSent unsignedLong R [StatsCounter64] The total number of MPDU bytes transmitted or retransmitted by the node through a physical medium (i.e., PMI defined in [Clause 5.2.1/G.9960]), which correspond to data LPDUs (i.e., data packets) and framing overhead (e.g., LFH, LPH, LPCS defined in [Clause 8.1/G.9961]). It does not include transmitted bytes contributed by management LPDUs (i.e., management packets). Note: LPDUs in mixed LLC frame blocks are considered data LPDUs. - 2.8
BytesReceived unsignedLong R [StatsCounter64] The total number of MPDU bytes received by the node through a physical medium, which correspond to data LPDUs and framing overhead. It does not include received bytes contributed by management LPDUs. It might include blocks with errors. Note: LPDUs in mixed LLC frame blocks are considered data LPDUs. - 2.8
PacketsSent unsignedLong R [StatsCounter64] The total number of APDUs requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]) that were transmitted by the node through the physical medium. It does not include transmitted LCDUs. - 2.8
PacketsReceived unsignedLong R [StatsCounter64] The total number of APDUs delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) that were received by the node through the physical medium. It does not include received LCDUs. - 2.8
ErrorsSent unsignedInt R [StatsCounter32] The total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]). This parameter represents the total number of LCDUs requested for transmission by a management layer (i.e., outbound LCDUs generated in LLC defined in in [Clause 8.1.3/G.9961]) that were transmitted by the node through a physical medium) but could not be transmitted because of errors (e.g., APDUs containing CRC errors). - 2.8
ErrorsReceived unsignedInt R [StatsCounter32] The total number of received APDUs that contained errors preventing them from being delivered to a higher layer (i.e., inbound APDUs at the x1 reference point defined in [Clause 5.2.1/G.9960]). The possible causes of error are: incorrect CRC, incorrect MIC, incorrect MIC size, and incorrect size of packet. - 2.8
UnicastPacketsSent unsignedLong R [StatsCounter64] The total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a unicast address at this layer. It includes APDUs that were discarded or not sent. - 2.8
UnicastPacketsReceived unsignedLong R [StatsCounter64] The total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a unicast address at this layer. - 2.8
DiscardPacketsSent unsignedInt R [StatsCounter32] The total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) but chosen to be discarded even though no errors had been detected to prevent their being transmitted (e.g., buffer overflow). - 2.8
DiscardPacketsReceived unsignedInt R [StatsCounter32] The total number of received APDUs that were chosen to be discarded even though no errors had been detected to prevent their being delivered. - 2.8
MulticastPacketsSent unsignedLong R [StatsCounter64] The total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a multicast address at this layer. It includes APDUs that were discarded or not sent. - 2.8
MulticastPacketsReceived unsignedLong R [StatsCounter64] The total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a multicast address at this layer. - 2.8
BroadcastPacketsSent unsignedLong R [StatsCounter64] The total number of APDUs that were requested for transmission by a higher layer (i.e., outbound APDUs at the x1 reference point) and which were addressed to a broadcast address at this layer. It includes APDUs that were discarded or not sent. - 2.8
BroadcastPacketsReceived unsignedLong R [StatsCounter64] The total number of received APDUs that were delivered to a higher layer (i.e., inbound APDUs at the x1 reference point) and which were addressed to a broadcast address at this layer. - 2.8
UnknownProtoPacketsReceived unsignedInt R [StatsCounter32] The total number of APDUs received by the management that were discarded because of an unknown or unsupported protocol. - 2.8
MgmtBytesSent unsignedLong R [StatsCounter64] The total number of MPDU bytes transmitted by the node through a physical medium, which correspond to management LPDUs and framing overhead. - 2.8
MgmtBytesReceived unsignedLong R [StatsCounter64] The total number of MPDU bytes received by the node through a physical medium, which correspond to management LPDUs and framing overhead. - 2.8
MgmtPacketsSent unsignedLong R [StatsCounter64] The total number of LCDUs requested for transmission by a management layer (i.e., outbound LCDUs generated in LLC defined in [Clause 8.1.3/G.9961]) that were transmitted by the node through a physical medium. - 2.8
MgmtPacketsReceived unsignedLong R [StatsCounter64] The total number of LCDUs delivered to a management layer (i.e., inbound LCDUs) that were received by the node through a physical medium. - 2.8
BlocksSent unsignedLong R [StatsCounter64] The total number of LPDUs that were transmitted by the node through a physical medium, regardless of new or retransmitted LPDUs. - 2.8
BlocksReceived unsignedLong R [StatsCounter64] The total number of LPDUs that were received by the node through a physical medium, with or without errors. - 2.8
BlocksResent unsignedInt R [StatsCounter32] The total number of LPDUs that were retransmitted. - 2.8
BlocksErrorsReceived unsignedInt R [StatsCounter32] The total number of received LPDUs that contained errors. Note the following relationships hold:
  • PacketsSent + ErrorsSent + DiscardPacketsSent = UnicastPacketsSent + MulticastPacketsSent + BroadcastPacketsSent.
  • PacketsReceived = UnicastPacketsReceived + MulticastPacketsReceived + BroadcastPacketsReceived.
  • Retransmission rate = BlocksResent / BlocksSent.
  • Block error rate = BlocksErrorReceived / BlocksReceived.
- 2.8
Channels. object R Per-channel G.hn performance monitoring results. Note: channels are unidirectional. - 2.8
TimeStamp dateTime R Time at which channel data was last collected. - 2.8
ChannelNumberOfEntries unsignedInt R {{numentries: not associated with a table}} - 2.8
Channels.Channel.{i}. object(0:) R

Per-channel G.hn performance monitoring results during the current sample interval. Each table entry contains the results collected from the channel between a G.hn interface (as indicated by DiagnoseMACAddress) and a G.hn interface indicated by DestinationMACAddress)

This table’s Instance Numbers MUST be 1, 2, 3… (assigned sequentially without gaps).

