![]() | FAPService:2.1 Femto Access Point Service Data Model [USP] (changes)tr-196-2-1-2-usp.xml | ||
DATA MODEL DEFINITION |
License
Copyright (c) 2010-2019, Broadband Forum
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
-
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
-
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
-
Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
The above license is used as a license under copyright only. Please reference the Forum IPR Policy for patent licensing terms https://www.broadband-forum.org/ipr-policy.
Any moral rights which are necessary to exercise under the above license grant are also deemed granted under this license.
Data Types
The Parameters defined in this specification make use of a limited subset of the default SOAP data types [SOAP1.1]. These data types and the named data types used by this specification are described below.
Note: A Parameter that is defined to be one of the named data types is reported as such at the beginning of the Parameter's description via a reference back to the associated data type definition (e.g. [MACAddress]). However, such parameters still indicate their SOAP data types.
Data Type | Base Type | Description |
---|---|---|
boolean |
- |
Boolean, where the allowed values are 0 or 1 (or equivalently, true or false). |
dateTime |
- |
The subset of the ISO 8601 date-time format defined by the SOAP dateTime type [SOAP1.1]. |
int |
- |
Integer in the range -2147483648 to +2147483647, inclusive. For some int types, a value range is given using the form int(Min:Max) or int(Min:Max step Step) where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges. |
string |
- |
For strings, a minimum and maximum allowed length can be indicated using the form string(Min:Max), where Min and Max are the minimum and maximum string length in characters. If either Min or Max are missing, this indicates no limit, and if Min is missing the colon can also be omitted, as in string(Max). Multiple comma-separated ranges can be specified, in which case the string length will be in one of the ranges. |
unsignedInt |
- |
Unsigned integer in the range 0 to 4294967295, inclusive. For some unsignedInt types, a value range is given using the form unsignedInt(Min:Max) or unsigned(Min:Max step Step), where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges. |
unsignedLong |
- |
Unsigned long integer in the range 0 to 18446744073709551615, inclusive. For some unsignedLong types, a value range is given using the form unsignedLong(Min:Max) or unsignedLong(Min:Max step Step), where the Min and Max values are inclusive. If either Min or Max are missing, this indicates no limit. If Step is missing, this indicates a step of 1. Multiple comma-separated ranges can be specified, in which case the value will be in one of the ranges. |
Alias |
string(:64) |
A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
|
References
3GPP TS 22.011, Service accessibility, 3GPP SA WG1. |
|
3GPP TS 23.003, Numbering, addressing and identification, 3GPP CT WG4. |
|
3GPP TS 24.008, Mobile radio interface Layer 3 specification; Core network protocols; Stage 3, 3GPP CT WG1. |
|
3GPP TS 25.104, Base Station (BS) radio transmission and reception (FDD), 3GPP RAN WG4. |
|
3GPP TS 25.304, User Equipment (UE) procedures in idle mode and procedures for cell reselection in connected mode, 3GPP RAN WG2. |
|
3GPP TS 25.331, Radio Resource Control (RRC); Protocol specification, 3GPP RAN WG2. |
|
3GPP TS 25.401, UTRAN overall description, 3GPP RAN WG3. |
|
3GPP TS 25.413, UTRAN Iu interface Radio Access Network Application Part (RANAP) signalling, 3GPP RAN WG3. |
|
3GPP TS 32.452, Performance measurements Home Node B(HNB) Subsystem (HNS), 3GPP SA WG5. |
|
3GPP TS 32.453, Performance measurements Home Enhanced Node B(HeNB) Subsystem (HeNS), 3GPP SA WG5. |
|
3GPP TS 32.592, Telecommunications management; Home enhanced Node B (HeNB) Operations, Administration, Maintenance and Provisioning (OAM&P); Information model for Type 1 interface HeNB to HeNB Management System (HeMS), 3GPP SA WG5. |
|
3GPP TS 32.642, Telecommunication management; Configuration Management (CM); UTRAN network resources Integration Reference Point (IRP); Network Resource Model (NRM), 3GPP SA WG5. |
|
3GPP TS 36.214, Evolved Universal Terrestrial Radio Access (E-UTRA); Physical layer - Measurements, 3GPP RAN WG1. |
|
3GPP TS 36.304, Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) procedures in idle mode, 3GPP RAN WG2. |
|
3GPP TS 36.314, Evolved Universal Terrestrial Radio Access (E-UTRA); Layer 2 - Measurements, 3GPP RAN2 WG2. |
|
3GPP TS 36.331, Evolved Universal Terrestrial Radio Access (E-UTRA); Radio Resource Control (RRC); Protocol specification, 3GPP RAN WG2. |
|
3GPP TS 45.008, Radio Access Network; Radio subsystem link control, 3GPP GERAN WG1. |
|
A.S0008-C v2.0, Interoperability Specification (IOS) for High Rate Packet Data (HRPD) Radio Access Network Interfaces with Session Control in the Access Network, 3GPP2, January 2009. |
|
A.S0009-C v2.0, Interoperability Specification (IOS) for High Rate Packet Data (HRPD) Radio Access Network Interfaces with Session Control in the Packet Control Function, 3GPP2, January 2009. |
|
A.S0013-D v2.0, Interoperability Specification (IOS) for CDMA2000 Access Network Interfaces Part 3 Features, 3GPP2, August 2009. |
|
C.S0005-E v1.0, Upper Layer (Layer 3) Signaling Standard for CDMA2000 Spread Spectrum Systems, 3GPP2, September 2009. |
|
C.S0057-D v1.0, Band Class Specification for CDMA2000 Spread Spectrum Systems, 3GPP2, September 2009. |
|
IANA Uniform Resource Identifier (URI) Schemes Registry, Uniform Resource Identifier (URI) Schemes, IANA. |
|
Guidelines for 64-bit Global Identifier (EUI-64) Registration Authority, Guidelines for 64-bit Global Identifier (EUI-64) Registration Authority, IEEE, March 1997. |
|
[RFC3986] |
RFC 3986, Uniform Resource Identifier (URI): Generic Syntax, IETF. |
[RFC4007] |
RFC 4007, IPv6 Scoped Address Architecture, IETF. |
[RFC4122] |
RFC 4122, A Universally Unique IDentifier (UUID) URN Namespace, IETF, 2005. |
[RFC4291] |
RFC 4291, IP Version 6 Addressing Architecture, IETF, 2006. |
[RFC4632] |
RFC 4632, Classless Inter-domain Routing (CIDR): The Internet Address Assignment and Aggregation Plan, IETF, 2006. |
[RFC7159] |
RFC7159, The JavaScript Object Notation (JSON) Data Interchange Format, IETF, March 2014. |
[RFC7230] |
RFC 7230, Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing, IETF, June 2014. |
[RFC7252] |
RFC 7252, The Constrained Application Protocol (CoAP), IETF, June 2014. |
[RFC8141] |
RFC 8141, Uniform Resource Names (URNs), IETF, April 2017. |
[SOAP1.1] |
Simple Object Access Protocol (SOAP) 1.1, W3C. |
[TR-069] |
TR-069 Amendment 6, CPE WAN Management Protocol, Broadband Forum, April 2018. |
[TR-106a2] |
TR-106 Amendment 2, Data Model Template for TR-069-Enabled Devices, Broadband Forum, November 2008. |
[TR-181i2] |
TR-181 Issue 2 Amendment 15, Device Data Model, Broadband Forum, January 2022. |
ZigBee 2007 Specification, ZigBee 2007 Specification, ZigBee Alliance, October 2007. |
Legend
Object definition. |
Mount point definition. |
Parameter definition. |
Command or Event definition. |
Command Input / Output Arguments container. |
Command or Event Object Input / Output Argument definition. |
Command or Event Parameter Input / Output Argument definition. |
FAPService:2.1 Data Model
For a given implementation of this data model, the Agent MUST indicate support for the highest version number of any object or parameter that it supports. For example, even if the Agent supports only a single parameter that was introduced in version 1.4, then it will indicate support for version 1.4. The version number associated with each object and parameter is shown in the Version column.
