Queue management configuration object. The maximum number of entries available in the Classification table. {{numentries}} The maximum number of entries available in the {{object|App}} table. {{numentries}} The maximum number of entries available in the {{object|Flow}} table. {{numentries}} The maximum number of entries available in the {{object|Policer}} table. {{numentries}} The maximum number of entries available in the {{object|Queue}} table. {{numentries}} {{numentries}} The maximum number of entries available in the {{object|Shaper}} table. {{numentries}} The maximum number of entries available in the {{object|Scheduler}} table. {{numentries}} Identifier of the forwarding policy associated with traffic not associated with any specified classifier. Identifier of the traffic class associated with traffic not associated with any specified classifier. {{reference}} Indicates the ''Policer'' table entry for traffic not associated with any specified classifier. {{empty}} indicates a null policer. {{reference}} Indicates the ''Queue'' table entry for traffic not associated with any specified classifier. Note: The interpretation of {{empty}} value is implementation specific. DSCP to mark traffic not associated with any specified classifier. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of DSCP based upon the EthernetPriority value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Ethernet priority code (as defined in {{bibref|802.1Q-2011}}) to mark traffic not associated with any specified classifier. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Ethernet priority code (as defined in {{bibref|802.1Q-2011}}) to mark traffic of the inner VLAN Tag as defined in 802.1Q, when the PDU is not associated with any specified classifier. This parameter is only applicable when the PDU has 2 VLAN Tags. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. {{list}} List items represent URNs, each indicating a protocol supported for use as a ProtocolIdentifier in the App table. This list MAY include any of the URNs defined in {{bibref|TR-181i2|Annex A}} as well as other URNs defined elsewhere. Classification table. For enabled table entries, if {{param|Interface}} is not a valid reference and {{param|AllInterfaces}} is {{false}}, then the table entry is inoperable and the CPE MUST set {{param|Status}} to {{enum|Error_Misconfigured|Status}}. Several of this object's parameters specify DHCP option values. Some cases are version neutral (the parameter can apply to both DHCPv4 and DHCPv6), but in other cases the representation of the option is different for DHCPv4 and DHCPv6, so it is necessary to define separate DHCPv4-specific and DHCPv6-specific parameters. Therefore, an instance of this object that uses DHCP option values as classification criteria will be associated with either DHCPv4 or DHCPv6, as indicated by the {{param|DHCPType}} parameter. Enables or disables this classifier. The status of this classifier. {{enum}} The {{enum|Error_Misconfigured}} value indicates that a necessary configuration value is undefined or invalid. The {{enum|Error}} value MAY be used by the CPE to indicate a locally defined error condition. {{datatype|expand}} For each packet, the highest ordered entry that matches the classification criteria is applied. All lower order entries are ignored. The DHCP protocol associated with the {{object}} instance. Affects only parameters that specify DHCP option values as classification criteria (all such parameter descriptions note this fact). {{enum}} If {{param}} is {{enum|DHCPv4}}, then {{object}} parameters that are DHCPv6-specific are ignored. If {{param}} is {{enum|DHCPv6}}, then {{object}} parameters that are DHCPv4-specific are ignored. Classification criterion. {{reference}} This specifies the ingress interface associated with the entry. It MAY be a layer 1, 2 or 3 interface, however, the types of interfaces for which ''Classifications'' can be instantiated is a local matter to the CPE. Note that this parameter is permitted to reference ''Tunnel'' instances in order to classify upstream packets that have just been encapsulated (such packets are conceptually similar to locally-generated traffic). For example, this parameter might reference a {{object|##.GRE.Tunnel}} or a {{object|##.MAP.Domain}} instance. Classification criterion. This specifies that all ingress interfaces are associated with the entry. If {{true}}, the value of {{param|Interface}} is ignored since all ingress interfaces are indicated. Classification criterion. Classification criterion. Destination IP address. {{empty}} indicates this criterion is not used for classification. Destination IP address mask, represented as an IP routing prefix using CIDR notation [RFC4632]. The IP address part MUST be {{empty}} (and, if specified, MUST be ignored). If {{false}}, the class includes only those packets that match the (masked) DestIP entry, if specified. If {{true}}, the class includes all packets except those that match the (masked) DestIP entry, if specified. Classification criterion. Source IP address. {{empty}} indicates this criterion is not used for classification. Source IP address mask, represented as an IP routing prefix using CIDR notation [RFC4632]. The IP address part MUST be {{empty}} (and, if specified, MUST be ignored). If {{false}}, the class includes only those packets that match the (masked) {{param|SourceIP}} entry, if specified. If {{true}}, the class includes all packets except those that match the (masked) {{param|SourceIP}} entry, if specified. Classification criterion. Protocol number. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|Protocol}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|Protocol}} entry, if specified. Classification criterion. Destination port number. A value of -1 indicates this criterion is not used for classification. Classification criterion. If specified, indicates the classification criterion is to include the port range from {{param|DestPort}} through {{param}} (inclusive). If specified, {{param}} MUST be greater than or equal to {{param|DestPort}}. A value of -1 indicates that no port range is specified. If {{false}}, the class includes only those packets that match the {{param|DestPort}} entry (or port range), if specified. If {{true}}, the class includes all packets except those that match the {{param|DestPort}} entry (or port range), if specified. Classification criterion. Source port number. A value of -1 indicates this criterion is not used for classification. Classification criterion. If specified, indicates the classification criterion is to include the port range from {{param|SourcePort}} through {{param}} (inclusive). If specified, {{param}} MUST be greater than or equal to SourcePort. A value of -1 indicates that no port range is specified. If {{false}}, the class includes only those packets that match the {{param|SourcePort}} entry (or port range), if specified. If {{true}}, the class includes all packets except those that match the {{param|SourcePort}} entry (or port range), if specified. Classification criterion. Source MAC Address. {{empty}} indicates this criterion is not used for classification. Bit-mask for the MAC address, where matching of a packet's MAC address with the {{param|SourceMACAddress}} is only to be done for bit positions set to one in the mask. A mask of ''FF:FF:FF:FF:FF:FF'' or {{empty}} indicates all bits of the {{param|SourceMACAddress}} are to be used for classification. If {{false}}, the class includes only those packets that match the (masked) {{param|SourceMACAddress}} entry, if specified. If {{true}}, the class includes all packets except those that match the (masked) {{param|SourceMACAddress}} entry, if specified. Classification criterion. Destination MAC Address. {{empty}} indicates this criterion is not used for classification. The use of destination MAC address as a classification criterion is primarily useful only for bridged traffic. Bit-mask for the MAC address, where matching of a packet's MAC address with the {{param|DestMACAddress}} is only to be done for bit positions set to one in the mask. A mask of ''FF:FF:FF:FF:FF:FF'' or {{empty}} indicates all bits of the {{param|DestMACAddress}} are to be used for classification. If {{false}}, the class includes only those packets that match the (masked) {{param|DestMACAddress}} entry, if specified. If {{true}}, the class includes all packets except those that match the (masked) {{param|DestMACAddress}} entry, if specified. Classification criterion. Ethertype as indicated in either the Ethernet or SNAP Type header. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|Ethertype}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|Ethertype}} entry, if specified. Classification criterion. SSAP element in the LLC header. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|SSAP}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|SSAP}} entry, if specified. Classification criterion. DSAP element in the LLC header. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|DSAP}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|DSAP}} entry, if specified. Classification criterion. Control element in the LLC header. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|LLCControl}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|LLCControl}} entry, if specified. Classification criterion. OUI element in the SNAP header. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|SNAPOUI}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|SNAPOUI}} entry, if specified. Classification criterion. Used to identify one or more LAN devices, value of the DHCPv4 Vendor Class Identifier (Option 60) as defined in {{bibref|RFC2132}}, matched according to the criterion in {{param|SourceVendorClassIDMode}}. Case sensitive. This is a normal string, e.g. "abc" is represented as "abc" and not say "616263" hex. However, if the value includes non-printing characters then such characters have to be represented using XML escapes, e.g. #x0a for line-feed. {{empty}} indicates this criterion is not used for classification. Note: This parameter is DHCPv4-specific. It only applies when {{param|DHCPType}} is {{enum|DHCPv4|DHCPType}}. Classification criterion. A hexbinary string used to identify one or more LAN devices, value of the DHCPv6 Vendor Class Identifier (Option 16) as defined in {{bibref|RFC8415}}. The option value is binary, so an exact match is REQUIRED. {{empty}} indicates this criterion is not used for classification. Note: This parameter is DHCPv6-specific. It only applies when {{param|DHCPType}} is {{enum|DHCPv6|DHCPType}}. If {{false}}, the class includes only those packets sourced from LAN devices that match the {{param|SourceVendorClassID}} entry (for {{enum|DHCPv4|DHCPType}}) or the {{param|SourceVendorClassIDv6}} entry (for {{enum|DHCPv6|DHCPType}}), if specified. If {{true}}, the class includes all packets except those sourced from LAN devices that match the {{param|SourceVendorClassID}} entry (for {{enum|DHCPv4|DHCPType}}) or the {{param|SourceVendorClassIDv6}} entry (for {{enum|DHCPv6|DHCPType}}), if specified. SourceVendorClassID pattern match criterion. {{enum}} For example, if {{param|SourceVendorClassID}} is "Example" then an Option 60 value of "Example device" will match with {{param}} values of {{enum|Prefix}} or {{enum|Substring}}, but