At most one entry in this table can exist with a given value for DestinationMACAddress.

- 2.8
DestinationMACAddress string(:17) R [MACAddress] MAC address of the destination node of the link being measured. - 2.8
SNR unsignedInt[] R Comma-separated list of unsigned integers. The result of an SNR test performed over the channel. It is formatted as a comma-separated list of N/M unsigned integers that represents the result of Signal-to-Noise-Ratio measurement averaging in groups of M subcarriers. The number N depends on the bandplan used by the node and corresponds to the OFDM control parameter N of each medium as defined in [G.9964]. The number M corresponds to the parameter SNRGroupLength. - 2.8
Device.HomePlug. object R HomePlug object that contains the Interface table. The HomePlug industry standard [HPAV1.1] defines peer to peer communication over powerline medium. - 2.0
InterfaceNumberOfEntries unsignedInt R The number of entries in the Interface table. - 2.0
Device.HomePlug.Interface.{i}. object(0:) R

HomePlug interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each table entry models the PHY and MAC levels of a HomePlug interface [HPAV1.1].

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
Enable boolean W Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. - 2.0
Status string R

The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the interface entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.0
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.0
MACAddress string(:17) R [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. - 2.0
LogicalNetwork string(:64) W The textual name of the HomePlug Logical Network. - 2.0
Version string(:16) R

Indicates the HomePlug version of the interface. This element SHOULD be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example:

“1.0”
“1.1”
- 2.0
FirmwareVersion string(:64) R The firmware version of the interface. - 2.0
ForceCCo boolean W

Central Coordinator (CCo) selection mode. If false, CCo selection is automatic. If true, the local HomePlug interface is forced to be CCo and all other devices in the Logical Network MUST be set to automatic CCo selection. Typically ForceCCo is set to automatic CCo selection (false).

The factory default value MUST be false.

- 2.0
NetworkPassword string(:32) W

The network password of the device. This is a human readable ASCII string that is hashed per the HomePlug specification to generate the Network Membership Key (NMK). Note that care needs to be taken when setting this parameter as it might prohibit communication with other adapters or equipment connected via the powerline network.

When read, this parameter returns an empty string, regardless of the actual value.

- 2.0
OtherNetworksPresent string[](:64) R

Comma-separated list (maximum number of characters 64) of strings. Indicates whether any other HomePlug networks are currently visible via this interface. Examples of valid list items include, but are not limited to:

“HomePlugAV”
“HomePlug1.0”
“Other”
- 2.0
MaxBitRate unsignedInt R The maximum PHY bit rate supported by this interface (expressed in Mbps). - 2.0
AssociatedDeviceNumberOfEntries unsignedInt R The number of entries in the AssociatedDevice table. - 2.0
Device.HomePlug.Interface.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MPDUTxAck unsignedLong R HomePlug-specific statistic. The Number of MAC Protocol Data Units (MPDUs) Transmitted and Acknowledged. - 2.0
MPDUTxCol unsignedLong R HomePlug-specific statistic. The Number of MAC Protocol Data Units (MPDUs) Transmitted and Collided - 2.0
MPDUTxFailed unsignedLong R HomePlug-specific statistic. The Number of MAC Protocol Data Units (MPDUs) Transmitted and Failed - 2.0
MPDURxAck unsignedLong R HomePlug-specific statistic. The Number of MAC Protocol Data Units (MPDUs) Received and Acknowledged - 2.0
MPDURxFailed unsignedLong R HomePlug-specific statistic. The Number of MAC Protocol Data Units (MPDUs) Received and Failed - 2.0
Device.HomePlug.Interface.{i}.AssociatedDevice.{i}. object(0:) R

This table contains information about other HomePlug devices connected to this HomePlug interface.

At most one entry in this table can exist with a given value for MACAddress.

- 2.0
MACAddress string(:17) R [MACAddress] MAC address of remote HomePlug device. It is used to uniquely identify and easily correlate with the connected remote HomePlug device. - 2.0
TxPhyRate unsignedInt R The PHY transmit Rate (expressed in Mbps) to this remote device. - 2.0
RxPhyRate unsignedInt R The PHY receive Rate (expressed in Mbps) from this remote device. - 2.0
SNRPerTone unsignedInt[:1155]() R Comma-separated list (up to 1155 items) (length ) of unsigned integers. List items indicate Signal to Noise Ratio (SNR) per tone from this remote device (expressed in 0.1dB). - 2.0
AvgAttenuation unsignedInt R Average attenuation from this remote device (expressed in 0.1dB). - 2.0
EndStationMACs string(:17)[:16]() R [MACAddress] Comma-separated list (up to 16 items) (length ) of MAC Addresses. List items represent MAC addresses of end stations bridged by the remote HomePlug device. For example: “11:22:33:AA:BB:CC, 22:33:44:DD:EE:66” - 2.0
Active boolean R Whether or not this device is currently present in the HomePlug network. The ability to list inactive nodes is OPTIONAL. If the CPE includes inactive nodes in this table, Active MUST be set to false for each inactive node. The length of time an inactive node remains listed in this table is a local matter to the CPE. - 2.0
Device.UPA. object R Universal Powerline Association [UPA-PLC]. This object contains the Interface and Diagnostics objects. - 2.0
InterfaceNumberOfEntries unsignedInt R The number of entries in the Interface table. - 2.0
Device.UPA.Interface.{i}. object(0:) R

UPA interface table (a stackable interface object as described in [Section 4.2/TR-181i2]). Each table entry models the PHY and MAC levels of a UPA interface [UPA-PLC].

At most one entry in this table can exist with a given value for Alias, or with a given value for Name.