Changes since 2.0:
- Changed name = FAPService:2.0 ⇒ FAPService:2.1
Name | Type | Write | Description | Object Default | Version |
---|---|---|---|---|---|
FAPService.{i}. |
object(0:) |
R |
The Femto Access Point (FAP) Service Object. At most one entry in this table can exist with a given value for Alias. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.Capabilities. |
object |
R |
This object contains parameters relating to the hardware capabilities of the FAP device. |
- |
2.0 |
FAPService.{i}.Capabilities.CDMA2000. |
object |
R |
This object contains parameters relating to the capability attributes for CDMA2000 FAP. |
- |
2.0 |
FAPService.{i}.Capabilities.CDMA2000.OneX. |
object |
R |
This object contains parameters relating to the capability attributes for the CDMA2000 1x radio technology portions of a CDMA2000 FAP. |
- |
2.0 |
BandClassSupportedFAP |
string(:32)[] |
R |
Comma-separated list of strings (maximum number of characters per item 32). Indicates the CDMA bands that the FAP supports. At least one band MUST be supported and multiple bands MAY be supported. Bandclass is a 1 or 2-digit number as defined in [3GPP2-C.S0057]. The following are example values: "0" (specifies US Cellular) "1,3,14" (specifies US PCS, Japan Cellular and US PCS 1.9Ghz) Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.FAPControl. |
object |
R |
This object contains parameters relating to state management and provisioning aspects of the FAP. |
- |
2.0 |
FAPService.{i}.FAPControl.CDMA2000. |
object |
R |
This object contains parameters relating to the configuration for the control portions of a CDMA2000 FAP. |
- |
2.0 |
FAPService.{i}.FAPControl.CDMA2000.HRPD. |
object |
R |
Operational parameters for the HRPD portion of a CDMA2000 FAP. |
- |
2.0 |
FAPService.{i}.FAPControl.CDMA2000.HRPD.A13. |
object |
R |
This object contains attributes related to A13 Session Transfer |
- |
2.0 |
FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.ColorCodeToUATI104.{i}. |
object(1:) |
W |
HRPD ColorCode to UATI Mapping Table number of entries. This table MUST contain at least 1 entry. At most one entry in this table can exist with the same values for both ColorCode and UATI104, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.FAPControl.CDMA2000.HRPD.A13.HRPDSubnetToIP.{i}. |
object(1:) |
W |
This object contains attributes related to A13 Session Transfer This table MUST contain at least 1 entry. At most one entry in this table can exist with a given value for A13IPAddress, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.AccessMgmt. |
object |
R |
This object contains parameters relating to Access Management for the different radio technologies. |
- |
2.0 |
FAPService.{i}.AccessMgmt.UMTS. |
object |
R |
This object contains parameters relating to Access Management for UMTS FAP (ACL, CSG, LIPA). Closed Subscriber Group (CSG) service behavior is specified in [3GPP-TS.22.011]. Note: Cell barring and 3GPP access class parameters are contained in CellConfig.UMTS.RAN.CellRestriction. (UMTS FAP). |
- |
2.0 |
FAPService.{i}.AccessMgmt.UMTS.MemberDetail.{i}. |
object(0:) |
W |
Details for CSG and Non-CSG members. At most one entry in this table can exist with a given value for IMSI, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.AccessMgmt.CDMA2000. |
object |
R |
This object contains configurable and observable attributes related to CDMA2000 Access and Admission Control of the FAP. |
- |
2.0 |
AccessControlList |
string(:15)[](:1024) |
W |
Comma-separated list (maximum number of characters 1024) of strings (maximum number of characters per item 15). (maximum item length 15). Each entry is an IMSI. |
- |
2.0 |
FAPService.{i}.AccessMgmt.CDMA2000.MemberDetail.{i}. |
object(1:) |
W |
At most one enabled entry in this table can exist with a given value for IMSI and HRPDIdentifierValue. The IMSI field may be empty. This table MUST contain at least 1 entry. At most one entry in this table can exist with a given value for IMSI, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
MembershipExpires |
dateTime |
W |
The time that the current ACL membership expires. An Unknown Time value, as defined in [Section 3.2/TR-106a2], indicates that the membership doesn't expire. Changes since 2.0:
|
0001-01-01T00:00:00Z |
2.0 |
FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess. |
object |
R |
Local IP access support as defined in 3GPP2 |
- |
2.0 |
FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD. |
object |
R |
Local IP access support as defined in 3GPP2 |
- |
2.0 |
FAPService.{i}.AccessMgmt.CDMA2000.LocalIPAccess.HRPD.EgressFilter.{i}. |
object(1:) |
W |
HRPD LIPA Egress Filter Table entries. This table MUST contain at least 1 entry. At most one entry in this table can exist with the same values for both Subnet and SubnetMask, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.AccessMgmt.Legacy. |
object |
R |
This object contains configurable and observable attributes related to Access and Admission Control of the FAP, which are not not covered by 3GPP and 3GPP2 specifications. |
- |
2.0 |
FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess. |
object |
R |
Old Local IP access object, included on special request. |
- |
2.0 |
FAPService.{i}.AccessMgmt.Legacy.LocalIPAccess.Rule.{i}. |
object(0:) |
W |
Policy for selecting traffic for local IP access. Originated traffic will be NAT'ed. The rule is bi-directional, i.e. return traffic is allowed. Rules do NOT affect traffic to/from the FAP itself (such as TR-069 or control). The rules are applied to the mobile station data traffic (PS-domain) via deep packet inspection or similar method. At most one entry in this table can exist with the same values for all of DestIPAddress, DestSubnetMask and Protocol, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
Interface |
string(:256) |
W |
Specifies the egress interface when Action is set to NAPT. The value MUST be the Path Name of a table row. layer-3 connection object. Example: InternetGatewayDevice.LANDevice.{i}.LANEthernetInterfaceConfig.{i}. |
- |
2.0 |
FAPService.{i}.CellConfig. |
object |
R |
This object contains parameters relating to configuring the FAP. |
- |
2.0 |
FAPService.{i}.CellConfig.UMTS. |
object |
R |
This object contains parameters relating to configuring UMTS system specific information. |
- |
2.0 |
TunnelInstance |
string(:256) |
W |
This is the reference to the IPsec tunnel instance used by the UMTS FAP. For all root data models, which use the tunnel definition provided in {{bibref|TR-262}} (InternetGatewayDevice:1 {{bibref|TR-098}} and Device:1 {{bibref|TR-181i1}}) theThe TunnelInstance MUST point to a row in the 'FAP.Tunnel.IKESA.{i}.' table, defined in {{bibref|TR-262}}. If the root data model used is Device:2 {{bibref|TR-181i2}} than the {{param}} MUST point toan IPsec tunnel instance defined in [TR-181i2]. If the referenced object is deleted, the parameter value MUST be set to an empty string. In case of a multiple-radio-technology FAP product, each radio technology can have its own tunnels or share common tunnels. In the former case, TunnelInstance can contain a unique instance number. In the latter case, TunnelInstance under all radio technologies can have the same instance number. |
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.CN. |
object |
R |
This object contains parameters relating to configuring UMTS CN. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.CN.CSDomain. |
object |
R |
This object contains parameters relating to configuring the CS domain of the UMTS CN. |
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.CN.CSDomain.RAB. |
object |
R |
This object provides monitoring of the Circuit Switch RAB in the HNB. |
- |
2.1 |
FAPService.{i}.CellConfig.UMTS.CN.CSDomain.RAB.Stats. |
object |
R |
This object provides the RAB statistics in the CS Domain as defined in [3GPP-TS.32.452]. |
- |
2.1 |
AttEstabCS |
unsignedInt |
R |
This measurement provides the total number of requested RABs in establishment attempts. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FailEstabCS |
unsignedInt |
R |
This measurement provides the number of RABs establishment failures for the CS domain. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
SuccEstabCS |
unsignedInt |
R |
This measurement provides the number of successfully established RABs for the CS domain. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
RelDropCS |
unsignedInt |
R |
This measurement provides the total number of dropped RAB connections for service type CS Domain. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.UMTS.CN.CSDomain.HHO. |
object |
R |
This object provides monitoring of the circuit switch Hard Handover (HHO) in the HNB. |
- |
2.1 |
FAPService.{i}.CellConfig.UMTS.CN.CSDomain.HHO.Stats. |
object |
R |
This object provides the circuit switch HHO statistics as defined in [3GPP-TS.32.452]. |
- |
2.1 |
Att3GMacroToHnbCSHO |
unsignedInt |
R |
This measurement provides the number of attempted 3G Macro to HNB CS handovers. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
Succ3GMacroToHnbCSHO |
unsignedInt |
R |
This measurement provides the number of successful 3G Macro to HNB CS handovers. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
Att2GMacroToHnbCSHO |
unsignedInt |
R |
This measurement provides the number of attempted 2G Macro to HNB CS handovers. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
Succ2GMacroToHnbCSHO |
unsignedInt |
R |
This measurement provides the number of successful 2G Macro to HNB CS handovers. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.UMTS.CN.PSDomain. |
object |
R |