not with {{enum|Exact}} or {{enum|Suffix}}. Classification criterion. Used to identify one or more LAN devices, value of the DHCPv4 Vendor Class Identifier (Option 60) as defined in {{bibref|RFC2132}}, matched according to the criterion in {{param|DestVendorClassIDMode}}. Case sensitive. This is a normal string, e.g. "abc" is represented as "abc" and not say "616263" hex. However, if the value includes non-printing characters then such characters have to be represented using XML escapes, e.g. #x0a for line-feed. {{empty}} indicates this criterion is not used for classification. Note: This parameter is DHCPv4-specific. It only applies when {{param|DHCPType}} is {{enum|DHCPv4|DHCPType}}. Classification criterion. A hexbinary string used to identify one or more LAN devices, value of the DHCPv6 Vendor Class Identifier (Option 16) as defined in {{bibref|RFC8415}}. The option value is binary, so an exact match is REQUIRED. {{empty}} indicates this criterion is not used for classification. Note: This parameter is DHCPv6-specific. It only applies when {{param|DHCPType}} is {{enum|DHCPv6|DHCPType}}. If {{false}}, the class includes only those packets destined for LAN devices that match the {{param|DestVendorClassID}} entry (for {{enum|DHCPv4|DHCPType}}) or the {{param|DestVendorClassIDv6}} entry (for {{enum|DHCPv6|DHCPType}}), if specified. If {{true}}, the class includes all packets except those destined for LAN devices that match the {{param|DestVendorClassID}} entry (for {{enum|DHCPv4|DHCPType}}) or the {{param|DestVendorClassIDv6}} entry (for {{enum|DHCPv6|DHCPType}}), if specified. {{param|DestVendorClassID}} pattern match criterion. {{enum}} For example, if {{param|DestVendorClassID}} is "Example" then an Option 60 value of "Example device" will match with {{param}} values of {{enum|Prefix}} or {{enum|Substring}}, but not with {{enum|Exact}} or {{enum|Suffix}}. Classification criterion. A hexbinary string used to identify one or more LAN devices, value of the DHCP Client Identifier. The DHCP Client Identifier is Option 61 (as defined in {{bibref|RFC2132}}) for {{enum|DHCPv4|DHCPType}}, or is Option 1 (as defined in {{bibref|RFC8415}}) for {{enum|DHCPv6|DHCPType}}. The option value is binary, so an exact match is REQUIRED. {{empty}} indicates this criterion is not used for classification. Note: DHCPv4 Option values are limited to a length of 255, while DHCPv6 Option values can have a maximum length of 65535. Note: This parameter is DHCP version neutral. The specific DHCP version in use with this parameter is indicated by {{param|DHCPType}}. Note: DHCPv6 Option 1 (Client Identifier) is sometimes referred to as ''DUID''. If {{false}}, the class includes only those packets sourced from LAN devices that match the {{param|SourceClientID}} entry, if specified. If {{true}}, the class includes all packets except those sourced from LAN devices that match the {{param|SourceClientID}} entry, if specified. Classification criterion. A hexbinary string used to identify one or more LAN devices, value of the DHCP Client Identifier. The DHCP Client Identifier is Option 61 (as defined in {{bibref|RFC2132}}) for {{enum|DHCPv4|DHCPType}}, or is Option 1 (as defined in {{bibref|RFC8415}}) for {{enum|DHCPv6|DHCPType}}. The option value is binary, so an exact match is REQUIRED. {{empty}} indicates this criterion is not used for classification. Note: DHCPv4 Option values are limited to a length of 255, while DHCPv6 Option values can have a maximum length of 65535. Note: This parameter is DHCP version neutral. The specific DHCP version in use with this parameter is indicated by {{param|DHCPType}}. Note: DHCPv6 Option 1 (Client Identifier) is sometimes referred to as ''DUID''. If {{false}}, the class includes only those packets destined for LAN devices that match the {{param|DestClientID}} entry, if specified. If {{true}}, the class includes all packets except those destined for LAN devices that match the {{param|DestClientID}} entry, if specified. Classification criterion. A hexbinary string used to identify one or more LAN devices, value of the DHCP User Class Identifier. The DHCP User Class Identifier is Option 77 (as defined in {{bibref|RFC3004}}) for {{enum|DHCPv4|DHCPType}}, or is Option 15 (as defined in {{bibref|RFC8415}}) for {{enum|DHCPv6|DHCPType}}. The option value is binary, so an exact match is REQUIRED. {{empty}} indicates this criterion is not used for classification. Note: DHCPv4 Option values are limited to a length of 255, while DHCPv6 Option values can have a maximum length of 65535. Note: This parameter is DHCP version neutral. The specific DHCP version in use with this parameter is indicated by {{param|DHCPType}}. If {{false}}, the class includes only those packets sourced from LAN devices that match the {{param|SourceUserClassID}} entry, if specified. If {{true}}, the class includes all packets except those sourced from LAN devices that match the {{param|SourceUserClassID}} entry, if specified. Classification criterion. A hexbinary string used to identify one or more LAN devices, value of the DHCP User Class Identifier. The DHCP User Class Identifier is Option 77 (as defined in {{bibref|RFC3004}}) for {{enum|DHCPv4|DHCPType}}, or is Option 15 (as defined in {{bibref|RFC8415}}) for {{enum|DHCPv6|DHCPType}}. The option value is binary, so an exact match is REQUIRED. {{empty}} indicates this criterion is not used for classification. Note: DHCPv4 Option values are limited to a length of 255, while DHCPv6 Option values can have a maximum length of 65535. Note: This parameter is DHCP version neutral. The specific DHCP version in use with this parameter is indicated by {{param|DHCPType}}. If {{false}}, the class includes only those packets destined for LAN devices that match the {{param|DestUserClassID}} entry, if specified. If {{true}}, the class includes all packets except those destined for LAN devices that match the {{param|DestUserClassID}} entry, if specified. Classification criterion. A hexbinary string used to identify one or more LAN devices, value of the DHCP Vendor-specific Information, matched according to the criteria in {{param|SourceVendorSpecificInfoEnterprise}} and {{param|SourceVendorSpecificInfoSubOption}}. The DHCP Vendor-specific Information is Option 125 (as defined in {{bibref|RFC3925}}) for {{enum|DHCPv4|DHCPType}}, or is Option 17 (as defined in {{bibref|RFC8415}}) for {{enum|DHCPv6|DHCPType}}. {{empty}} indicates this criterion is not used for classification. Note: DHCPv4 Option values are limited to a length of 255, while DHCPv6 Option values can have a maximum length of 65535. Note: This parameter is DHCP version neutral. The specific DHCP version in use with this parameter is indicated by {{param|DHCPType}}. If {{false}}, the class includes only those packets sourced from LAN devices that match the {{param|SourceVendorSpecificInfo}} entry, if specified. If {{true}}, the class includes all packets except those sourced from LAN devices that match the {{param|SourceVendorSpecificInfo}} entry, if specified. {{param|SourceVendorSpecificInfo}} Enterprise Number as defined in {{bibref|RFC3925}}. The default value (0) is assigned to IANA and will probably need to be replaced with an appropriate enterprise number. {{param|SourceVendorSpecificInfo}} Sub Option Code as defined in {{bibref|RFC3925}}. Classification criterion. A hexbinary string used to identify one or more LAN devices, value of the DHCP Vendor-specific Information, matched according to the criteria in {{param|DestVendorSpecificInfoEnterprise}} and {{param|DestVendorSpecificInfoSubOption}}. The DHCP Vendor-specific Information is Option 125 (as defined in {{bibref|RFC3925}}) for {{enum|DHCPv4|DHCPType}}, or is Option 17 (as defined in {{bibref|RFC8415}}) for {{enum|DHCPv6|DHCPType}}. {{empty}} indicates this criterion is not used for classification. Note: DHCPv4 Option values are limited to a length of 255, while DHCPv6 Option values can have a maximum length of 65535. Note: This parameter is DHCP version neutral. The specific DHCP version in use with this parameter is indicated by {{param|DHCPType}}. If {{false}}, the class includes only those packets destined for LAN devices that match the {{param|DestVendorSpecificInfo}} entry, if specified. If {{true}}, the class includes all packets except those destined for LAN devices that match the {{param|DestVendorSpecificInfo}} entry, if specified. {{param|DestVendorSpecificInfo}} Enterprise Number as defined in {{bibref|RFC3925}}. The default value (0) is assigned to IANA and will probably need to be replaced with an appropriate enterprise number. {{param|DestVendorSpecificInfo}} Sub Option Code as defined in {{bibref|RFC3925}}. Classification criterion. If {{false}}, this criterion is not used for classification. If {{true}}, this criterion matches with all TCP segments that have the ACK control bit set. If {{false}}, the class includes only those packets that match the {{param|TCPACK}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|TCPACK}} entry, if specified. Classification criterion. Minimum IP Packet Length (including header) in {{units}}. Classification criterion. Maximum IP Packet Length (including header) in {{units}}. A value of zero indicates that no maximum is specified (an umlimited maximum length). If {{false}}, the class includes only those packets whose length (including header) falls within the inclusive range {{param|IPLengthMin}} through {{param|IPLengthMax}}. A value of zero for both {{param|IPLengthMin}} and {{param|IPLengthMax}} allows any length packet. An equal non-zero value of {{param|IPLengthMin}} and {{param|IPLengthMax}} allows only a packet with the exact length specified. If {{true}}, the class includes all packets except those whose length (including header) falls within the inclusive range {{param|IPLengthMin}} through {{param|IPLengthMax}}. Classification criterion. DiffServ codepoint (defined in {{bibref|RFC2474}}). If set to a Class Selector Codepoint (defined in {{bibref|RFC2474}}), all DSCP values that match the first 3 bits will be considered a valid match. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|DSCPCheck}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|DSCPCheck}} entry, if specified. Classification result. DSCP to mark traffic with that falls into this classification entry. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of DSCP based upon the EthernetPriority value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Classification criterion. Current Ethernet priority of a VLAN Tag as defined in {{bibref|802.1Q-2011}} or Ethernet Priority field as defined in 802.1D. If more than 1 VLAN tag is present, then this parameter represents the outer VLAN Tag. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|EthernetPriorityCheck}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|EthernetPriorityCheck}} entry, if specified. Classification result. Ethernet priority code (as defined in {{bibref|802.1Q-2011}}) to mark traffic with that falls into this classification entry associated with the {{param|EthernetPriorityCheck}}. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Classification criterion. Current Ethernet priority of the inner VLAN Tag as defined in 802.1Q. This parameter is only applicable when the PDU has 2 VLAN Tags. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|InnerEthernetPriorityCheck}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|InnerEthernetPriorityCheck}} entry, if specified. Classification result. Ethernet priority code to mark traffic with that falls into this classification entry associated with the {{param|InnerEthernetPriorityCheck}}. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Classification criterion. Current Ethernet Drop eligible Indication (DEI) of the VLAN tag as defined in 802.1Q. If 2 VLAN Tags are present, then this parameter represents the outer VLAN tag. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|EthernetDEICheck}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|EthernetDEICheck}} entry, if specified. Classification criterion. Current Ethernet VLAN ID as defined in 802.1Q. A value of -1 indicates this criterion is not used for classification. If {{false}}, the class includes only those packets that match the {{param|VLANIDCheck}} entry, if specified. If {{true}}, the class includes all packets except those that match the {{param|VLANIDCheck}} entry, if specified. Classification criterion. Allows traffic to be distinguished based on out-of-band information such as physical port or application ID. Primarily intended for, but not restricted to, locally sourced traffic. If specified, this entry applies to traffic with matching out-of-band information. A value of -1 indicates this criterion is not used for classification. Classification result. Identifier of the forwarding policy associated with traffic that falls in this classification. Classification result. Identifier of the traffic class associated with traffic that falls in this classification. If specified, at least one {{object|#.Queue}} table entry MUST include this traffic class in its {{param|#.Queue.{i}.TrafficClasses}} parameter (which is a comma-separated list). A value of -1 indicates a null traffic class. {{param}} and {{param|App}} are mutually exclusive and one of the two MUST be specified. If {{param}} is {{null}}, {{param|App}} MUST be specified, and vice versa. Classification result. {{reference}} Indicates the ''Policer'' table entry for traffic that falls in this classification. {{empty}} indicates a null policer. {{param}} MAY optionally be specified in conjunction with {{param|TrafficClass}}. {{param}} and {{param|App}} are mutually exclusive. Classification result. {{reference}} Indicates the ''App'' table entry for traffic that falls in this classification. {{empty}} indicates a null ''App''. {{param|TrafficClass}} and {{param}} are mutually exclusive and one of the two MUST be specified. If {{param|TrafficClass}} is null, {{param}} MUST be specified, and vice versa. Application table. Enables or disables this App table entry. The status of this App table entry. {{enum}} The {{enum|Error}} value MAY be used by the CPE to indicate a locally defined error condition. URN identifying the protocol associated with the given application. A set of defined URNs is given in {{bibref|TR-181i2|Annex A}}. Human-readable name associated with this entry in the App table. Identifier of the forwarding policy associated with traffic associated with this App table entry, but not associated with any specified flow. Identifier of the traffic class associated with traffic associated with this App table entry, but not associated with any specified flow. {{reference}} Indicates the ''Policer'' table entry for traffic associated with this {{object}} table entry, but not associated with any specified flow. {{empty}} indicates a null policer. DSCP to mark traffic associated with this App table entry, but not associated with any specified flow. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of DSCP based upon the EthernetPriority value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Ethernet priority code (as defined in {{bibref|802.1Q-2011}}) to mark traffic associated with this App table entry, but not associated with any specified flow. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Ethernet priority code (as defined in {{bibref|802.1Q-2011}}) to mark the inner VLAN Tags as defined in 802.1Q with this {{object}} table entry where the packet is not associated with any specified flow. This parameter is only applicable when the PDU has 2 VLAN Tags. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Flow table. Enables or disables this Flow table entry. The status of this Flow table entry. {{enum}} The {{enum|Error}} value MAY be used by the CPE to indicate a locally defined error condition. URN identifying the type of flow to be associated with the specified policer. A set of defined URNs is given in {{bibref|TR-181i2|Annex A}}. Each entry is a name-value pair representing additional criteria to identify the flow type. The use and interpretation is specific to the particular FlowType URN.Encoded using the "x-www-form-urlencoded" content type defined in {{bibref|HTML4.01}}. Human-readable name associated with this entry in the Flow table. {{reference}} Indicates the ''App'' table entry associated with this flow. {{empty}} indicates the flow table is not associated with any App table entry. Identifier of the forwarding policy associated with this flow. Identifier of the traffic class associated with this flow. {{reference}} Indicates the ''Policer'' table entry for traffic that falls in this flow. {{empty}} indicates a null policer. DSCP to mark traffic with that falls into this flow. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of DSCP based upon the EthernetPriority value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Ethernet priority code (as defined in {{bibref|802.1Q-2011}}) to mark traffic with that falls into this flow. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Ethernet priority code (as defined in {{bibref|802.1Q-2011}}) to mark the inner VLAN Tags with for traffic that falls into this flow. A value of -1 indicates no change from the incoming packet. A value of -2 indicates automatic marking of EthernetPriority based upon the DSCP value of the incoming packet as defined in {{bibref|TR-181i2|Annex A}}. Policer table. Enables or disables this policer. The status of this policer. {{enum}} The {{enum|Error}} value MAY be used by the CPE to indicate a locally defined error condition. Committed rate allowed for this policer in {{units}}. Note: To be able to support higher bit rates, this parameter was changed to unsignedLong in the Device:2.18 version. Committed Burstsize in {{units}}. Excess Burstsize in {{units}}. Applied for a {{enum|SingleRateThreeColor|MeterType}} meter. Peak rate allowed for this Meter in {{units}}. Applied for {{enum|TwoRateThreeColor|MeterType}} meters. Note: To be able to support higher bit rates, this parameter was changed to unsignedLong in the Device:2.18 version. Peak Burstsize in {{units}}. Applied for {{enum|TwoRateThreeColor|MeterType}} meters. Identifies the method of traffic measurement to be used for this policer. {{enum|SimpleTokenBucket}} makes use of {{param|CommittedRate}} and {{param|CommittedBurstSize}}. {{enum|SingleRateThreeColor}} makes use of {{param|CommittedRate}}, {{param|CommittedBurstSize}}, and {{param|ExcessBurstSize}} as defined in {{bibref|RFC2697}}. {{enum|TwoRateThreeColor}} makes use of {{param|CommittedRate}}, {{param|CommittedBurstSize}}, {{param|PeakRate}}, and {{param|PeakBurstSize}} as defined in {{bibref|RFC2698}}. {{list}} Indicates supported meter types. Instructions for how to handle traffic that is conforming. {{pattern}} {{pattern|Null}} corresponds with no action. ''<DSCP Value>'' is an unsigned integer that corresponds with a mark action overwriting the traffic's DSCP with the configured DSCP. ''<:Ethernet Priority>'' is a colon (":") followed by an unsigned integer (no white space). It corresponds with a mark action overwriting the traffic's Ethernet Priority with the configured Ethernet Priority. ''<DSCP Value:Ethernet Priority>'' is an unsigned integer followed by a colon (":") and a second unsigned integer (no white space). It corresponds with a mark action overwriting the traffic's DSCP and Ethernet Priority with the configured values. For example, "24" specifies a DSCP value of 24, ":3" specifies an Ethernet Priority of 3, and "24:3" specifies both. <DSCP Value> <Ethernet Priority> <DSCP Value:Ethernet Priority> Instructions for how to handle traffic that is partially conforming (colored yellow). {{pattern}} {{pattern|Null}} corresponds with no action. ''<DSCP Value>'' is an unsigned integer that corresponds with a mark action overwriting the traffic's DSCP with the configured DSCP.Only applies for three-color meters. ''<:Ethernet Priority>'' is a colon (":") followed by an unsigned integer (no white space). It corresponds with a mark action overwriting the traffic's Ethernet Priority with the configured Ethernet Priority. ''<DSCP Value:Ethernet Priority>'' is an unsigned integer followed by a colon (":") and a second unsigned integer (no white space). It corresponds with a mark action overwriting the traffic's DSCP and Ethernet Priority with the configured values. For example, "24" specifies a DSCP value of 24, ":3" specifies an Ethernet Priority of 3, and "24:3" specifies both. <DSCP Value> <Ethernet Priority> <DSCP Value:Ethernet Priority> Instructions for how to handle traffic that is non-conforming. {{pattern}} {{pattern|Null}} corresponds with no action. ''<DSCP Value>'' is an unsigned integer that corresponds with a mark action overwriting the traffic's DSCP with the configured DSCP. ''<:Ethernet Priority>'' is a colon (":") followed by an unsigned integer (no white space). It corresponds with a mark action overwriting the traffic's Ethernet Priority with the configured Ethernet Priority. ''<DSCP Value:Ethernet Priority>'' is an unsigned integer followed by a colon (":") and a second unsigned integer (no white space). It corresponds with a mark action overwriting the traffic's DSCP and Ethernet Priority with the configured values. For example, "24" specifies a DSCP value of 24, ":3" specifies an Ethernet Priority of 3, and "24:3" specifies both. <DSCP Value> <Ethernet Priority> <DSCP Value:Ethernet Priority> Total number of Packets counted by this policer, regardless of meter action. Total number of Bytes counted by this policer, regardless of meter action. Number of conforming Packets counted by this policer, regardless of meter action. Number of conforming Bytes counted by this policer, regardless of meter action. Number of partially conforming Packets counted by this policer, regardless of meter action. Number of partially conforming Bytes counted by this policer, regardless of meter action. Number of non-conforming Packets counted by this policer, regardless of meter action. Number of non-conforming Bytes counted by this policer, regardless of meter action. Queue table. Each entry is associated with a set of traffic classes, which are specified via the {{param|TrafficClasses}} parameter, and is configured with weight, precedence, drop algorithm, scheduler algorithm etc as appropriate for the traffic classes. An entry can be associated either with all egress interfaces (in which case an actual queue will be instantiated on each egress interface on which traffic of that traffic class can be generated) or else with a single specified egress interface. For enabled table entries, if {{param|Interface}} is not a valid reference and {{param|AllInterfaces}} is {{false}}, then the table entry is inoperable and the CPE MUST set {{param|Status}} to {{enum|Error_Misconfigured|Status}}. Enables or disables this queue. The status of this queue. {{enum}} The {{enum|Error_Misconfigured}} value indicates that a necessary configuration value is undefined or invalid. The {{enum|Error}} value MAY be used by the CPE to indicate a locally defined error condition. {{list}} Each reference can be associated with another {{object|##.QoS.Queue.