- 2.0
Enable boolean W Enables or disables the interface. This parameter is based on ifAdminStatus from [RFC2863]. - 2.0
Status string R

The current operational state of the interface (see [Section 4.2.2/TR-181i2]). Enumeration of:

  • Up
  • Down
  • Unknown
  • Dormant
  • NotPresent
  • LowerLayerDown
  • Error (OPTIONAL) When Enable is false then Status SHOULD normally be Down (or NotPresent or Error if there is a fault condition on the interface). When Enable is changed to true then Status SHOULD change to Up if and only if the interface is able to transmit and receive network traffic; it SHOULD change to Dormant if and only if the interface is operable but is waiting for external actions before it can transmit and receive network traffic (and subsequently change to Up if still operable when the expected actions have completed); it SHOULD change to LowerLayerDown if and only if the interface is prevented from entering the Up state because one or more of the interfaces beneath it is down; it SHOULD remain in the Error state if there is an error or other fault condition detected on the interface; it SHOULD remain in the NotPresent state if the interface has missing (typically hardware) components; it SHOULD change to Unknown if the state of the interface can not be determined for some reason. This parameter is based on ifOperStatus from [RFC2863].
- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Name string(:64) R

The textual name of the interface as assigned by the CPE.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

- 2.0
LastChange unsignedInt R

The accumulated time in seconds since the interface entered its current operational state.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
LowerLayers string[](:1024) W Comma-separated list (maximum number of characters 1024) of strings. Each list item MUST be the Path Name of an interface object that is stacked immediately below this interface object, or an empty string. See [Section 4.2.1/TR-181i2]. Note: Since Interface is a layer 1 interface, it is expected that LowerLayers will not be used. - 2.0
Upstream boolean R Indicates whether the interface points towards the Internet (true) or towards End Devices (false). For example:
  • For an Internet Gateway Device, Upstream will be true for all WAN interfaces and false for all LAN interfaces.
  • For a standalone WiFi Access Point that is connected via Ethernet to an Internet Gateway Device, Upstream will be true for the Ethernet interface and false for the WiFi Radio interface.
  • For an End Device, Upstream will be true for all interfaces.
- 2.0
MACAddress string(:17) R [MACAddress] The MAC Address of the interface. Note: This is not necessarily the same as the Ethernet header source or destination MAC address, which is associated with the IP interface and is modeled via the Ethernet.Link.{i}.MACAddress parameter. - 2.0
FirmwareVersion string(:64) R This interface’s firmware version. - 2.0
MaxBitRate unsignedInt R The maximum PHY bit rate supported by this interface (expressed in Mbps). - 2.0
NodeType string W

Type of UPA device role. It can be Fixed Access Point (master) or End Point (slave) of the PLC network. Enumeration of:

  • AP
  • EP
- 2.0
LogicalNetwork string(:20) W The name (network ID) of the logical PLC network in which the local interface is a member (human readable string). - 2.0
EncryptionMethod string(:6) W

Encryption Method used by UPA device. Enumeration of:

  • None
  • DES
  • 3DES
  • AES128
  • AES256
- 2.0
EncryptionKey string(:36) W

Encryption key for secure PLC communications. This a human readable string used by the system to generate the encryption key to encrypt communications in powerline. It takes non extended ASCII characters (i.e. printable 7-bit ASCII character codes 32-126, which includes SPACE but excludes TAB, LF and CR). For example: bvjPekZiYUf9kjNKJASkgJ09adfoP01Fjvgd

When read, this parameter returns an empty string, regardless of the actual value.

- 2.0
PowerBackoffEnabled boolean W Power back-off management feature status in the UPA device. Boolean can be true for “enabled” and false for “disabled”. - 2.0
PowerBackoffMechanismActive boolean R Show if power back-off mechanism is active at that time in the UPA device. Boolean can be true for “active” and false for “not active”. - 2.0
EstApplicationThroughput unsignedInt R The estimated application throughput (expressed in Mbps), received from the PLC link. This value can be used to indicate link quality. - 2.0
ActiveNotchEnable boolean W Enables or disables the ActiveNotch table for this interface. - 2.0
ActiveNotchNumberOfEntries unsignedInt R The number of entries in the ActiveNotch table. - 2.0
AssociatedDeviceNumberOfEntries unsignedInt R The number of entries in the AssociatedDevice table. - 2.0
BridgeForNumberOfEntries unsignedInt R The number of entries in the BridgeFor table. - 2.0
Device.UPA.Interface.{i}.Stats. object R Throughput statistics for this interface. The CPE MUST reset the interface’s Stats parameters (unless otherwise stated in individual object or parameter descriptions) either when the interface becomes operationally down due to a previous administrative down (i.e. the interface’s Status parameter transitions to a down state after the interface is disabled) or when the interface becomes administratively up (i.e. the interface’s Enable parameter transitions from false to true). Administrative and operational interface status is discussed in [Section 4.2.2/TR-181i2]. - 2.0
BytesSent unsignedLong R

The total number of bytes transmitted out of the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BytesReceived unsignedLong R

The total number of bytes received on the interface, including framing characters.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsSent unsignedLong R

The total number of packets transmitted out of the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
PacketsReceived unsignedLong R

The total number of packets received on the interface.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsSent unsignedInt R

The total number of outbound packets that could not be transmitted because of errors.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
ErrorsReceived unsignedInt R

The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsSent unsignedLong R

The total number of packets requested for transmission which were not addressed to a multicast or broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnicastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were not addressed to a multicast or broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsSent unsignedInt R

The total number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
DiscardPacketsReceived unsignedInt R

The total number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being delivered. One possible reason for discarding such a packet could be to free up buffer space.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a multicast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MulticastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a multicast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsSent unsignedLong R

The total number of packets that higher-level protocols requested for transmission and which were addressed to a broadcast address at this layer, including those that were discarded or not sent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
BroadcastPacketsReceived unsignedLong R

The total number of received packets, delivered by this layer to a higher layer, which were addressed to a broadcast address at this layer.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
UnknownProtoPacketsReceived unsignedInt R

The total number of packets received via the interface which were discarded because of an unknown or unsupported protocol.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
Device.UPA.Interface.{i}.AssociatedDevice.{i}. object(0:) R

This table contains information about PLC connections running between this UPA interface and other UPA devices.