This object contains parameters relating to configuring the PS domain of the UMTS CN. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.CN.PSDomain.RAB. |
object |
R |
This object provides monitoring of the Packet Switch RAB in the HNB. |
- |
2.1 |
FAPService.{i}.CellConfig.UMTS.CN.PSDomain.RAB.Stats. |
object |
R |
This object provides the RAB statistics in the PS Domain as defined in [3GPP-TS.32.452]. |
- |
2.1 |
AttEstabPS |
string[] |
R |
This measurement provides the number of requested RAB in establishment attempts for the PS domain by traffic class. Comma-separated list of strings, where each item is defined as the "traffic class name=measurement value". The total of all the measurements is provided using the traffic class name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
SuccEstabPS |
unsignedInt |
R |
This measurement provides the total number of successfully established RABs for the PS domain Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FailEstabPS |
unsignedInt |
R |
This measurement provides the total number of RABs establishment failures for the PS domain. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
RelDropPS |
unsignedInt |
R |
This measurement provides the total number of abnormally released PS RAB connections. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ULNumUserBitsEDCH |
unsignedLong |
R |
This measurement provides the number of uplink User Bits for PS RABs related with EDCH above RLC. The average uplink data throughput on EDCH RABs can be derived from this measurement. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ULNumUserBits64K |
unsignedInt |
R |
This measurement provides the number of Uplink User Bits for PS RABs with UL 64 kbps data rate. The average uplink data throughput on 64 kbps RABs can be derived from this measurement. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ULNumUserBits128K |
unsignedInt |
R |
This measurement provides the number of Uplink User Bits for PS RABs with UL 128 kbps data rate. The average uplink data throughput on 128 kbps RABs can be derived from this measurement. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ULNumUserBits384K |
unsignedInt |
R |
This measurement provides the number of Uplink User Bits for PS RABs with UL 384 kbps data rate. The average uplink data throughput on 384 kbps RABs can be derived from this measurement. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
DLNumUserBitsHSDPA |
unsignedInt |
R |
This measurement provides the number of Downlink User Bits for PS RABs related with HSDPA above RLC. The average downlink data throughput on HSDPA RABs can be derived from this measurement. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
DLNumUserBits64K |
unsignedInt |
R |
This measurement provides the number of Downlink User Bits for PS RABs (non-HSDPA) with DL 64 kbps data rate above RLC. The average downlink data throughput on 64 kbps RABs (non-HSDPA) can be derived from this measurement. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
DLNumUserBits128K |
unsignedInt |
R |
This measurement provides the number of Downlink User Bits for PS RABs (non-HSDPA) with DL 128 kbps data rate above RLC. The average downlink data throughput on 128 kbps RABs (non-HSDPA) can be derived from this measurement. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
DLNumUserBits384K |
unsignedInt |
R |
This measurement provides the number of Downlink User Bits for PS RABs (non-HSDPA) with DL 384 kbps data rate above RLC. The average downlink data throughput on 384 kbps RABs (non-HSDPA) can be derived from this measurement. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
LGWNumberOfEntries |
unsignedInt |
R |
The number of entries in the LGW table. |
- |
2.1 |
FAPService.{i}.CellConfig.UMTS.CN.PSDomain.RAB.Stats.LGW.{i}. |
object(0:) |
R |
This object provides statistics for the Direct User Plane Path between HNB and Local Gateway as defined in [3GPP-TS.32.452]. At most one entry in this table can exist with a given value for CorrelationID. |
- |
2.1 |
CorrelationID |
string |
R |
The value of this parameter is equal to the user plane GGSN TEID that the Gn-SGSN has received or the user plane PDN GW TEID that the S4-SGSN has received. [3GPP-TS.25.413]. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabDirectPathLGWAttNbr |
unsignedInt |
R |
This measurement provides the number of direct user plane path between HNB and Local GW attempted to setup. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabDirectPathLGWSuccNbr |
unsignedInt |
R |
This measurement provides the number of direct user plane path between HNB and Local GW successfully established. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabDirectPathLGWFailNbr |
string[] |
R |
This measurement provides the number of direct user plane path between HNB and Local GW RABs failed to setup by cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the cause name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.UMTS.CN.HHO. |
object |
R |
This object provides monitoring of the Hard Handover (HHO) properties in the HNB. |
- |
2.1 |
FAPService.{i}.CellConfig.UMTS.CN.HHO.Stats. |
object |
R |
This object provides the HHO statistics as defined in [3GPP-TS.32.452]. |
- |
2.1 |
SuccHnbUmtsIntraFreq |
unsignedInt |
R |
This measurement provides the number of successful HNB to UMTS macro cell intra frequency hard handovers. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
AttHnbUmtsIntraFreq |
unsignedInt |
R |
This measurement provides the number of attempted HNB to UMTS macro cell intra frequency hard handovers. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
AttHnbUmtsInterFreq |
unsignedInt |
R |
This measurement provides the number of attempted HNB to UMTS macro cell inter frequency hard handovers. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.UMTS.RAN. |
object |
R |
This object contains parameters relating to the RAN-level configuration. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.RRCTimers. |
object |
R |
This object contains parameters related to miscellaneous RRC timers and constants. |
- |
2.0 |
WaitTime |
unsignedInt(0:15) |
W |
Time period the UE has to wait before repeating the rejected procedure. This is an IE used when sending RRC connection reject, redirecting the requesting UE to another frequency. 0 indicates that repetition is not allowed. [Section 10.3.3.50/3GPP-TS.25.331]. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas. |
object |
R |
This object contains parameters relating to the intra-freq HO control parameters. |
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.IntraFreqMeas.Instance.{i}. |
object(0:) |
W |
Table containing parameters relating to a particular instance of intra-freq events. At most one entry in this table can exist with a given value for Alias, or with a given value for IntraFrequencyEventIdentity. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for Alias and IntraFrequencyEventIdentity such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas. |
object |
R |
This object contains parameters relating to the inter-freq HO related control parameters. |
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.InterFreqMeas.Instance.{i}. |
object(0:) |
W |
Table containing parameters relating to a particular instance of inter-freq events. At most one entry in this table can exist with a given value for Alias, or with a given value for IntraFrequencyEventIdentity. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for Alias and IntraFrequencyEventIdentity such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas. |
object |
R |
This object contains parameters relating to the inter-RAT HO related control parameters. This is specifically for GERAN system. |
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.InterRATMeas.Instance.{i}. |
object(0:) |
W |
Table containing parameters relating to a particular instance of inter-freq events. At most one entry in this table can exist with a given value for Alias, or with a given value for InterRATEventIdentity. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for Alias and InterRATEventIdentity such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.UEInternalMeas. |
object |
R |
This object contains parameters relating to the UE internal measurement control parameters. |
- |
2.0 |
UETxPwrThresholdEvent6a |
int(-50:33) |
W |
Defines the threshold for UE transmit power above which Event 6a is reported. [Section 10.3.7.80/3GPP-TS.25.331] Changes since 2.0:
|
- |
2.0 |
UETxPwrThresholdEvent6b |
int(-50:33) |
W |
Defines the threshold for UE transmit power above which Event 6b is reported. [Section 10.3.7.80/3GPP-TS.25.331] Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.RF. |
object |
R |
This object contains parameters relating to the RF configuration. |
- |
2.0 |
MaxULTxPowerInUse |
int(-50:33) |
R |
The maximum transmission power level a UE can use on PRACH. Self-configuration for maximum transmission power is controlled by Capabilities.UMTS.SelfConfig.MaxULTxPowerConfig from an availability perspective and FAPControl.UMTS.SelfConfig.MaxULTxPowerSelfConfigEnable from an enabled perspective. If the self-configuration capability is available and enabled, this parameter indicates the value selected by the FAP among the range provided in MaxULTxPower. If the self-configuration capability is not available or not enabled, then this parameter contains a value selected by the ACS. Changes since 2.0:
|
- |
2.0 |
FAPQualityTargetEcIo |
int(-200:0) |
W |