{i}}}, {{object|##.QoS.Shaper.{i}}}, {{object|##.QoS.Scheduler.{i}}} instance object. The references in this parameter are used to build a hierarchy. {{list}} Each list item identifies the set of traffic classes associated with this queue. Traffic is sent to this queue if a {{object|#.Classification}}, {{object|#.App}} or {{object|#.Flow}} table entry specifies a traffic class, e.g. via the {{param|#.Classification.{i}.TrafficClass}} parameter. If more than one queue on a given egress interface is associated with a given traffic class, the implementation will choose which queue to send traffic of this class to. {{reference}} Specifies the egress interface for which the specified queue MUST exist. This MAY be a layer 1, 2 or 3 interface, however, the types of interfaces for which ''Queues'' can be instantiated is a local matter to the CPE. Indicates that the specified queue MUST exist for all egress interfaces (i.e. this queue entry is to apply to all egress interfaces). If {{true}}, the value of {{param|Interface}} is ignored since all egress interfaces are indicated. Indicates whether ''all'' the queues corresponding to this table entry are hardware assisted. If any of the queues corresponding to this table entry are not hardware assisted, the parameter value MUST be {{false}}. Number of {{units}} in the buffer. Queue buffer size for all egress interfaces for which this queue exists. If the buffer size is not the same for all such egress interfaces, this parameter MUST be 0. Weight of this queue in case of {{enum|WFQ|SchedulerAlgorithm}} or {{enum|WRR|SchedulerAlgorithm}}, but only used for queues of equal precedence. Precedence of this queue relative to others. Lower numbers imply greater precedence. Random Early Detection threshold, used only when {{param|DropAlgorithm}} is {{enum|RED|DropAlgorithm}}. This is the minimum threshold (''min_th'') and is measured as a percentage of the queue size. If the value is set to zero, the CPE MUST choose a sensible value, e.g. 5 (but the value MUST still read back as zero). In this version of the data model, there is no way to set the maximum threshold (''max_th''). The CPE MUST choose a sensible value, e.g. three times the minimum threshold. In this version of the data model, there is no way to set the RED weight (''w_q''). The CPE MUST choose a sensible value, e.g. 0.002. Random Early Detection percentage, used only when {{param|DropAlgorithm}} is {{enum|RED|DropAlgorithm}}. This is the maximum value of the packet marking probability (''max_p''). If the value is set to zero, the CPE MUST choose a sensible value, e.g. 10 (but the value MUST still read back as zero). In this version of the data model, there is no way to set the RED weight (''w_q''). The CPE MUST choose a sensible value, e.g. 0.002. Dropping algorithm used for this queue if congested. Random Early Detection {{bibref|RED}} Drop Tail Weighted RED {{bibref|BLUE}} Scheduling Algorithm used by scheduler. Weighted Fair Queueing Weighted Round Robin Strict Priority Rate to shape this queue's traffic to. For leaky bucket (constant rate shaping), this is the constant rate. For token bucket (variable rate shaping), this is the average rate. If <= 100, in percent of the rate of the highest rate-constrained layer over which the packet will travel on egress. If > 100, in bits per second. A value of -1 indicates no shaping. For example, for packets destined for a WAN DSL interface, if the egress will be on a PPP or IP link with a specified ''ShapingRate'', the percentage is calculated relative to this rate. Otherwise, if the ATM layer is rate-constrained, then the rate is calculated relative to this rate. Otherwise, the rate is calculated relative to the physical-layer DSL rate. Note: To be able to support higher bit rates, this parameter was changed to unsignedLong in the Device:2.18 version. If the Queue is active, the CurrentShapingRate must reflect the actual configured ShapingRate, in {{units}} per second. -1 means no rate due to do Queue not active. Note: To be able to support higher bit rates, this parameter was changed to unsignedLong in the Device:2.18 version. Minimum rate to shape this queue's traffic to. If <= 100, in percent of the rate of the highest rate-constrained layer over which the packet will travel on egress. If > 100, in bits per second. A value of -1 indicates no shaping. Note: To be able to support higher bit rates, this parameter was changed to unsignedLong in the Device:2.18 version. If the Queue is active, the CurrentAssuredRate must reflect the actual configured AssuredRate, in bits per second. -1 means no rate due to do Queue not active. Note: To be able to support higher bit rates, this parameter was changed to unsignedLong in the Device:2.18 version. Burst size in {{units}}. For both leaky bucket (constant rate shaping) and token bucket (variable rate shaping) this is the bucket size and is therefore the maximum burst size. Queue statistics table. This table is managed by the Controller, which will create entries only for those {Queue, Interface} combinations for which statistics are to be collected. Note: The {{object}} table includes unique key parameters that are strong references. If a strongly referenced object is deleted, the CPE will set the referencing parameter to {{empty}}. However, doing so under these circumstances might cause the updated {{object}} row to then violate the table's unique key constraint; if this occurs, the CPE MUST disable the offending {{object}} row. Enables or disables this object. The status of this object. Enabled and {Queue,Interface} is valid Enabled but {Queue,Interface} is invalid {{reference}} Indicates ''Queue'' entry with which this object is associated. {{reference}} Specifies the egress interface for which this object contains statistics. This MAY be a layer 1, 2 or 3 interface, however, the types of interfaces for which ''QueueStats'' can be instantiated is a local matter to the CPE. Number of packets output through the queue. Number of {{units}} output through the queue. Number of packets dropped by the queue. Number of {{units}} dropped by the queue. Queue occupancy in packets (gives a measure of queue latency). Queue occupancy measured as a {{units}}, i.e. 100 * queue occupancy in bytes / queue size in bytes (gives a measure of queue usage). Shaper table. Used to shape the queue(s) associated with {{param|Interface}}. In case of a single queue for that interface, determines the egress rate of the queue. In case of multiple queues for that interface (possibly with per queue shaping rates), determines the aggregate egress rate on that interface. For enabled table entries, if {{param|Interface}} is not a valid reference then the table entry is inoperable and the CPE MUST set {{param|Status}} to {{enum|Error_Misconfigured|Status}}. Note: The {{object}} table includes a unique key parameter that is a strong reference. If a strongly referenced object is deleted, the CPE will set the referencing parameter to {{empty}}. However, doing so under these circumstances might cause the updated {{object}} row to then violate the table's unique key constraint; if this occurs, the CPE MUST set {{param|Status}} to {{enum|Error_Misconfigured|Status}} and disable the offending {{object}} row. Enables or disables this shaper. The status of this shaper. {{enum}} The {{enum|Error_Misconfigured}} value indicates that a necessary configuration value is undefined or invalid. The {{enum|Error}} value MAY be used by the CPE to indicate a locally defined error condition. {{list}} Each reference can be associated with another {{object|##.QoS.Queue.{i}}}, {{object|##.QoS.Shaper.{i}}}, {{object|##.QoS.Scheduler.{i}}} instance object. The references in this parameter are used to build a hierarchy. {{reference}}The interface object associated with this ''Shaper'' entry. It MAY be a layer 1, 2 or 3 interface, however, the types of interfaces for which ''Shapers'' can be instantiated is a local matter to the CPE. Rate to shape the associated interface connection's egress traffic to. For leaky bucket (constant rate shaping), this is the constant rate. For token bucket (variable rate shaping), this is the average rate. If <= 100, in percent of the rate of the highest rate-constrained layer over which the packet will travel on egress. If > 100, in bits per second. A value of -1 indicates no shaping. For example, for packets destined for a WAN DSL interface, if the ATM layer is rate-constrained, then the rate is calculated relative to this rate. Otherwise, the rate is calculated relative to the physical-layer DSL rate. Note: To be able to support higher bit rates, this parameter was changed to unsignedLong in the Device:2.18 version. Burst size in {{units}}. For both leaky bucket (constant rate shaping) and token bucket (variable rate shaping) this is the bucket size and is therefore the maximum burst size. Scheduler table. Each entry is used to model a scheduler object. Enables or disables this scheduler. The status of this scheduler. {{enum}} The {{enum|Error_Misconfigured}} value indicates that a necessary configuration value is undefined or invalid. The {{enum|Error}} value MAY be used by the CPE to indicate a locally defined error condition. {{list}} Each reference can be associated with another {{object|##.QoS.Queue.{i}}}, {{object|##.QoS.Shaper.{i}}}, {{object|##.QoS.Scheduler.{i}}} instance object. The references in this parameter are used to build a hierarchy. {{reference}} Specifies the egress interface for which the specified queue MUST exist. This MAY be a layer 1, 2 or 3 interface, however, the types of interfaces for which ''Queues'' can be instantiated is a local matter to the CPE. Scheduling Algorithm used by scheduler. Weighted Fair Queueing Weighted Round Robin Strict Priority Rate to shape this scheduler's traffic to. For leaky bucket (constant rate shaping), this is the constant rate. For token bucket (variable rate shaping), this is the average rate. If <= 100, in percent of the rate of the highest rate-constrained layer over which the packet will travel on egress. If > 100, in bits per second. A value of -1 indicates no shaping. Note: To be able to support higher bit rates, this parameter was changed to unsignedLong in the Device:2.18 version. Minimum guaranteed rate to shape this scheduler's traffic to. Must be > 0 and < ShapingRate, for a valid rate. A value of -1 indicates the ShapingRate's value is not used. Note: To be able to support higher bit rates, this parameter was changed to unsignedLong in the Device:2.18 version. The value MUST be the Path Name for a {{object|##.QoS.Queue.{i}}} instance. If the referenced object is deleted, the parameter value MUST be set to an empty string. REQUIRED only for IPv4 capable devices. REQUIRED only for IPv6 capable devices.