At most one entry in this table can exist with a given value for MACAddress.

- 2.0
MACAddress string(:17) R [MACAddress] Remote UPA device MAC address. - 2.0
Port unsignedInt(0:65535) R The PLC port number. - 2.0
LogicalNetwork string(:20) R The name of the logical PLC network (human readable string). In the case where the associated device belongs to a different powerline network than the UPA interface, the actual network identifier of the neighboring network is not shown in LogicalNetwork. Rather, only a generic string, e.g. “Network 1”, “Network 2”, etc is stored here due to security/privacy implications. - 2.0
PhyTxThroughput unsignedInt R Physical transmission throughput (in Mbps). - 2.0
PhyRxThroughput unsignedInt R Physical reception throughput (in Mbps). - 2.0
RealPhyRxThroughput unsignedInt R Real Physical reception throughput (in Mbps). - 2.0
EstimatedPLR unsignedInt(0:100) R Estimated PDU Loss Rate measurement between two devices (i.e. estimated percent of MPDUs that have been received with errors). - 2.0
MeanEstimatedAtt unsignedInt R Mean estimated attenuation (i.e. channel loss between the local interface and the remote device). It is measured in dB. - 2.0
SmartRouteIntermediatePLCMAC string(:17) R [MACAddress] Intermediate UPA adapter MAC address of the device that is acting as a relay to increase coverage in mesh scenarios. This is the MAC address of a third UPA device, with which the UPA interface is doing smart repeating in order to transmit data to the associated MACAddress UPA device. SmartRouteIntermediatePLCMAC will be empty when DirectRoute is true. - 2.0
DirectRoute boolean R Route status, where true indicates direct and false indicates indirect. - 2.0
Active boolean R Whether or not this node is currently present in the UPA network. The ability to list inactive nodes is OPTIONAL. If the CPE includes inactive nodes in this table, Active MUST be set to false for each inactive node. The length of time an inactive node remains listed in this table is a local matter to the CPE. - 2.0
Device.UPA.Interface.{i}.ActiveNotch.{i}. object(0:) W

This object contains the list of active notches of the UPA interface. A UPA device can have notches in its spectrum, where no power is transmitted in a given part of the spectrum. These notches are typically located in amateur radio bands, to avoid interference. Note: All ActiveNotch entries can be enabled/disabled as a group using the ActiveNotchEnable parameter.

At most one entry in this table can exist with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries.

- 2.0
Enable boolean W Enables or disables the active notch entry. false 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

If the value isn’t assigned by the Controller on creation, the Agent MUST choose an initial value that doesn’t conflict with any existing entries.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
StartFreq unsignedInt W The initial frequency (in kHz) of a notch enabled in the spectrum of the local interface. - 2.0
StopFreq unsignedInt W The final frequency (in kHz) of a notch enabled in the spectrum of the local interface. - 2.0
Depth unsignedInt W The depth (in dB) of a notch enabled in the spectrum of the local interface. - 2.0
Device.UPA.Interface.{i}.BridgeFor.{i}. object(0:) R

This object represents the bridge table of the UPA interface. Each instance is a bridge table entry. It shows the MAC addresses of the remote UPA devices with their associated port number, and the MAC addresses of the end-devices (PCs, STBs, routers, etc) connected to Ethernet port of the powerline adapters with their associated logical port. In this way the system identifies to which UPA device an external device is connected to.

At most one entry in this table can exist with a given value for Alias, or with a given value for MACAddress.

- 2.0
Alias string(:64) W

[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference.

The following mandatory constraints MUST be enforced:

  • The value MUST NOT be empty.
  • The value MUST start with a letter.
  • If the value is not assigned by the Controller at creation time, the Agent MUST assign a value with an “cpe-” prefix.

This is a non-functional key and its value MUST NOT change once it’s been assigned by the Controller or set internally by the Agent.

Value Change Notification requests for this parameter MAY be denied.

- 2.0
MACAddress string(:17) R [MACAddress] MAC address of the device. - 2.0
Port unsignedInt(0:65535) R Internal bridge associated port. - 2.0
Device.UPA.Diagnostics. object R The UPA Diagnostics object. - 2.0
InterfaceMeasurement() command - [ASYNC] This command provides access to either a Signal-to-Noise-Ratio (SNR) Port Measurement test or a Channel Frequency Response (CFR) Port Measurement test. The Type parameter is used to select which type of test to perform. CFR and SNR measurements are done between a two UPA devices (a local interface and a remote device belonging to the same network). - 2.12
⇒ Input. arguments - Input arguments. -
Type string W

Indicates the type of port measurement test to be carried out. Enumeration of:

  • SNR (Signal-to-Noise-Ratio)
  • CFR (Channel Frequency Response) .
- 2.0
Interface string(:256) W The value MUST be the Path Name of a row in the UPA.Interface. table. This is the local UPA interface from which the test is to be performed. - 2.0
Port unsignedInt(0:65535) W PLC port being measured. This identifies which PLC connection to measure between the local interface (indicated by Interface) and the remote device (implied by Port). - 2.0
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL)
  • Error_InvalidPort If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
Measurements unsignedInt[:1536]() R Comma-separated list (up to 1536 items) (length ) of unsigned integers. Result of Signal-to-Noise-Ratio measurement (if Type is SNR) or Channel Frequency Response measurement (if Type is CFR). List items indicate measurements per carrier for a PLC port (expressed in 0.1dB). - 2.0
RxGain int R Reception gain of the adapter (expresssed in dB). - 2.0
Device.WiFi. object R The WiFi object is based on the WiFi Alliance 802.11 specifications ([802.11-2007]). It defines interface objects (Radio and SSID), and application objects (AccessPoint and EndPoint). - 2.7
RadioNumberOfEntries unsignedInt R The number of entries in the Radio table. - 2.0
SSIDNumberOfEntries unsignedInt R The number of entries in the SSID table. - 2.0
AccessPointNumberOfEntries unsignedInt R The number of entries in the AccessPoint table. - 2.0
EndPointNumberOfEntries unsignedInt R The number of entries in the EndPoint table. - 2.0
ResetCounter unsignedInt R [StatsCounter32] This parameter counts the number of WiFi host or driver resets since the last device reset. This parameter is reset to zero after the device resets, and increments with each successive WiFi host or driver reset. - 2.12
ResetCause string R

Reports the cause for the previous Wi-Fi driver reset.