Defines the target value measured in dB for the downlink signal quality of the FAP in terms of CPICH Ec/Io, thereby clarifying the meaning of "FAPCoverageTarget". Actual values of the FAPQualityTargetEcIo are -20 dB to 0 dB in steps of 0.1 dB. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.NeighborList. |
object |
R |
This object contains parameters relating to the neighbor list. |
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.IntraFreqCell.{i}. |
object(0:) |
W |
Table containing the intra-frequency cell list provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible. At most one entry in this table can exist with a given value for PCPICHScramblingCode, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
MaxTxPower |
int(-300:600) |
W |
Cell Max Tx Power. Parameter needed in HNB power calibration, for protection of neighbour cells. Actual values of the power are -30.0 dBm to 60.0 dBm in steps of 0.1 dB. The value of MaxTxPower divided by 10 yields the actual value of the power. C.f [Section 6.3.11/3GPP-TS.32.642] [Section 6.2.1/3GPP-TS.25.104] Changes since 2.0:
|
0 |
2.0 |
MaxDPCHtxPower |
int(-400:500) |
W |
Maximum DL DPCH Tx Power per UE configured in the cell (for CS UEs). Parameter may be used by FAP to protect the DL budget allocated to neighbouring UEs served by neighbour cells. C.f (max 10 dB below max Tx power) [Section 6.3.11/3GPP-TS.32.642] [Section 6.2.1/3GPP-TS.25.104] Actual values of the power are -40.0 dBm to 50.0 dBm in steps of 0.1 dB. The value of MaxDPCHtxPower divided by 10 yields the actual value of the power. Changes since 2.0:
|
0 |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterFreqCell.{i}. |
object(0:) |
W |
Table containing the inter-frequency cell list provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible. At most one entry in this table can exist with the same values for both PCPICHScramblingCode and UARFCNDL, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for UARFCNDL and Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell. |
object |
R |
The inter-RAT cell lists separated by technology. [Section 10.3.7.23/3GPP-TS.25.331] |
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.NeighborList.InterRATCell.GSM.{i}. |
object(0:) |
W |
Table containing the inter-RAT cell list for GSM provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible. At most one entry in this table can exist with a given value for BCCHARFCN, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for BCCHARFCN and Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.UMTS.RAN.RRC. |
object |
R |
This object provides monitoring of the RRC in the HNB. |
- |
2.1 |
FAPService.{i}.CellConfig.UMTS.RAN.RRC.Stats. |
object |
R |
This object provides the RRC statistics as defined in [3GPP-TS.32.452]. |
- |
2.1 |
AttConnEstab |
string[] |
R |
This measurement provides the number of RRC connection establishment attempts by cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the cause name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FailConnEstab |
string[] |
R |
This measurement provides the number of RRC establishment failures by cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the cause name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
SuccConnEstab |
string[] |
R |
This measurement provides the number of successful RRC establishments by cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the cause name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE. |
object |
R |
This object contains parameters relating to configuring the LTE FAP. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.LTE.Tunnel.{i}. |
object(0:) |
W |
This object contains a table of all tunnel instances configured for the LTE FAP. At most one entry in this table can exist with a given value for TunnelRef, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for TunnelRef and Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
TunnelRef |
string(:256) |
W |
This is the reference to an IPsec tunnel instance used by the LTE FAP. For all root data models, which use the tunnel definition provided in {{bibref|TR-262}} (InternetGatewayDevice:1 {{bibref|TR-098}} and Device:1 {{bibref|TR-181i1}}) theThe TunnelRef MUST point to a row in the 'FAP.Tunnel.IKESA.{i}.' table, defined in {{bibref|TR-262}}. If the root data model used is Device:2 {{bibref|TR-181i2}} than the {{param}} MUST point toan IPsec tunnel instance defined in [TR-181i2]. If the referenced object is deleted, the parameter value MUST be set to an empty string. In case of a multiple-radio-technology FAP product, each radio technology can have its own tunnels or share common tunnels. In the former case, TunnelRef can contain a unique instance number. In the latter case, TunnelRef under all radio technologies can have the same instance number. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. |
- |
2.0 |
PLMNID |
string(:256)[] |
W |
Comma-separated list of strings (maximum number of characters per item 256). Optional list of PLMM IDs associated with the tunnel, which can be used for selecting the tunnel. Each PLMN ID consists of Mobile Country Code (MCC) and Mobile Network Code (MNC) [3GPP-TS.23.003], [3GPP-TS.24.008]. Mobile Country Code consists of three digits and uniquely identifies the country of domicile of the subscriber. Mobile Network Code consists of two or three digits and identifies the Home PLMN within a country. For a 2-digit MNC the total string length of PLMNID is 5. Changes since 2.0:
|
<Empty> |
2.0 |
FAPService.{i}.CellConfig.LTE.EPC. |
object |
R |
This object contains parameters relating to configuring LTE EPC. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.LTE.EPC.PLMNList.{i}. |
object(1:6) |
W |
This object contains parameters relating to list of PLMN identity specific to LTE EPC definition, called PLMN-IdentityList, as specified in SystemInformationBlockType1 message in [Section 6.2.2/3GPP-TS.36.331]. Each instance in this object is a PLMN-IdentityInfo which consists of plmn-Identity and cellReservedForOperatorUse IEs. At minimum 1 item MUST be present in this list, and maximum of 6 items. This table MUST contain at least 1 and at most 6 entries. At most one entry in this table can exist with a given value for PLMNID, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.LTE.EPC.QoS.{i}. |
object(0:) |
W |
This object contains parameters relating to configuring QoS in LTE EPC. At most one entry in this table can exist with a given value for QCI, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.LTE.EPC.HO. |
object |
R |
This object provides monitoring of the Handover (HO) properties in the HeNB. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.EPC.HO.Stats. |
object |
R |
This object provides the HO statistics as defined in [3GPP-TS.32.453]. |
- |
2.1 |
ToeNBAtt |
string[] |
R |
This measurement provides the number of attempted outbound handover to HeNB by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ToeNBSucc |
string[] |
R |
This measurement provides the number of successful outbound handover to HeNB by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ToeNBFail |
string[] |
R |
This measurement provides the number of failed outbound handover to HeNB by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FromeNBAtt |
string[] |
R |
This measurement provides the number of attempted inbound handover from HeNB by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FromeNBSucc |
string[] |
R |
This measurement provides the number of successful inbound handover from HeNB by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FromeNBFail |
string[] |
R |
This measurement provides the number of failed inbound handover from HeNB by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ToUtranAtt |
string[] |
R |
This measurement provides the number of attempted outbound handover to Utran by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ToUtranSucc |
string[] |
R |
This measurement provides the number of successful outbound handover to Utran by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ToUtranFail |
string[] |
R |
This measurement provides the number of failed outbound handover to Utran by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ToGeranAtt |
string[] |
R |
This measurement provides the number of attempted outbound handover to Geran by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ToGeranSucc |
string[] |
R |
This measurement provides the number of successful outbound handover to Geran by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
ToGeranFail |
string[] |
R |
This measurement provides the number of failed outbound handover to Geran by handover cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN. |
object |
R |
This object contains parameters relating to the LTE RAN level configuration. |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.PHY. |
object |
R |
This object contains parameters relating to the physical layer level configuration. |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN. |
object |
R |
This object contains parameters relating to the MBSFN (Multimedia Broadcast multicast service Single Frequency Network) configuration (see [Section 6.1.1.8/3GPP-TS.32.592]). |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.PHY.MBSFN.SFConfigList.{i}. |
object(0:) |
W |
This object contains parameters relating to the sub-frame that are reserved for MBSFN (Multimedia Broadcast multicast service Single Frequency Network) in downlink direction. For FDD mode, only one entry can exist in this table. For TDD mode, at most one entry can exist with a given value of stratumID (see [Section 6.1.1.8/3GPP-TS.32.592]). At most one entry in this table can exist with the same values for all of RadioFrameAllocationPeriod, RadioframeAllocationOffset and RadioFrameAllocationSize, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for RadioFrameAllocationPeriod, RadioframeAllocationOffset, RadioFrameAllocationSize and Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility. |
object |
R |
This object contains parameters relating to the UE's mobility configuration. It covers both idle mode and connected mode. |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode. |
object |
R |
This object contains parameters relating to the UE's mobility while it is in idle mode (cell (re-)selection). Parameters under this object determines the content in the SIB (System Information Block) that is broadcast by LTE . |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq. |
object |
R |
This object contains parameters relating to the idle mode mobility configuration for inter-freq re-selection scenario . |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.InterFreq.Carrier.{i}. |
object(0:) |
W |
This object contains parameters relating to the carrier information for inter-freq re-selection scenario (see [Section 6.1.5.1.3/3GPP-TS.32.592]). At most one entry in this table can exist with a given value for EUTRACarrierARFCN, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
QRxLevMinSIB5 |
string[1:](:256) |
W |
Comma-separated list (at least 1 item) (maximum number of characters 256) of strings. Each item is a required minimum received RSRP level on this E-UTRA frequency carrier, spcified in dBm, with a numeric range between -70 and -22 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of (QRxLevMinSIB5 * 2) yields the actual value. Corresponds to parameter q-rxLevMin in SIB5 in [Section 6.3.1/3GPP-TS.36.331] and in [Section 5.2.3.2/3GPP-TS.36.304]. The multiplicity of the QRxLevMinSIB5 values can also be expressed by defining a range using ".." (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: " Changes since 2.0:
|
0 |
2.0 |
QOffsetFreq |
string[1:](:128) |
W |
Comma-separated list (at least 1 item) (maximum number of characters 128) of strings. Each item is an offset applicable between serving and this frequency carrier, specified in dBm, with a numeric range between -24 and 24 inclusive. For values less than or equal to -6, or values greater than or equal to 6, only the even values are valid. If the value is other than these, the CPE MUST reject the value. In case there is more than one item in the list, the first item contains the most preferred value. The value of (QOffsetFreq * 2) yields the actual value. Corresponds to parameter q-OffsetFreq in SIB5 specified in [Section 6.3.1/3GPP-TS.36.331] and in [Section 5.4.2.6/3GPP-TS.36.304]. The multiplicity of the QOffsetFreq values can also be expressed by defining a range using ".." (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: " Changes since 2.0:
|
0 |
2.0 |
TReselectionEUTRA |
string[1:](:32) |
W |
Comma-separated list (at least 1 item) (maximum number of characters 32) of strings. Each item is a cell re-selection timer for inter-frequency cell re-selection to this E-UTRA frequency carrier, specified in seconds, with a numeric range between 0 and 7 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter t-ReselectionEUTRA specified in SIB5 in [Section 6.3.1/3GPP-TS.36.331] and in [Section 5.2.4.7/3GPP-TS.36.304]. The multiplicity of the TReselectionEUTRA values can also be expressed by defining a range using ".." (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: " Changes since 2.0:
|
0 |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT. |
object |
R |
This object contains parameters relating to the idle mode mobility configuration for inter-RAT (Radio Access Technology) re-selection scenario. |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA. |
object |
R |
This object contains parameters relating to the idle mode mobility configuration for inter-RAT (Radio Access Technology) re-selection, specifically for re-selection to UTRA (UMTS) scenario (see [Section 6.1.5.1.4/3GPP-TS.32.592]). |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.UTRA.UTRANFDDFreq.{i}. |
object(0:) |
W |
This object contains parameters relating to the channel frequncy related information of UTRA (UMTS) system (see [Section 6.1.5.1.5, 6.1.5.1.6/3GPP-TS.32.592]). At most one entry in this table can exist with a given value for UTRACarrierARFCN, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
QRxLevMin |
string[1:](:256) |
W |
Comma-separated list (at least 1 item) (maximum number of characters 256) of strings. Each item is a required minimum received RSCP level on this UTRA frequency carrier, specified in dBm, with a numeric range between -60 and -13 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of (QRxLevMin * 2 + 1) yields the actual value. Corresponds to parameter q-RxLevMin in SIB6 in [Section 6.3.1/3GPP-TS.36.331] and in [Section 5.2.3.1.2/3GPP-TS.25.304]. The multiplicity of the QRxLevMin values can also be expressed by defining a range using ".." (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: " Changes since 2.0:
|
-60 |
2.0 |
QQualMin |
string[1:](:128) |
W |
Comma-separated list (at least 1 item) (maximum number of characters 128) of strings. Each item is a required minimum received Ec/Io level on this UTRA FDD carrier, specified in dB, with a numeric range between -24 and 0 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. Corresponds to parameter q-QualMin in SIB6 in [Section 6.3.1/3GPP-TS.36.331] and in [Section 5.2.3.1.2/3GPP-TS.25.304]. The multiplicity of the QQualMin values can also be expressed by defining a range using ".." (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: " Changes since 2.0:
|
0 |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN. |
object |
R |
This object contains parameters relating to the idle mode mobility configuration for inter-RAT (Radio Access Technology) re-selection, specifically for re-selection to GERAN (GSM) scenario (see [Section 6.1.5.1.6/3GPP-TS.32.592]). |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.GERAN.GERANFreqGroup.{i}. |
object(0:) |
W |
This object contains parameters relating to the channel frequncy related information of GERAN (GSM) system (see [Section 6.1.5.1.7/3GPP-TS.32.592]). At most one entry in this table can exist with a given value for BCCHARFCN, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
QRxLevMin |
string[1:](:256) |
W |
Comma-separated list (at least 1 item) (maximum number of characters 256) of strings. Each item is a required minimum received RSSI level on this GERAN frequency carrier for re-selection to this UTRA FDD carrier, specified in dBm, with a numeric range between 0 and 63 inclusive. In case there is more than one item in the list, the first item contains the most preferred value. The value of (QRxLevMin * 2 - 115) yields the actual value. Corresponds to parameter q-rxLevMin in SIB7 in [Section 6.3.1/3GPP-TS.36.331] and to RXLEV_ACCESS_MIN in [3GPP-TS.45.008]. The multiplicity of the QRxLevMin values can also be expressed by defining a range using ".." (two periods) between two values. In this case, the combination of two values defines the lower-bound and upper-bound of the range inclusive. If this notation is used, then the list contains at least 2 items: " Changes since 2.0:
|
0 |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000. |
object |
R |
This object contains parameters relating to the idle mode mobility configuration for inter-RAT (Radio Access Technology) re-selection, specifically for re-selection to CDMA2000 system scenario (see [Section 6.1.5.1.8/3GPP-TS.32.592]). |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.Mobility.IdleMode.IRAT.CDMA2000.CDMA2000Band.{i}. |
object(0:) |
W |
This object contains parameters relating to the channel frequncy related information of CDMA2000 system (see [Section 6.1.5.1.8/3GPP-TS.32.592]). At most one entry in this table can exist with a given value for BandClass, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.NeighborList. |
object |
R |
This object contains parameters relating to the neighbor list. |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.NeighborList.LTECell.{i}. |
object(0:) |
W |
Table containing the E-UTRA (i.e. intra-RAT) cell list provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible. At most one entry in this table can exist with the same values for both PLMNID and CID, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. Changes since 2.0:
|
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
Blacklisted |
boolean |
W |
Indicates whether this neighbor cell is allowed for UEs as handover target or not. If true, handover is prohibited towards this cell. If false, handover is allowed toward this cell. The Blacklisted parameter allows this cell to be prohibited as a handover target, while still allowing this cell to be included in the BCCH SIB4 or 5. This parameter was DEPRECATED in 2.1.2 as it is being replaced with the Blocklisted parameter. Changes since 2.0:
|
false |
2.0 |
Blocklisted |
boolean |
W |
Indicates whether this neighbor cell is allowed for UEs as handover target or not. If true, handover is prohibited towards this cell. If false, handover is allowed toward this cell. The Blocklisted parameter allows this cell to be prohibited as a handover target, while still allowing this cell to be included in the BCCH SIB4 or 5. |
false |
2.1.2 |
FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell. |
object |
R |