Enumeration of:

  • HostReinit (Indicates that the host processor intentionally performed the reset. This can be due to an external instruction)
  • SpontaneousInterrupt (Indicates that the reset was spontaneous. This can be due to an error condition)
  • LossOfPower (Indicates that the reset was due to a loss of mains power on the device)
- 2.14
NeighboringWiFiDiagnostic() command - [ASYNC] This command defines access to other WiFi SSIDs that this device is able to receive. - 2.12
⇐ Output. arguments - Output arguments. -
Status string R

Indicates the availability of diagnostics data. Enumeration of:

  • Canceled (OPTIONAL)
  • Complete
  • Error (OPTIONAL) If the value of this parameter is anything other than Complete, the values of the other results parameters for this test are indeterminate.
- 2.13
Result.{i}. object(0:) R

Neighboring SSID table. This table models the other WiFi SSIDs that this device is able to receive.

This table’s Instance Numbers MUST be 1, 2, 3… (assigned sequentially without gaps).

At most one entry in this table can exist with a given value for BSSID.

- 2.7
Radio string R The value MUST be the Path Name of a row in the Device.WiFi.Radio. table. The Radio that detected the neighboring WiFi SSID. - 2.7
SSID string(:32) R The current service set identifier in use by the neighboring WiFi SSID. The value MAY be empty for hidden SSIDs. - 2.7
BSSID string(:17) R [MACAddress] The BSSID used for the neighboring WiFi SSID. - 2.7
Mode string R

The mode the neighboring WiFi radio is operating in.

Enumeration of:

  • AdHoc
  • Infrastructure
- 2.7
Channel unsignedInt(1:255) R The current radio channel used by the neighboring WiFi radio. - 2.7
SignalStrength int(-200:0) R An indicator of radio signal strength (RSSI) of the neighboring WiFi radio measured in dBm, as an average of the last 100 packets received. - 2.7
SecurityModeEnabled string R

The type of encryption the neighboring WiFi SSID advertises. The WEP value indicates either WEP-64 or WEP-128. The WPA value is the same as WPA-Personal. The WPA2 value is the same as WPA2-Personal. The WPA-WPA2 value is the same as WPA-WPA2-Personal. The WPA3-SAE value is the same as WPA3-Personal. The WPA2-PSK-WPA3-SAE value is the same as WPA3-Personal-Transition.

Enumeration of:

  • None
  • WEP
  • WPA
  • WPA2
  • WPA-WPA2
  • WPA-Enterprise
  • WPA2-Enterprise
  • WPA-WPA2-Enterprise
  • WPA3-SAE
  • WPA2-PSK-WPA3-SAE
  • WPA3-Enterprise
- 2.7
EncryptionMode string[] R

Comma-separated list of strings. The type of encryption the neighboring WiFi SSID advertises. When SecurityModeEnabled is one of WPA3-SAE, WPA2-PSK-WPA3-SAE, or WPA3-Enterprise, TKIP is not valid, and should not be in the list.

Each list item is an enumeration of:

  • TKIP
  • AES
- 2.7
OperatingFrequencyBand string R

Indicates the frequency band at which the radio this SSID instance is operating.

Enumeration of:

  • 2.4GHz
  • 5GHz
- 2.7
SupportedStandards string[] R

Comma-separated list of strings. List items indicate which IEEE 802.11 standards this Result instance can support simultaneously, in the frequency band specified by OperatingFrequencyBand. Each list item is an enumeration of:

- 2.7
OperatingStandards string[] R Each list item MUST be a member of the list reported by the SupportedStandards parameter. Comma-separated list of strings. List items indicate which IEEE 802.11 standard that is detected for this Result. Each value indicates support for the indicated standard. If OperatingFrequencyBand is set to 2.4GHz, only values b, g, n, ax are allowed. If OperatingFrequencyBand is set to 5GHz, only values a, n, ac, ax are allowed. For example, a value of “g,b” (or “b,g” - order is not important) means that the 802.11g standard [802.11g-2003] is used with a backwards-compatible mode for 802.11b [802.11b-1999]. A value of “g” means that only the 802.11g standard can be used. - 2.7
OperatingChannelBandwidth string R

Indicates the bandwidth at which the channel is operating.

Enumeration of:

  • 20MHz
  • 40MHz
  • 80MHz
  • 160MHz
  • Auto
- 2.7
BeaconPeriod unsignedInt R Time interval (in ms) between transmitting beacons. - 2.7
Noise int(-200:0) R Indicator of average noise strength (in dBm) received from the neighboring WiFi radio. - 2.7
BasicDataTransferRates string[](:256) R Comma-separated list (maximum number of characters 256) of strings. Basic data transmit rates (in Mbps) for the SSID. For example, if BasicDataTransferRates is “1,2”, this indicates that the SSID is operating with basic rates of 1 Mbps and 2 Mbps. - 2.7
SupportedDataTransferRates string[](:256) R Comma-separated list (maximum number of characters 256) of strings. Data transmit rates (in Mbps) for unicast frames at which the SSID will permit a station to connect. For example, if SupportedDataTransferRates is “1,2,5.5”, this indicates that the SSID will only permit connections at 1 Mbps, 2 Mbps and 5.5 Mbps. - 2.7
DTIMPeriod unsignedInt R The number of beacon intervals that elapse between transmission of Beacon frames containing a TIM element whose DTIM count field is 0. This value is transmitted in the DTIM Period field of beacon frames. [802.11-2012] - 2.7
Reset() command - This parameter represents a request to reset or reboot the WiFi sub-system without resetting or rebooting the device. - 2.12
Device.WiFi.MultiAP. object R This object describes a Wi-Fi network containing 1 or more Access Point devices. This object is related to a Wi-Fi network that contains multiple Access Points (Multi-AP) and utilizes software logic to optimize that Wi-Fi network (typically via steering STAs, also known as Associated Devices, to the best Access Point). This object exposes the view of the Wi-Fi netwtork from the perspective of the Multi-AP Controller. The Wi-Fi Alliance EasyMesh solution is one example of managing a Multi-AP network. - 2.13
APDeviceNumberOfEntries unsignedInt R The number of entries in the APDevice table. - 2.13
Device.WiFi.MultiAP.SteeringSummaryStats. object R The summary of statistics related to Multi-AP Steering for the Wi-Fi network. The counters contained in SteeringSummaryStats are all reset on reboot. - 2.13
NoCandidateAPFailures unsignedLong R [StatsCounter64] Number of times Associated Devices should have been steered but weren’t because a better candidate AP couldn’t be found. - 2.13
BlacklistAttempts unsignedLong R [StatsCounter64] Number of times a Blacklist steer was attempted. - 2.13
BlacklistSuccesses unsignedLong R [StatsCounter64] Number of times an attempted Blacklist steer succeeded. - 2.13
BlacklistFailures unsignedLong R [StatsCounter64] Number of times an attempted Blacklist steer failed. - 2.13
BTMAttempts unsignedLong R [StatsCounter64] Number of times a BTM (BSS Transition Management; 802.11k) steer was attempted. - 2.13
BTMSuccesses unsignedLong R [StatsCounter64] Number of times an attempted BTM (BSS Transition Management; 802.11k) steer succeeded. - 2.13
BTMFailures unsignedLong R [StatsCounter64] Number of times an attempted BTM (BSS Transition Management; 802.11k) steer failed. - 2.13
BTMQueryResponses unsignedLong R [StatsCounter64] Number of asynchronous BTM (BSS Transition Management; 802.11k) Queries for which a BTM Request was issued. - 2.13
Device.WiFi.MultiAP.APDevice.{i}. object(0:) R

Each instance of this object represents an individual Access Point device in the Wi-Fi network.

At most one entry in this table can exist with a given value for MACAddress.

- 2.13
MACAddress string(:17) R [MACAddress] A unique identifier for this particular device within the Wi-Fi network. - 2.13
Manufacturer string R The manufacturer of the Access Point device (human readable string). - 2.13
ManufacturerOUI string(6) R

Organizationally unique identifier of the Access Point device manufacturer. Represented as a six hexadecimal-digit value using all upper-case letters and including any leading zeros. Possible patterns:

  • [0-9A-F]{6} The value MUST be a valid OUI as defined in [OUI]. This value MUST remain fixed over the lifetime of the device, including across firmware updates.
- 2.13
ProductClass string(:64) R Identifier of the class of product for which the serial number applies. That is, for a given manufacturer, this parameter is used to identify the product or class of product over which the SerialNumber parameter is unique. This value MUST remain fixed over the lifetime of the device, including across firmware updates. - 2.13
SerialNumber string(:64) R Identifier of the particular Access Point device that is unique for the indicated class of product and manufacturer. This value MUST remain fixed over the lifetime of the device, including across firmware updates. - 2.13
SoftwareVersion string(:64) R A string identifying the software version currently installed in the Access Point device (i.e. version of the overall firmware). To allow version comparisons, this element SHOULD be in the form of dot-delimited integers, where each successive integer represents a more minor category of variation. For example, 3.0.21 where the components mean: Major.Minor.Build. - 2.13
LastContactTime dateTime R The last time that the Access Point device was contacted via the Multi-AP control protocol. - 2.13
AssocIEEE1905DeviceRef string R The value MUST be the Path Name of a row in the IEEE1905.AL.NetworkTopology.IEEE1905Device. table. If the referenced object is deleted, the parameter value MUST be set to an empty string. AssocIEEE1905DeviceRef is a reference to the IEEE 1905.1 Network Topology Device. Since IEEE 1905.1 is a common protocol used by Multi-AP Controllers for communications, this parameter allows the MultiAP portion of the data model to reference the associated IEEE 1905.1 portion of the data model. - 2.13
BackhaulLinkType string R

The medium being used to backhaul this Access Point Device to the Multi-AP Controller. The None value is reserved for the APDevice instance that represents the Multi-AP Controller. Enumeration of:

  • None
  • Wi-Fi
  • MoCA
  • Ethernet
  • G.hn
  • HPNA
  • HomePlug
  • UPA
- 2.13
BackhaulMACAddress string(:17) R [MACAddress] The MAC Address of the Device on the network that is providing a Backhaul Link for this Access Point Device. The an empty string value is reserved for the APDevice instance that represents the Multi-AP Controller. - 2.13
BackhaulBytesSent unsignedLong R [StatsCounter64] The total number of bytes transmitted across the backhaul medium (as identified by the value of the BackhaulLinkType parameter), including framing characters. - 2.13
BackhaulBytesReceived unsignedLong R [StatsCounter64] The total number of bytes received across the backhaul medium (as identified by the value of the BackhaulLinkType parameter), including framing characters. - 2.13
BackhaulLinkUtilization unsignedInt(:100) R Current utilization (expressed in %) of the medium (as identified by the value of the BackhaulLinkType parameter) being used to backhaul this Access Point device to the Multi-AP Controller. A value of 0 is used for the APDevice instance that represents the Access Point on the Multi-AP Controller. - 2.13
BackhaulSignalStrength unsignedInt(:255) R An indicator of radio signal strength of the backhaul link of the Access Point (AP) to the Multi-AP Controller, measured in dBm. RCPI threshold is encoded per Table 9-154 of [802.11-2016]. The value of this parameter is indeterminate if the value of the BackhaulLinkType parameter is anything other than Wi-Fi. - 2.13
RadioNumberOfEntries unsignedInt R The number of entries in the Radio table. - 2.13
RadarDetections unsignedInt[](:1024) R Comma-separated list (maximum number of characters 1024) of unsigned integers. List items represent channels in the non-occupancy list due to radars detected by Dynamic Frequency Selection (DFS) Channel Availability Check (CAC). - 2.14
DFSEnable boolean W Enables or disables Dynamic Frequency Selection (DFS). - 2.14
Device.WiFi.MultiAP.APDevice.{i}.Radio.{i}. object(0:) R

This object represents all of the individual Radios contained within the identified Access Point device known to the controller.

At most one entry in this table can exist with a given value for MACAddress.

- 2.13
MACAddress string(:17) R [MACAddress] A unique identifier for this particular Radio within the identified Access Point. - 2.13
OperatingFrequencyBand string R

Indicates the frequency band at which the radio is operating. Enumeration of:

  • 2.4GHz
  • 5GHz
- 2.13
OperatingStandards string[] R

Comma-separated list of strings. List items indicate which IEEE 802.11 standard this Radio instance is configured for. Each list item is an enumeration of:

- 2.13
Channel unsignedInt(1:255) W The current radio channel used by the connection. To request automatic channel selection, set Device.WiFi.Radio.{i}.AutoChannelEnable to true. Whenever Device.WiFi.Radio.{i}.AutoChannelEnable is true, the value of the Channel parameter MUST be the channel selected by the automatic channel selection procedure. For channels in “wide mode” (where a channel bandwidth strictly greater than 20 MHz is used), this parameter is used for Primary Channel only. The secondary or extension channel information is available through ExtensionChannel. Note: Valid Channel values depend on the OperatingFrequencyBand value specified and the regulatory domain. - 2.13
ExtensionChannel string R

The secondary extension channel position, applicable when operating in wide channel mode (i.e. when CurrentOperatingChannelBandwidth is 40MHz If not operating in wide channel mode (i.e. when CurrentOperatingChannelBandwidth is something other than 40MHz, then the value of ExtensionChannel is None. Enumeration of:

  • None
  • AboveControlChannel
  • BelowControlChannel
- 2.13
PossibleChannels string[](:1024) R Comma-separated list (maximum number of characters 1024) of strings. List items represent possible radio channels for the wireless standard (a, b, g, n, ac, ax) and the regulatory domain. Ranges in the form “n-m” are permitted. For example, for 802.11b and North America, would be “1-11”. - 2.14
CurrentOperatingChannelBandwidth string R

The channel bandwidth currently in use. Enumeration of:

  • 20MHz
  • 40MHz
  • 80MHz
  • 160MHz
- 2.13
MCS int(0:15,16:31) R The Modulation Coding Scheme index (applicable to 802.11n and 802.11ac specifications only). Values from 0 to 15 MUST be supported ([802.11n-2009]). Values from 0 to 9 MUST be supported for [802.11ac-2013]. - 2.13
TransmitPower int(-1:100) R Indicates the current transmit power level as a percentage of full power. - 2.13
TransmitPowerLimit int(-90:36) W Indicates the maximum Effective Isotropic Radiated Power (EIRP) per 20 MHz bandwidth representing the nominal transmit power limit for this radio. The field is coded in units of dBm relative to 1 mW. [Clause 17.2.15/MAPv1.0] - 2.14
APNumberOfEntries unsignedInt R The number of entries in the AP table. - 2.13
Device.WiFi.MultiAP.APDevice.{i}.Radio.{i}.AP.{i}. object(0:) R

A single logical Access Point operating on this radio.

At most one entry in this table can exist with a given value for BSSID.

- 2.13
BSSID string(:17) R [MACAddress] The MAC Address of the logical BSS (BSSID). - 2.13
SSID string R The SSID in use for this BSS. - 2.13
BlacklistAttempts unsignedLong R [StatsCounter64] Number of times a Blacklist steer was attempted for this Access Point. Blacklist steering is the process of forcing a connected STA to move to another Access Point by temporarily blocking its access to the current Access Point. - 2.13
BTMAttempts unsignedLong R [StatsCounter64] Number of times a BTM (BSS Transition Management; 802.11k) steer was attempted for this Access Point. - 2.13
BTMQueryResponses unsignedLong R [StatsCounter64] Number of asynchronous BTM (BSS Transition Management; 802.11k) Queries for which a BTM Request was issued by this Access Point. - 2.13
AssociatedDeviceNumberOfEntries unsignedInt R The number of entries in the AssociatedDevice table. - 2.13
Device.WiFi.MultiAP.APDevice.{i}.Radio.{i}.AP.{i}.AssociatedDevice.{i}. object(0:) R

Object describing a single Associated Device (STA).

At most one entry in this table can exist with a given value for MACAddress.