The inter-RAT cell lists separated by technology. [Section 6.3.1 (SIB6, 7, 8)/3GPP-TS.36.331]. |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.UMTS.{i}. |
object(0:) |
W |
Table containing the inter-RAT cell list for UTRA (UMTS) provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible. At most one entry in this table can exist with the same values for both PLMNID and CID, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.GSM.{i}. |
object(0:) |
W |
Table containing the inter-RAT cell list for GERAN (GSM) provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible. At most one entry in this table can exist with the same values for all of PLMNID, LAC and CI, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.NeighborList.InterRATCell.CDMA2000.{i}. |
object(0:) |
W |
Table containing the inter-RAT cell list for CDMA2000 provided by the ACS. The table contents MAY be added/deleted/modified during operation, in which case these changes shall be reflected in the broadcast information as soon as possible. At most one entry in this table can exist with a given value for CID, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse. |
object |
R |
This object contains parameters relating to the neighbor list used by the FAP based on its self-configuration capability and CellConfig.LTE.RAN.NeighborList. configuration of adding and excluding cells. |
- |
2.0 |
FAPService.{i}.CellConfig.LTE.RAN.NeighborListInUse.LTECell.{i}. |
object(0:) |
R |
Table containing the LTE EUTRA (i.e. intra-RAT) cell list. At most one entry in this table can exist with the same values for both PLMNID and CID. Changes since 2.0:
|
- |
2.0 |
Blacklisted |
boolean |
R |
Indicates whether this neighbor cell is allowed for UEs as handover target or not. If true, handover is prohibited towards this cell. If false, handover is allowed toward this cell. The Blacklisted parameter allows this cell to be prohibited as a handover target, while still allowing this cell to be included in the BCCH SIB4 or 5. This parameter was DEPRECATED in 2.1.2 as it is being replaced with the Blocklisted parameter. Changes since 2.0:
|
- |
2.0 |
Blocklisted |
boolean |
R |
Indicates whether this neighbor cell is allowed for UEs as handover target or not. If true, handover is prohibited towards this cell. If false, handover is allowed toward this cell. The Blocklisted parameter allows this cell to be prohibited as a handover target, while still allowing this cell to be included in the BCCH SIB4 or 5. |
- |
2.1.2 |
FAPService.{i}.CellConfig.LTE.RAN.CSG. |
object |
R |
This object provides monitoring of Closed Subscriber Groups (CSG) in the HeNB. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN.CSG.Stats. |
object |
R |
This object provides the LTE RAN CSG statistics as defined in [3GPP-TS.32.453]. |
- |
2.1 |
MeanNbrUsr |
unsignedInt |
R |
This measurement provides the mean number of attached CSG UEs in the HeNB. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
AttInboundMobility |
unsignedInt |
R |
This measurement provides the number of attempted inbound mobility for UEs to CSG cells or hybrid cells in RRC_CONNECTED mode. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
SuccInboundMobility |
unsignedInt |
R |
This measurement provides the number of successful inbound mobility for UEs to CSG cells or hybrid cells in RRC_CONNECTED mode. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FailedInboundMobility |
string[] |
R |
This measurement provides the number of failed successful inbound mobility for UEs to CSG cells or hybrid cells in RRC_CONNECTED mode by cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the cause name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN.RRC. |
object |
R |
This object provides monitoring of the RRC in the HeNB. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN.RRC.Stats. |
object |
R |
This object provides the RRC statistics as defined in [3GPP-TS.32.453]. |
- |
2.1 |
AttConnEstab |
string[] |
R |
This measurement provides the number of RRC connection establishment attempts by cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the cause name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FailConnEstab |
string[] |
R |
This measurement provides the number of RRC establishment failures by cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the cause name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
SuccConnEstab |
string[] |
R |
This measurement provides the number of successful RRC establishments by cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the cause name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN.ERAB. |
object |
R |
This object provides monitoring of E-RABs in the HeNB. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN.ERAB.Stats. |
object |
R |
This object provides the E-RAB statistics as defined in [3GPP-TS.32.453]. |
- |
2.1 |
EstabInitAttNbr |
string[] |
R |
This measurement provides the number of initial E-RABs attempted to setup by QoS level (QCI). Comma-separated list of strings, where each item is defined as the "QCI level name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabInitSuccNbr |
string[] |
R |
This measurement provides the number of initial E-RABs successfully established QoS level (QCI). Comma-separated list of strings, where each item is defined as the "QCI level name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabInitFailNbr |
string[] |
R |
This measurement provides the number of initial E-RABs failed to setup by cause. Comma-separated list of strings, where each item is defined as the "QCI level name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabAttNbr |
string[] |
R |
This measurement provides the number of E-RABs attempted to setup by QoS level (QCI). Comma-separated list of strings, where each item is defined as the "QCI level name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabSuccNbr |
string[] |
R |
This measurement provides the number of E-RABs successfully established by QoS level (QCI). Comma-separated list of strings, where each item is defined as the "QCI level name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabFailNbr |
string[] |
R |
This measurement provides the number of E-RABs failed to setup by cause. Comma-separated list of strings, where each item is defined as the "QCI level name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
RelEnbNbrQCI |
string[] |
R |
This measurement provides the number of E-RABs requested to release initiated by HeNB by QCI. Comma-separated list of strings, where each item is defined as the "QCI level name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
RelEnbNbrCause |
string[] |
R |
This measurement provides the number of E-RABs requested to release initiated by HeNB by cause. Comma-separated list of strings, where each item is defined as the "QCI level name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
LGWNumberOfEntries |
unsignedInt |
R |
The number of entries in the LGW table. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN.ERAB.Stats.LGW.{i}. |
object(0:) |
R |
This object provides statistics for the Direct User Plane Path between HeNB and Local Gateway as defined in [3GPP-TS.32.453]. At most one entry in this table can exist with a given value for CorrelationID. |
- |
2.1 |
CorrelationID |
string |
R |
The value of this parameter is equal to the user plane PDN GW TEID (GTP-based S5) or GRE key (PMIP-based S5). [3GPP-TS.25.401]. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabDirectPathLGWAttNbr |
unsignedInt |
R |
This measurement provides the number of direct user plane path between HeNB and Local GW attempted to setup. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabDirectPathLGWSuccNbr |
unsignedInt |
R |
This measurement provides the number of direct user plane path between HeNB and Local GW successfully established. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
EstabDirectPathLGWFailNbr |
string[] |
R |
This measurement provides the number of direct user plane path between HeNB and Local GW E-RABs failed to setup by cause. Comma-separated list of strings, where each item is defined as the "cause name=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN.DRB. |
object |
R |
This object provides monitoring of Data Radio Bearers (DRB) in the HeNB. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN.DRB.Stats. |
object |
R |
This object provides the DRB statistics as defined in [3GPP-TS.32.453]. |
- |
2.1 |
PdcpSduBitrateDl |
string[] |
R |
This measurement provides the average cell bit-rate of PDCP SDUs on the downlink. This represents the ingress rate of user plane traffic to the HeNB (via S1) by SAE Bearer QoS level (QCI). Comma-separated list of strings, where each item is defined as the "QCI level=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
PdcpSduBitrateUl |
string[] |
R |
This measurement provides the average cell bit-rate of PDCP SDUs on the uplink. This represents successful transmissions of user plane traffic; control signalling and retransmissions are excluded from this measure. Measurement is by SAE Bearer QoS level (QCI). Comma-separated list of strings, where each item is defined as the "QCI level=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
PdcpSduBitrateDlMax |
unsignedInt |
R |
This measurement provides the maximum cell bit-rate of PDCP SDUs on the downlink. This represents the maximum ingress rate of user plane traffic to the HeNB (via S1). This is a sum counter measured across all QCIs. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
PdcpSduBitrateUlMax |
unsignedInt |
R |