- 2.13
MACAddress string(:17) R [MACAddress] The MAC address of an associated device. - 2.13
OperatingStandard string R

The operating standard that this associated device is connected with. Enumeration of:

- 2.13
Active boolean R Whether or not this associated device is currently present on the Wi-Fi Access Point device. The ability to list inactive nodes is OPTIONAL. If the Access Point devices includes inactive nodes in this table, Active MUST be set to false for each inactive node. The length of time an inactive node remains listed in this table is a local matter to the CPE. - 2.13
AssociationTime dateTime R Date and time in UTC when the device was associated. - 2.13
LastDataDownlinkRate unsignedInt R The data transmit rate in kbps that was most recently used for transmission of data from the access point to the associated device. - 2.13
LastDataUplinkRate unsignedInt R The data transmit rate in kbps that was most recently used for transmission of data from the associated device to the access point. - 2.13
SignalStrength unsignedInt(:255) R An indicator of radio signal strength of the uplink from the Associated Device (STA) to the Access Point (AP) measured in dBm. RCPI threshold is encoded per Table 9-154 of [802.11-2016]. - 2.13
Noise unsignedInt(:255) R An indicator of the average radio noise plus interference power measured on the uplink from the Associated Device (STA) to the Access Point (AP). Encoded as defined for ANPI in [Section 10.11.9.4/802.11-2016]. - 2.13
SteeringHistoryNumberOfEntries unsignedInt R The number of entries in the SteeringHistory table. - 2.13
Device.WiFi.MultiAP.APDevice.{i}.Radio.{i}.AP.{i}.AssociatedDevice.{i}.Stats. object R Object describing the Statistics for a single Associated Device (STA). - 2.13
BytesSent unsignedLong R [StatsCounter64] The total number of bytes transmitted to the Associated Device. - 2.13
BytesReceived unsignedLong R [StatsCounter64] The total number of bytes received from the Associated Device. - 2.13
PacketsSent unsignedLong R [StatsCounter64] The total number of packets transmitted to the Associated Device. - 2.13
PacketsReceived unsignedLong R [StatsCounter64] The total number of packets received from the Associated Device. - 2.13
ErrorsSent unsignedLong R [StatsCounter64] The total number of outbound packets that could not be transmitted because of errors. These might be due to the number of retransmissions exceeding the retry limit, or from other causes. - 2.13
ErrorsReceived unsignedLong R [StatsCounter64] The total number of inbound packets that contained errors preventing them from being delivered to a higher-layer protocol. - 2.13
RetransCount unsignedLong R [StatsCounter64] The total number of transmitted packets which were retransmissions. Two retransmissions of the same packet results in this counter incrementing by two. - 2.13
Device.WiFi.MultiAP.APDevice.{i}.Radio.{i}.AP.{i}.AssociatedDevice.{i}.SteeringSummaryStats. object R The summary of statistics related to Multi-AP Steering for an individual STA on the Wi-Fi network. The counters contained in SteeringSummaryStats are all reset on reboot. - 2.13
NoCandidateAPFailures unsignedLong R [StatsCounter64] Number of times this Associated Device should have been steered but wasn’t because a better candidate AP couldn’t be found. - 2.13
BlacklistAttempts unsignedLong R [StatsCounter64] Number of times a Blacklist steer was attempted on this Associated Device. - 2.13
BlacklistSuccesses unsignedLong R [StatsCounter64] Number of times an attempted Blacklist steer succeeded for this Associated Device. - 2.13
BlacklistFailures unsignedLong R [StatsCounter64] Number of times an attempted Blacklist steer failed for this Associated Device. - 2.13
BTMAttempts unsignedLong R [StatsCounter64] Number of times a BTM (BSS Transition Management; 802.11k) steer was attempted on this Associated Device. - 2.13
BTMSuccesses unsignedLong R [StatsCounter64] Number of times an attempted BTM (BSS Transition Management; 802.11k) steer succeeded for this Associated Device. - 2.13
BTMFailures unsignedLong R [StatsCounter64] Number of times an attempted BTM (BSS Transition Management; 802.11k) steer failed for this Associated Device. - 2.13
BTMQueryResponses unsignedLong R [StatsCounter64] Number of asynchronous BTM (BSS Transition Management; 802.11k) Queries for which a BTM Request was issued to this Associated Device. - 2.13
LastSteerTime unsignedInt R The number of seconds since this Associated Device was last attempted to be steered. - 2.13
Device.WiFi.MultiAP.APDevice.{i}.Radio.{i}.AP.{i}.AssociatedDevice.{i}.SteeringHistory.{i}. object(0:) R

The history of Multi-AP Steering for an individual STA on the Wi-Fi network. The contents of this multi-instance object are reset on reboot.

At most one entry in this table can exist with the same values for all of Time, APOrigin and APDestination.

- 2.13
Time dateTime R The date/time when steering was initiated for the Associated Device. - 2.13
APOrigin string R The BSSID of the Access Point that initiated the steering. - 2.13
TriggerEvent string R

The type of event that caused the steering to be initiaited. Enumeration of:

  • Unknown
  • Wi-Fi Channel Utilization
  • Wi-Fi Link Quality
  • Backhaul Link Utilization NOTE: This might be Unknown for BTM Query Response steers.
- 2.13
SteeringApproach string R

The type of steering that was attempted. Enumeration of:

  • Blacklist
  • BTM Request
  • Async BTM Query
- 2.13
APDestination string R The BSSID of the destination Access Point of a successful steer. A failed steering attempt will leave this parameter an empty string. - 2.13
SteeringDuration unsignedInt R The amount of time in seconds required for the steer to complete successfully. A failed steering attempt will leave this parameter 0. - 2.13
Device.WiFi.DataElements. object R This object represents the Wi-Fi Alliance Data Elements as defined in [DataElements-v1.0]. - 2.13
Device.WiFi.DataElements.Network. object R This object describes a Wi-Fi network containing 1 or more Access Point devices. - 2.13
ID string W A unique identifier for this particular Wi-Fi network. - 2.13
TimeStamp string R The time this group was collected. - 2.13
ControllerID string W A unique identifier for a Multi-AP controller. - 2.13
DeviceNumberOfEntries unsignedInt R The number of entries in the Device table. - 2.13
Device.WiFi.DataElements.Network.Device.{i}. object(0:)