This measurement provides the maximum cell bit-rate of PDCP SDUs measured on the uplink. This represents successful transmissions of user plane traffic; control signalling and retransmissions are excluded from this measure. This is a sum counter measured across all QCIs. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
PdcpSduDelayDl |
string[] |
R |
This measurement provides the average (arithmetic mean) PDCP SDU delay on the downlink by ERAB Bearer QoS level (QCI). Comma-separated list of strings, where each item is defined as the "QCI level=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
PdcpSduDropRateDl |
string[] |
R |
This measurement provides the fraction of IP packets (PDCP SDUs) which are dropped on the downlink by ERAB Bearer QoS level (QCI). Only user-plane traffic (DTCH) is considered. A dropped packet is one whose context is removed from the HeNB without any part of it having been transmitted on the air interface. Packets discarded during handover are excluded from the count. Comma-separated list of strings, where each item is defined as the "QCI level=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
PdcpSduAirLossRateDl |
string[] |
R |
This measurement provides the fraction of IP packets (PDCP SDUs) which are lost (not successfully transmitted) on the downlink air interface by ERAB Bearer QoS level (QCI). Only user-plane traffic (DTCH) is considered. A lost packet is one whose context is removed from the HeNB after an attempt has been made to transmit part or all of the packet on the air interface but the whole packet has not been successfully transmittedafter an attempt has been made to transmit part or all of the packet on the air interface but the whole packet has not been successfully transmitted. Comma-separated list of strings, where each item is defined as the "QCI level=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
PdcpSduLossRateUl |
string[] |
R |
This measurement provides the fraction of IP packets (PDCP SDUs) which are lost (not successfully received) on the uplink by ERAB Bearer QoS level (QCI). Only user-plane traffic (DTCH) and only PDCP SDUs that have entered PDCP (and given a PDCP sequence number) are considered. Comma-separated list of strings, where each item is defined as the "QCI level=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
UEActiveDl |
string[] |
R |
This measurement provides the average number of UEs that have user-plane (DTCH) data queued on the downlink by ERAB Bearer QoS level (QCI). Comma-separated list of strings, where each item is defined as the "QCI level=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
UEActiveUl |
string[] |
R |
This measurement provides the average number of UEs that have user-plane (DTCH) data queued on the uplink by ERAB Bearer QoS level (QCI). Comma-separated list of strings, where each item is defined as the "QCI level=measurement value". The total of all the measurements is provided using the name= "sum". Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN.RRU. |
object |
R |
This object provides monitoring of the Radio Resource Usage in the HeNB. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.RAN.RRU.Stats. |
object |
R |
This object provides the RRU statistics as defined in [3GPP-TS.32.453]. |
- |
2.1 |
PrbTotDl |
unsignedInt(0:100) |
R |
This measurement provides the total usage, in percentage, of physical resource blocks (PRBs) on the downlink for any purpose. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
PrbTotUl |
unsignedInt(0:100) |
R |
This measurement provides the total usage, in percentage, of physical resource blocks (PRBs) on the uplink for any purpose. Value Change Notification requests for this parameter MAY be denied. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.EnergySavings. |
object |
R |
This object provides for the managment of energy savings capabilities in the HeNB. |
- |
2.1 |
Enable |
boolean |
W |
This attribute determines whether the energy saving function is enabled or disabled. |
- |
2.1 |
State |
string |
R |
Specifies the status regarding the energy saving in the cell. This parameter is applicable when the value of Enable is true. Enumeration of:
|
- |
2.1 |
NotAllowedTimePeriodNumberOfEntries |
unsignedInt |
R |
The number of entries in the NotAllowedTimePeriod table. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.EnergySavings.ActivationCandidateCellsLoad. |
object |
R |
This object is relevant if the cell acts as a candidate cell. This object indicates the traffic load threshold and the time duration, which are used by distributed energy saving algorithms to allow an ‘original’ cell to enter the energy saving state. Threshold and TimeDuration are applied to the candidate cell(s) which provide coverage backup of an original cell when it is in the energy saving state. |
- |
2.1 |
Threshold |
unsignedInt(:100) |
W |
PRB usage as a percent [3GPP-TS.36.314]. The threshold applies in the same way for a candidate cell no matter which original cell it will provide backup coverage. |
- |
2.1 |
TimeDuration |
unsignedInt |
W |
This parameter indicates how long the traffic in the candidate cell needs to have been below the threshold, in seconds, before any original cells which will be provided backup coverage by the candidate cell enters energy saving state. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.EnergySavings.DeactivationCandidateCellsLoad. |
object |
R |
This object is relevant if the cell acts as a candidate cell. This object indicates the traffic load threshold and the time duration which is used by distributed energy saving algorithms to allow a cell to leave the energy saving state. Threshold and time duration are applied to the candidate cell when it provides coverage backup for the cell in energy saving state. |
- |
2.1 |
Threshold |
unsignedInt(:100) |
W |
PRB usage as a percent [3GPP-TS.36.314]. The threshold applies in the same way for a candidate cell, no matter for which original cell it provides backup coverage. |
- |
2.1 |
TimeDuration |
unsignedInt |
W |
This parameter indicates how long the traffic in the candidate cell needs to have been above the threshold, in seconds, to wake up one or more original cells which have been provided backup coverage by the candidate cell. |
- |
2.1 |
FAPService.{i}.CellConfig.LTE.EnergySavings.NotAllowedTimePeriod.{i}. |
object(0:) |
W |
This object provides a time period for which energy saving is not allowed. This object can be used to prevent a cell entering energy saving state. This object is valid on the specified day(s) and time of every week. |
- |
2.1 |
Enable |
boolean |
W |
This attribute determines whether the time period is enabled or disabled. |
- |
2.1 |
StartTime |
string |
W |
Starting time for this time period formatted as "HH:MM:SS" in UTC. |
- |
2.1 |
EndTime |
string |
W |
Ending time for this time period formatted as "HH:MM:SS" in UTC. |
- |
2.1 |
DaysOfWeek |
string[] |
W |
Comma-separated list of strings, that represents the days of the week that are effective for this time period. Each list item is an enumeration of:
|
- |
2.1 |
FAPService.{i}.CellConfig.CDMA2000. |
object |
R |
This object contains parameters relating to configuring the CDMA2000 FAP. |
- |
2.0 |
TunnelInstance |
string(:256) |
W |
This is the reference to the IPsec tunnel instance used by the CDMA2000 FAP. For all root data models, which use the tunnel definition provided in {{bibref|TR-262}} (InternetGatewayDevice:1 {{bibref|TR-098}} and Device:1 {{bibref|TR-181i1}}) theThe TunnelInstance MUST point to a row in the 'FAP.Tunnel.IKESA.{i}.' table, defined in {{bibref|TR-262}}. If the root data model used is Device:2 {{bibref|TR-181i2}} than the {{param}} MUST point toan IPsec tunnel instance defined in [TR-181i2]. If the referenced object is deleted, the parameter value MUST be set to an empty string. In case of a multiple-radio-technology FAP product, each radio technology can have its own tunnels or share common tunnels. In the former case, TunnelInstance can contain a unique instance number. In the latter case, TunnelInstance under all radio technologies can have the same instance number. |
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.OneX. |
object |
R |
This object contains parameters relating to configuring the CDMA2000 1x FAP. |
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.OneX.RAN. |
object |
R |
This object contains parameters relating to RAN configuring the CDMA2000 1x FAP. |
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.AccessParameters. |
object |
R |
The object used for configuring access parameter messages for 1x. See [3GPP2-C.S0005]. |
- |
2.0 |
NomPwrExt |
unsignedInt(0:1) |
W |
NomPwrExt should be zero for BC0 and BC1. For other band classes, NomPwrExt is 1 if Mobile's correction factor is between -24dBm and -9dBm. Otherwise NomPwrExt is zero. See [3GPP2-C.S0005]. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.NeighborList.{i}. |
object(0:) |
W |
This object contains information common to all neighbors of a sector. This object has only one instance. At most one entry in this table can exist with the same values for both OneXNeighborIndex and NeighborPN, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM. |
object |
R |
This object can be configured only if Capabilities.CDMA2000.OneX.FemtoOverheadMessagesCapable is set to true. |
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.OneX.RAN.APPIM.APPIREC.{i}. |
object(0:) |
W |
This object can be configured only if Capabilities.CDMA2000.OneX.FemtoOverheadMessagesCapable is set to true. At most one entry in this table can exist with the same values for all of APSID, APNID, APBAND, APFREQ, APPNRECTYPE, APPNRECLEN and APPNREC, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}. |
object(0:) |
W |
The Batch configuration Object used to configure PDSN table using a start and end IP address. The order of the address is used as part of PDSN selection algorithm, e.g., the first element is considered PDSN number 0. (Refer to [3GPP2-A.S0013]). To get individual PDSN entries use the CellConfig.CDMA2000.OneX.PCFPDSN.{i}.. At most one entry in this table can exist with a given value for BatchTableNumber, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.OneX.PCFPDSN.{i}. |
object(0:) |
W |
PCFPDSN Object configured for 1x. CellConfig.CDMA2000.OneX.BatchPCFPDSN.{i}. table should be used to configure PDSN details. At most one entry in this table can exist with the same values for all of PDSNNumber, SecurityParameterIndex and SecurityKey, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.OneX.Stats. |
object |
R |
This object contains 1x FAP statistics aggregated over all connections of all users over all sectors. |
- |
2.0 |
TotalVoiceCalls |
unsignedInt(0:4294967295) |
R |
Total number of successful voice calls Value Change Notification requests for this parameter MAY be denied. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.HRPD. |
object |
R |
The object contains attributes related to HRPD. |
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN. |
object |
R |
The object contains attributes related to HRPD RAN. |
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.HRPD.RAN.RF. |
object |
R |
Contains the details related to HRPD RF |
- |
2.0 |
RSSIRABThreshold |
int(-1600:1600) |
W |
RAB threshold for RSSI based RAB algorithm. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}. |
object(0:) |
W |
The Batch configuration Object used to configure PDSN table using a start and end IP address. The order of the address is used as part of PDSN selection algorithm, e.g., the first element is considered PDSN number 0 (refer to [3GPP2-A.S0008] and [3GPP2-A.S0009]). To get individual PDSN entries use the CellConfig.CDMA2000.HRPD.PCFPDSN.{i}.. At most one entry in this table can exist with the same values for all of BatchTableNumber, BatchTableSecurityParameterIndex and BatchTableSecretKey, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.HRPD.PCFPDSN.{i}. |
object(0:) |
W |
PCFPDSN Object configured for HRPD. CellConfig.CDMA2000.HRPD.BatchPCFPDSN.{i}. table should be used to configure PDSN details. At most one entry in this table can exist with the same values for all of PDSNNumber, SecurityParameterIndex and SecurityKey, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.HRPD.CallControlStats. |
object |
R |
Details on call control stats |
- |
2.0 |
NumForwardRLPBytes |
unsignedInt |
R |
Number of HRPD packets(bytes) sent from PDSN to AT. Value Change Notification requests for this parameter MAY be denied. Changes since 2.0:
|
- |
2.0 |
NumReverseRLPBytes |
unsignedInt |
R |
No. of HRPD packets(bytes) sent from AT to PDSN. Value Change Notification requests for this parameter MAY be denied. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.Beacon. |
object |
R |
This object models the attributes to control the generalized beacon. The beacon is modeled as a beacon frame composed of multiple beacon intervals. The beacon frame start is time-aligned to the instant when 1x 80ms paging frames and HRPD control channel frames align (occurs once every 1.28s). |
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.Beacon.BeaconList.{i}. |
object(0:) |
W |
This object models an individual beacon intervals. It may be used to model both 1x and HRPD beacons with offset from start of beacon frame measured in 80ms slots. At most one entry in this table can exist with a given value for BeaconIndex, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.CellConfig.CDMA2000.Beacon.HRPDBeaconList.{i}. |
object(0:) |
W |
This object models individual HRPD beacon intervals where the beacon start is expressed as a number of HRPD control channel slots from the start of the beacon frame. At most one entry in this table can exist with a given value for BeaconIndex, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
BeaconPNOffset |
string(:256)[1:] |
W |
Comma-separated list (at least 1 item) of strings (maximum number of characters per item 256). Each item is a pilot PN offset of the pilot beacon for this channel in units of 64 PN chips. If this parameter contains more than one item, then the FAP is expected to select one from the list as the PilotPN to be used for this channel. If the self-configuration capability is not to be used, then this parameter SHALL contain only a single item. Changes since 2.0:
|
<Empty> |
2.0 |
TxPower |
int(-40:20) |
W |
TX power for the beacon interval. If self-configuration of the HRPD Beacon Tx Power is enabled, then this value is determined by the FAP. Changes since 2.0:
|
-40 |
2.0 |
FAPService.{i}.REM. |
object |
R |
This object contains parameters relating to REM (Radio Environment Measurement). |
- |
2.0 |
FAPService.{i}.REM.LTE. |
object |
R |
This object contains parameters relating to radio environment measurement capabilities for the LTE system. |
- |
2.0 |
FAPService.{i}.REM.LTE.CarrierMeas.{i}. |
object(0:) |
W |
Table indicating the measurement of the discovered carrier. The information stored in this object is strictly in the physical layer level and may not necessarily be associated with any particular E-UTRAN cell (e.g. interference level generated by sources other than E-UTRAN cell). At most one entry in this table can exist with the same values for both CarrierARFCNDL and CarrierChWidth, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose initial values for CarrierARFCNDL, CarrierChWidth and Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
CarrierRSSI |
int(-100:-25) |
R |
Received Signal Strength Indicator (RSSI) as specified in [Sec 5.1.3/3GPP-TS.36.214] over the carrier frequency range from CarrierARFCNDL as the lower bound and the value of (CarrierARFCNDL + CarrierChWidth) as the upper bound. Changes since 2.0:
|
- |
2.0 |
FAPService.{i}.REM.CDMA2000. |
object |
R |
This object contains parameters relating to radio environment measurement capabilities for the CDMA2000 system. |
- |
2.0 |
FAPService.{i}.REM.CDMA2000.OneX. |
object |
R |
This object contains parameters relating to radio environment measurement capabilities for the 1x system. |
- |
2.0 |
FAPService.{i}.REM.CDMA2000.OneX.Channel.{i}. |
object(0:) |
W |
REM specific configuration and reporting. At most one entry in this table can exist with the same values for all of SniffingBandClass, SniffingChannelNumber and PNList, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
PNList |
string(:256)[] |
W |
Comma-separated list of strings (maximum number of characters per item 256). Each item is a (single value) PN offset in units of 64 PN
chips or PNrange expressed in the following format:
Changes since 2.0:
|
<Empty> |
2.0 |
FAPService.{i}.REM.CDMA2000.HRPD. |
object |
R |
This object contains parameters relating to radio environment measurement capabilities for the HRPD system. |
- |
2.0 |
FAPService.{i}.REM.CDMA2000.HRPD.Channel.{i}. |
object(0:) |
W |
REM specific configuration and reporting. At most one entry in this table can exist with the same values for all of SniffingBandClass, SniffingChannelNumber and PNList, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
PNList |
string(:256)[] |
W |
Comma-separated list of strings (maximum number of characters per item 256). Each item is a (single value) PN offset in units of 64 PN
chips or PNrange expressed in the following format:
Changes since 2.0:
|
<Empty> |
2.0 |
FAPService.{i}.REM.CDMA2000.MacroTiming. |
object |
R |
Parameters for controlling CDMA2000 system timing derived from macro system sniffing. |
- |
2.0 |
FAPService.{i}.REM.CDMA2000.MacroTiming.Channel.{i}. |
object(0:) |
W |
Object used to configure list of channels to be used for Macto Timing. At most one entry in this table can exist with the same values for both BandClass and ChannelNumber, or with a given value for Alias. On creation of a new table entry, the Agent MUST (if not supplied by the Controller on creation) choose an initial value for Alias such that the new entry does not conflict with any existing entries. |
- |
2.0 |
Alias |
string(:64) |
WO |
[Alias] A non-volatile unique key used to reference this instance. Alias provides a mechanism for a Controller to label this instance for future reference. The following mandatory constraints MUST be enforced:
Once it's been set, this parameter is immutable. If the value isn't assigned by the Controller on creation, the Agent MUST choose an initial value that doesn't conflict with any existing entries. This is a non-functional key and its value MUST NOT change once it's been assigned by the Controller or set internally by the Agent. Changes since 2.0:
|
- |
2.0 |
PNList |
string(:256)[] |
W |
Comma-separated list of strings (maximum number of characters per item 256). Each item is a (single value) PN offset in units of 64 PN chips or PNrange expressed in the following format: If an empty string, then no specific PNList is provided, meaning that the FAP is required to pick a PN list to scan on its own. Changes since 2.0:
|
<Empty> |
2.0 |
Generated by Broadband Forum bbfreport v2.3.1 (2025-04-11 version) on 2025-04-23 at 14:10:02 UTC.
report.py --include ../../install/cwmp --output tr-196-2-1-2-usp-diffs.html --show --transform diff --format html tr-196-2-0-3.xml tr-196-2-1-2-usp.xml